Why is the coating of iPhone 5 black phone comes off within sometime

coating of the black iphone 5 wears off. customer care as an exception replaced the phone. requested them to replace with the white iphone as black phone has an issue. after getting a replacepment the coating came off within 2 months of usage.

Thx Rojmer for your prompt reply. Let me tell u thats not the case. i have iphone 4 which is still in immaculate condition after using it for couple of years. i do not keep my phone in my pocket. i have many friends facing the same problem and the videos on youtube reconfirm the same. which is why i had insisted on getting a replacement in white color as it does not have any coating on it. the quality is detoriating. we put in our hard earn money to buy expensive smart phones and what u get is a sub standard product. NOT ACCEPTABLE

Similar Messages

  • Where is the A2DP why it isn't in iPhone all phones have the A2DP

    Where is the A2DP where I want to know why it isn't in iPhone all phones have it the iPhone must have it also it's the best mobile in the world it must have the A2DP I repeat

    ALL phones as in 100% of ALL phones do not include this.
    A2DP will be included with firmware update 3.0 to be released this summer, but will apply to the iPhone 3G only. This will not be supported with the first generation iPhone.

  • Why do the sound and volume go in and out.  Sometimes my iPhone and iPad loose the sound and volume

    Why do the sound and volume go in and out.  Sometimes my iPhone and iPad loose the sound and volume

    It should remain the way you have adjusted them.  Delete the System Preferences.plist per these instructions:
    https://discussions.apple.com/docs/DOC-4301
    Ciao.

  • HT5012 why my battery drop faster n my phone switch off although have 15% after upadate ios 7.1?

    why my battery drop faster n my phone switch off although have 15% after upadate ios 7.1?

    Battery optimization: http://www.apple.com/batteries/iphone.html
    Another article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • IPhone 4S - phone switches off before battery percentage has got to 0

    iPhone 4S - phone switches off before battery percentage has gone to 0 - usually switches off when it's between 20-30%.
    When I try the force restart it has the battery sign.  (Home Button+Power button)
    When I plug the charger in it starts charging  from the point it shut off, 20-30%.
    Have tried reset all settings.
    Have done a restore and setup as a new phone.
    Any way I can get it start charging from 0 instead of where it shut off (20-30%) ?

    Bit of a trek to the Apple store + i can't really send it off as I'm using it all the time.
    Anything I can do to recalibrate or reset it so battery drains and starts to charge from 0, before I have to go to the Apple store?

  • The home button on my phone won't work sometime

    the home button on my phone won't work sometime, ill press the button and it won't return me to the home screen? why is this?
    the phone has 13 gibs of open memory, is there a reason for this?

    Is it stuck, or just unresponsive?
    Hardware Defect: Home or Power Button
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • IPhone 5 phone goes off on camera use

    Whenever I use a camera with flash, even with battery life around 35% , the phone goes off within 2-3 clicks. As I start it back, battery life is same. My phone is just an year old and this is very often now, is there a solution to this?

    Try a reset, which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.

  • Why do the screens on my Mac Book fly off to the side?

    Why do the screens on my Mac Book fly off to the side?  Scrolling and clicking on open programs bring back the screens BUT I don't want them to disappear in the first place.  Help?

    Just realized this is occuring on an older Mac with 10.6.8 system, so no Mission Control.  But I did change hot corner settings to do nothing and we'll see how that goes.
    Thanks very much.

  • HT1423 the memory-access door won't come off, HELP!

    Hi,
    I have a mid-2007 iMac with 1 GB of ram and i'm trying to replace it, but the memory-access door won't come off. i loosen the screw with a screw driver but it won't open and i don't know why. i want to upgrade to 4 GB.
    is there some trick to opening it thats not stated in this article? please help me, i don't know what to do :-( i really need to get lion on this thing and can't do that without a RAM update.

    Some times there's a bit of prying in order with a thin blade.
    http://eshop.macsales.com/installvideos/imac_mid_2007_mem/

  • My iphone 5 screen comes off

    My iPhone 5 screen comes off at the right side of my screen. When i push it, I can hear it comes off. I can feel this too...
    What can I do about this?

    Contact Apple to get it serviced or visit an Apple Store next to your place to have it checked:
    Apple - Support - Service Answer Center

  • Why is the first video frame black?

    Why is the first frame black?  How can I fix this?  When I edit a video, which includes removing the first second, and render it using medium quality H.264, the first frame is black in QuickTime, and the first second or two of video is black in HTML5 Video on the web.  When I load it in PS CS6 Extended, the first frames do not appear black.  When I render in low quality I don't get black frames but HTML5 Video looks terrible in Internet Explorer.   Thanks.

    Why is the first frame black?  How can I fix this?  When I edit a video, which includes removing the first second, and render it using medium quality H.264, the first frame is black in QuickTime, and the first second or two of video is black in HTML5 Video on the web.  When I load it in PS CS6 Extended, the first frames do not appear black.  When I render in low quality I don't get black frames but HTML5 Video looks terrible in Internet Explorer.   Thanks.

  • Why does the music app on my phone keep skipping songs?

    My music app on my iPhone 4S keeps skipping songs. It will show the album
    cover for a second then it will skip right to the next song and sometimes it will
    skip multiple songs. For example, once it skipped over an entire playlist and
    went to the screen at the end when it showed all of the songs in the playlist.
    I have update 6.0.1 and I haven't used the music app since the last update.
    Any help would be much appreciated.

    Mine is 18.2Mb it gets to about 37mb tops, Try logging out of the app, remove all apps that are running in the background then shut your phone down and restart, if that does not work hold the power and home button and do a hard reset. You shouldnt loose any data at all but make sure you back up anyway before hand, its just like a forced reboot of a computer really.

  • Why is the Packager for iPhone guide for Flash CS5 and not Flash Builder?

    Following this tutorial, I gave compiling an iPhone project via the command line a shot and found it very difficult. The commands are not clearly explained and have character errors (“ ” instead of " ", \ instead of /, etc.).
    I've also downloaded the pdf that comes with the Packager for iPhone and tried to follow along, but the explanations are for developing in the Flash CS5 IDE...why is that? It seems that Flash Builder would be the logical development environment for developers and a dev guide...
    Can anyone explain or perhaps direct me to an easier, more official tutorial on developing iPhone applications in Flash Builder? Thank you!

    Because Flash CS5 users need more help than us Flex devs. jk
    The "Packager for iPhone" was depreciated some time ago, so I imagine you are reading some old docs. Now (since FB 4.5), it's just another target platform in a Flex Mobile Project. Before then it was part of the ADT compiler which could be run in ANT (or a really long command line string), and before then it was actually the "packager for iPhone".
    If you do not have FB 4.5 then maybe you can provide more info on the challenges your facing, and someone may be able to point you in the right direction.
    You may also want to give this a read: http://help.adobe.com/en_US/flex/mobileapps/WS064a3073e805330f6c6abf312e7545f65e-8000.html

  • Why does the "find my iphone" ap say i'm not connected to the internet when i clearly am?

    I can see web pages, update facebook status, tweet, etc. but this ap says i'm not connected to the internet (wifi and Verizon LTE).  Also, why does the podcast ap say its unable to authorize to automatically update my podcasts (which automatically download to my mac book pro every day without a problem)?

    Go here:
    Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
    and confirm that it's set to the correct country for your account. If it is, try signing out of your account and back in.
    Hope this helps.

  • Anti-reflective coating on iPhone camera lense wearing off

    In the past few days, I've noticed that the anti-reflective coating on my iPhone lense has begun to wear off in blotches, producing a "rainbow" effect when observed in the proper room lighting. I purchased this phone on June 30, keep it stored in a Marware Sportsuit case that completely envelopes the device, and only use iKlear to clean the device every few days.
    Although this doesn't seem to affect photos shot from indoors, it does seem to be producing funny lighting "spots" when shooting outdoors.
    I'm curious to know who else out there is noticing this with their iPhone and, if so and you've contacted Apple for assistance, what sort of response did you receive? Was it handled under AppleCare, did you have to send it in or was a replacement provided in-store, etc?
    TIA

    Yesterday I made an appt with a genius and we compared my camera with his. Pointed them both side by side at the overhead lights in the Apple Store. We could plainly see the haze on my phone most pronounced on the illuminated signs that say 'Kids', 'Peripherals' or whatever.
    The genius said it would have to be sent for repair or replacement - he wasn't sure of course whether they would actually replace the lens or just send me a new iPhone. I'm guessing they'll just send me a new one though b/c it would seem pretty crazy for them to actually repair it. I haven't looked at disassembly photos of the iPhone but maybe the lens cover is part of the back metallic case cover and can be easily swapped out?
    Either way I'm sure they'll take care of it. I did get a loaner iPhone and had some minor issues getting that going but that's another story.
    Another note - while waiting in the store I checked out another customer's iPhone that was bringing his in for some other problem looked at his lens and it had spots on it that wouldn't come off as well.
    While I have the loaner I'm going to experiment with applying some sort of screen protector material to cover the lens so I'm ready to preserve mine when it comes back!

Maybe you are looking for

  • DW CS3 Refusal to Install - No Beta Use! (WinXPsp2)

    I have tried and tried again to install DW CS3 on WinXP SP2 with no results. I have never used the CS3 betas as this is a production machine. Every time, it only installs the Shared components and then fails to install Dreamweaver. I still have DW8 i

  • Connecting to a database- next field button problem

    Hi, I really need help. I'm creating a template where the "First Name" and "Last Name" fields automatically populates when the user clicks a "connect" button. This button will then connect to their local database. I haven't been able to find a soluti

  • Modify screen in VA41 : How to hide field in userexit_field_modification

    Hello, How to hide field at item level only (User should not be able to edit this field) in userexit_field_modification, instead of hiding the complete column. If I use FORM USEREXIT_FIELD_MODIFICATION. IF screen-name = 'RV45A-MABNR'. " Material SCRE

  • Getting Super Key to work as FN key.

    Hi. Recently I've bought port replicator II for my Thinkpad T40. When laptop is connected to replicator the lid is closed and I use additional keyboard. I was wondering, do You know how can I change the Super Key (the one with windows logo) to work a

  • CMOD get name of current query

    Hi, I have an authorization exit variable which need to be filled based on the processed query. Any idea how to get the query name/id in CMOD? Thanks a lot for your help!! Regards, Sven