Why is the clone stamp no longer transparent?

When I try to clone in versions beyond PS3 the clone stamp is not transparent. I can't see what's underneath, it got fuzzy pixels.
How can I set this to behave the way it used to.
Thanks.
MK

In the Window>Clone Source panel you can adjust how the overlay is shown.
For example, i usually have it set to show the overlay, clipped and opacity at 50%.
It's really a matter of preference though, so you might try some of the different settings and see which one(s) work for you
or you can simply turn the overlay off if that suits you.

Similar Messages

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • PS CS5 Extended on Windows -  When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  W

    PS CS5 Extended on Windows
    When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  This just started tonight.  What's causing this weird behaviour?

    What are the settings in Window > Clone Source?

  • My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

    My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
    The below items appeared when I opened Photoshop CS 5:
    “Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
    (I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

    For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
    If so, check Clipped and see if that makes a difference.
    (Window>Clone Source)
    As to the video card problem:
    Which version of windows are you using?
    What is the make and model of your graphics card?
    Do you know which update windows installed?

  • "Could not use the clone stamp tool because of a program error". How to fix this fault?

    When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
    I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

    Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

  • Problem using the clone stamp tool in cs6 64 bit

    I am trying to use the clone stamp tool, however each time I alt click  on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.

    If »Show Overlay« is checked in the Clone Source Panel is the cursor showing the source imagery?
    Could you please post a screenshot with the pertinent Panels visible?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • How do I unable the preview in the clone stamp tool in elements 11

    How do I unable the preview, in the clone stamp in elements 11. I find it more anoying than usefull

    If this is a question for Photoshop Elements, you should probably post it to the Photoshop Elements forum, Hazyy.
    http://forums.adobe.com/community/photoshop_elements

  • Why are the download options no longer categorized as in flv, WMP, MP3 etc?

    Why are the download options no longer categorized as in flv, WMP, MP3 etc?
    All one gets from the download drop-down menu is:
    (480p), (240p) or (360p) for example and the name of the video of course.
    The way it is now, I cannot identify the type of video I am downloading as I could before.
    Thanks!

    Ubi,
    Your assumptions are incorrect. Not all Youtube videos are offered in other formats; some are only offered in FLV format. Generally, only the very HD ones are offered in MP4. The format in which videos are offered are the decision of Youtube and/or the original poster of the video.
    I opted to not pay for the VDH converter. There are FREE converters that will convert FLV to other formats, but they do not interface with VDH. Even the VDH converter is a 2-step process (in both manual or automatic mode). The converter that is included free with VDH will put an ugly icon/watermark on your converted video--every frame of the video. To find a free converter, just Google "free flv converter" (with the quotation marks).

  • Having upgraded to Yomite, why is the contacts icon no longer in my mail tool bar?

    Having upgraded to Yomite, why is the contacts icon no longer in my mail tool bar?

    address browser in Yosemite Mail - it's GONE? | Apple Support ...

  • HT1368 why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

    why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

    The 'buy all' has, for some reason, been removed from the current version of iTunes - you can try leaving feedback for Apple and maybe it'll be added back in a future update :http://www.apple.com/feedback/itunesapp.html . Until then you can only buy items individually.
    In terms of the 'x' for deleting items from it, other people have posted about that and it's affecting me as well. I assume that there is a bug with the current version of iTunes and/or a problem at Apple's end which they need to fix.

  • Why is the MacBook Pro no longer available in a 17" screen?

    Why is the MacBook Pro no longer available in a 17" screen?

    No one here knows why Apple decided to discontinue the 17" screen.  This is a user to user community.  Click on the Contact Us link at the bottom of this website.  Write a letter to Apple & ask them.  If they respond please post it. 

  • The clone stamp will not work in AE CC

    When I click on the clone stamp tool, nothing changes and I'm unable to use the tool. The clone stamp symbol becomes highlighted, but the curser doesn't change to a circle over the image and just stays as an arrow. When I try to sample an area by holding down alt/option, nothing happens and I am unable to do anything. Does anyone have any help for this problem?

    The Clone Stamp tool works in a layer source window, not the main comp viewer window.  Double click on your target layer in the timeline to open its layer source viewer.

  • In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

    I don't quite know how to use the clone stamp tool in the Photoshop 2014 version.  When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct.  How do you lock it down to keep it from moving?

    Hi Smoothery4501,
    The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
    Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
    Please refer to below blog for further info
    Clone Stamp Tool « Julieanne Kost's Blog
    Thanks

  • Program error when trying to use the clone stamp tool - PSE 8

    When trying to use the CLONE STAMP TOOL, getting the following:  "Could not use the clone stamp tool because of a program error".
    Runnng PSE 8 on Windows XP/SP3.  I purchased the key to have a full version, versus the 'trial version'.  I also have Photo Essentials 3 installed and have used it without any problems.
    Any suggestions?

    I figured it out - it was ID 10 T error...ugh.
    Was following along in a book and blindly did what it said....was forgetting to hit the 'alt' key when first defining the area to clone....
    However, it was kind of a confusing error message - something like "clone area not defined" would be more of a help.
    thanks.

  • The Clone Stamp is not showing in the side toolbar

    Hi -
    I recently needed to reinstall Photoshop on my PC and for some reason the Clone/Stamp tool is not showing up.  All the other tools are where they should be but for some reason the clone / stamp tool is just not there (see image below).  Any help would be greatly appreciated.

    Does the clone stamp tool appear if you press the letter S on your keyboard?
    There are multiple tool choices if you right-click on the icons displayed with corners.

Maybe you are looking for