Why is the Counter Not Showing on my Blog Front Page?
Anyone know why me blog is not showing on my blog's main page:
http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
I can see it in iWeb, but after publishing site, it does not show?
Any suggestions.
Thx Much
OT,
Thx Much.
Did all you suggested with the footer and still no counter visible:
http://web.me.com/quathletics/QuinnipiacMidnight_Madness_2009/2009_Quinnipiac_Midnight_Madness/2009_Quinnipiac_MidnightMadness.html
Had similar issues with another iWeb blog...something is not right with this and any help would be appreciated.
Similar Messages
-
Why did the trace NOT show the other switches in between?
I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?
It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
HTH,
John
*** Please rate all useful posts *** -
Why do the thumbnails not reflect changes I make to pages?
I am working on a pdf in Acrobat DC.
I am working on a page with all the layers hidden.
So the thumbnail is blank
When I show a layer it appears on the page.
The thumbnail however does not change.
Why do the thumbnails not reflect changes I make to pages?Hi Jules,
The behavior is same in Acrobat 11 as well. The thumbnails do not get refreshed till you close the document and reopen.
Regards,
Rave -
Why is the GUI not showing when i run it
Why is it not showing the container
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
public class Progress extends JFrame {
private String path;
private JPanel topLeftPanel;
private JPanel labelPanel;
private JTextField pathField;
public Progress()
this.setTitle("PROGRESS Message Viewer");
this.setSize(800, 600);
Container contentPane = this.getContentPane( );
// Technique for centering a frame on the screen.
Dimension frameSize = this.getSize();
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
this.setLocation((screenSize.width - frameSize.width)/2,
(screenSize.height - frameSize.height)/2);
topLeftPanel = new JPanel();
topLeftPanel.setLayout(new GridLayout(1, 2));
labelPanel = new JPanel();
labelPanel.setLayout(new GridLayout(4, 1));
JLabel l = new JLabel("Please enter the path to log file: ");
l.setForeground(Color.black);
labelPanel.add(l);
topLeftPanel.add(labelPanel);
pathField = new JTextField(80);
ActionListener aListener = new ActionListener() {
public void actionPerformed(ActionEvent e) {
// Retrieve the path.
char[] pathFieldText = pathField.getText().toCharArray();
path = new String(pathFieldText).trim();
pathField.addActionListener(aListener);
contentPane.add(topLeftPanel);
contentPane.add(pathField);
public static void main(String []args){
Progress p = new Progress();
}Swing related questions should be posted in the Swing forum.
Read the BoderLayout API documentation. If you don't specify a constraint then by default the component is added to the "CENTER". However only a single component can be displayed in any given area of the BorderLayout. So the second add(...) method replaces the first component added.
Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html]How to Use Layout Managers for more information. -
Why does the iTunes not show "Photos"
Why does the new iTunes not show "Photos" after it is synced, and why does iCloud not show Photos also?
Ralph9430 offers a good suggestion. But you may need to do this before taking his advice:
Check in iPhoto's Preferences (which you can open from the iPhoto menu). Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
If it is set to "iPhoto", you won't be able to get to Image Capture easily. -
I am trying to put a caption on a photo. Why does the caption not show in the photo?
In iPhoto, I would like to insert a CAPTION in the photo. When i enter my caption, it shows on the screen on top, but does not show in my slide show pictures.
Can you help?Adding a caption will add metadata tags to the photo, but not write the text as a graphics annotation overlay to the picture. The slideshow themes do not include the metadata tags. If you want to present the photos with captions, swipe them nanually and not as a slideshow.
You would need to find a different app to add graphic overlays to the photos for text written onto the photo. -
why is the airplay icon not appearing in the top bad like all the tutorial videos?
I assume that you did not check before buying, if you had you would have seen that your Mac is too old for Airplay Mirroring to work:
Supported Macs
AirPlay Mirroring in OS X Mountain Lion takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
And if you bought ML solely for that function you should remove it from your machine and get a refund. -
Why does the picture not show?
when I view with Safari
http://macdailynews.com/2013/06/18/see-how-apples-stunning-new-mac-pro-is-extrud ed-from-a-solid-aluminum-puck-with-video/
the pic of the Pro does not show
when I view with Chrome it does show
when I view with Firefox it does not show
what am I doing wrong?
thank youNot necessarily something you are doing wrong ...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any installed, turn that OFF, quit and relaunch Safari to test.
If it's not an extension issue, back to the menu bar click Safari > Reset Safari
Select the top 6 boxes then click Reset.
Quit and relaunch Safari.
If that didn't help, press Command + Option + E on your keyboard to empty the Safari cache and try that link again.
If that didn't help, try a different DNS.
Open System Preferences > Network > Advanced > DNS
Click + and type in these numbers:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click Ok.
Try Safari. -
Why do the Screensaver not show pictures from my Aperture Library?
Hello,
I have a new MacBook Retina and everything is fine, but the screensaver. When I choose a screensaver with photos (like Ken Burns) and an Aperture folder, the screensaver only shows "Fotos laden..." (German for "Loading pictures..."). When I choose the folder, I see all the pictures in the dialogue, but the saver itself don't shows them.
Using Aperture pictures for the desktop work by the way.
Any ideas? I already repaired (new database and stuff) the Aperture library, but it doen't helped.
One more hint: when I tried choosing an Aperture folder, the screensaver even don't work with the preinstalled pictures or normal picture folder on the HDD.
Thanks for helping me!
VolkerConnecting from one computer to another is one thing. The iTunes sharing feature is something completely different and is meant as a way for people to allow others to listen to their library from other computers on the same network that also run iTunes. It isn't meant as a direct connection from one iTunes library to another.
Think of it sort of like turning on the "Broadcast" or "Radio Station" feature of your iTunes to allow others to listen in on your library if they are interested. But you wouldn't want those people going in and making changes.
Patrick -
Why does the speedtest not show the all Speeds?
I keep being told that I am getting 8MPS downstream when I am not. It is always under 2 MPS. I have tested every socket with a wired connection to the Hub. Always the same result. Why doesn't the test show the speed from the Server to the Exchange, and the Exchange to the Hub as separate calculations? - and for normal traffic, not a magic ping that might bypass any throttling or capping. How can I lose 6MPS between my Hub and my PC? I simply don't believe the downstream stats are true, or are truly indicative of the bandwidth delivered to the hub. The service is nearly a month old, the "2 days" is from testing every possible fix suggested on the website.
Here are the Home Hub stats:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
2 days, 11:32:32
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
10.5 dB / 27.0 dB
Line attenuation (Down/Up):
10.3 dB / 5.5 dB
Output power (Down/Up):
15.9 dBm / 11.9 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
247 / 1
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
336 / 0
Error Seconds (Local/Remote):
228 / 1If it has not rest automatically ater your hub stats show 3days then use this link to the forum mods who can reset it manually for you http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
When I open a pages doc why does the text not show but the preview in Finder shows the text?
Doc shows a blank page but shows the number of pages at the bottom and flickers the text when I click on Outline icon.
In most cases it is because you have not updated Pages to the current version.
Peter -
Why is the text not showing up on the form fields?
I recently had Adobe Acrobat XI Pro installed on my computer. Sometimes I receive documents that have text missing from the fields. I do not have the option to "fix fields" under EDIT? One other person in my office has this option and the text will appear. We seem to have the same version so I'm not sure how to fix this? Any help would be appreciated. Thanks!
Many applications can be user modified and have additional tools or add ins add to the program. And example is the PDF Maker added to MS Office.
You will need to add the code to fix the fields and add a menu item option to call the function.
Script to Fix Mac OSX Preview.app Form Fill and Save
The code for adding the menu item is custom for the function name.
Does your co-worker know how or who installed the code and can you get them to add the code to your system? -
Why is the Hand not showing over button on one level?
I have site with multiple .swf files working on levels. many buttons working properly - but when I get to one level - the cursor is not changing to a hand over any of the buttons. I don't know how to trouble shoot that at all. I am using as2 Flash player 11.
When I test the site locally - I get the hand - when I test on the internet - I don't see the hand on this one level only. And - I tested on a mac with an earlier operating system - I did get the hand. What should I do?
thanks for your help ~ Judyif the button responds to a mouse click then there's nothing covering them.
the only way, i know, you can have a button respond to a click but not display the hand cursor on rollover AND have it be a flash issue is if useHandCursor was assigned to false.
however, there are browser issues that can cause this problem and you may be able to prevent them by making sure your embedding html has wmode="window" (or, just about anything other than "transparent"). -
Why is the CME not showing pls
The phones are all ringing one another with the router 2620XM but am unable to open the CME when l typed http://172.168.1.1/cme.html on the internet explorer (error message is) 404 not found. Can so one pls help me thanks
Router#sh run
Building configuration...
Current configuration : 1777 bytes
! Last configuration change at 10:23:50 UTC Mon Oct 3 2011
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 172.168.1.1 172.168.1.10
ip dhcp pool VOICE
network 172.168.1.0 255.255.255.0
default-router 172.168.1.1
option 150 ip 172.168.1.1
lease 5
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 20.20.20.1 255.255.255.0
interface FastEthernet0/0.5
encapsulation dot1Q 5
ip address 172.168.1.1 255.255.255.0
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 162.168.1.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
telephony-service
load 7960-7940 P0030702T023
max-ephones 4
max-dn 5
ip source-address 172.168.1.1 port 2000
max-conferences 4 gain -6
web admin system name ojay password cisco1
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Oct 03 2011 09:31:24
ephone-dn 1 dual-line
number 1000
ephone-dn 2 dual-line
number 1001
ephone 1
device-security-mode none
mac-address 0006.5356.AC92
button 1:1
ephone 2
device-security-mode none
mac-address 0014.6A87.8E91
button 1
End
System flash directory:
File Length Name/status
1 32062316 c2600-adventerprisek9-mz.124-9.t2.bin
2 4668 admin_user.html
3 667582 admin_user.js
4 1602 CiscoLogo.gif
5 639 CME_GUI_README.TXT
6 331483 CP7902080001SCCP051117A.sbin
7 338840 CP7905080001SCCP051117A.sbin
8 338424 CP7905080001SCCP051117A.zup
9 340631 CP7912080001SCCP051117A.sbin
10 953 Delete.gif
11 497 DistinctiveRingList.xml
12 16948 dom.js
13 864 downarrow.gif
14 6315 ephone_admin.html
15 4658 logohome.gif
16 3831 normal_user.html
17 81600 normal_user.js
18 129476 P0030702T023.bin
19 459 P0030702T023.loads
20 685334 P0030702T023.sb2
21 129880 P0030702T023.sbn
22 349794 P00405000700.bin
23 350198 P00405000700.sbn
24 1347 Plus.gif
25 4000 Ring1.raw
26 4000 Ring2.raw
27 4000 Ring3.raw
28 4000 Ring4.raw
29 4000 Ring5.raw
30 497 RingList.xml
31 843 sxiconad.gif
32 843 Tab.gif
33 2451 telephony_service.html
34 870 uparrow.gif
35 3493 xml.template
36 10230 xml-test.html
[35894376 bytes used, 14437268 available, 50331644 total]
49152K bytes of processor board System flash (Read/Write)
when l typed http://172.168.1.1/cme.html on the internet explorer
error message is 404 not foundThere are several problems here:
The URl is http://172.168.1.1/ccme.html not cme.html
You do not have the GUI HTML files loaded to flash. I suggest you download these from CCO; they are version-specific to the IOS you are running so be sure they match.
The CME Admin Guide has a chapter on Enabling the GUI. It is a good place to check that you've covered all your bases.
Please rate helpful replies. -
Why does the calendar not show dots since the IOS 6 upgrade
Since I upgraded to IOS 6 the dots don't appear on the calendar when looking at the monthly view. Is there a setting for this that needs changing?
Thanks,the "start new conversations from" section in back but it still won't allow my to send texts. relevent problem discussed in this thread. +1 (1) (216)116-11 error invalid number
Maybe you are looking for
-
Error while retriving the values from a vector in jsp
Vector AppDetails is set in a Attribute of request scope as. Vector[] AppDetails = (Vector[])port.retrieveAppDetails(appID); request.setAttribute("AppDetails",AppDetails); But while retriving the same in the jsp by Vector AppDetails =(Vector)request.
-
My ical won't sync with iPhone 4 after IOS 6.0.1 update
My ical won't sync with iPhone 4 after IOS 6.0.1 update. The "sync calendars" option is no longer available after I installed this update. Any ideas???I have tried a few times to sync, and nothing has changed on my calendars. I have had so many troub
-
Hi Friends, While selling trading goods, the requirement type is coming as 011 in sales order.And schedule line as CP. But if I want to requirement type as 011 and schedule line as CN. Kindlty guide me Thanks in advance Shailesh
-
Rescue and Recovery "File is in use and can't be copied" errors - T61 - WXP
Hi and thanks - When Rescue and recovery backs up, I frequently get the error message, "This file is in use and can't be backed up. Close all programs and try again" [my paraphrase]. Here is everything I have tried: Restarting Windows and backing
-
Where can I find the iPod application for the iPhone?
My son (3yrs) just deleted the iPod application to watch videos and to listen to music on my iPhone 3Gs. Where can I find the download to reinstall this vital application? The fact that the application is called iPod and there are millions of hits fo