WHy is the cursor jumping to wrong position (mainly back to position 1 in the text field) as I try to post comments to peoples posts on Facebook?

I love FIrefox browser and prefer to use it on all my devices, PC, Smart Tv, Phone, Tablet etc. In recent times Iv'e had problems though, everytime I try to comment on a facebook post with each key stroke the cursor jumps back to the beginning of the text field and by the time I finish typing I look up and find jibberish, yesterday I upgraded this RKM Mk902 Android device that I am typing on now unfortunately using Chrome from Anroid 4.2.2 to android 4.4.2 Kit-Kat and thought I would no longer have that problem but the issue is still there. I also have discovered I'm having similar problems with FireFox on my Cube U39GT tablet. As I spend more time on Facebook than any other website I have to find a solution. I thought it may of been one of the addons that i use causing the problems such as Phony but I still get the issue without the addons and after a clean install. Please help me sort out this problem so I can once more use FireFox on my Android devices.

I found this, it seems that there are a few issues in Android as well with the wrong placement for the cursor when you type: [https://github.com/RobinHerbots/jquery.inputmask/issues/465] but since it is only happening in facebook, this is odd.
What this means is that they are working on fixing specific issues like this and I am not sure when this will be fixed.
Does this happen with both keyboards that are offered in the Android Settings?

Similar Messages

Satellite P300: cursor jumps to different positions while typing

Hi All,
i have a Satellite P300,
I am having trouble when i type.
When i am typing using the keyboard, the first couple of words are ok, but then the words start typing in the wrong place, eg back further into the middle of the sentence i am typing.
Anybody please help? thanks

Hi dude
I had a similar issue.
While typing the cursor jumped to different positions and I was not able to finish one sentence.
I though there could be something wrong with the keyboard but finally I have notices that I have touched the touchpad surface accidentally while typing ?.
I have disabled the touchpad using the Fn+F9 and the issues has gone
So maybe its the same reason for you

Why is the text not the visible in the protected PDF opened on Mac?

Long story short:
I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
Why is the text not visible in the protected PDF opened on Mac?
(is this bug or a "feature"?)
Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
Thanks!

A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
C. Have you checked the file after adding security to see if all fonts are embedded?

Why is the text in the resume template invisible?

using macbookpr laptop and iWork '08 pages professional resume template with a pic, why is the text invisible? I can't get the font to be black....when I preview in print , everything looks normal

Which version of Pages 08 do you have? The latest is 3.0.3. If you don't have it you cna get it from here Pages 08 3.0.3
Have you tried oter templates? Do they have the same prblem?

Why is the text going over the image????

Please refer to video here http://www.youtube.com/watch?v=2rN6Ndm9sFo&feature=youtu.b
Why is the text going over the image when the text layer is below the image layer?? It is so frustrating.

Are you sending the texts to his phone number or his Apple ID? It might be that the texts originated from your phone is to his Apple ID and not his phone number and his Apple ID was not registered for the Message app on his phone. So any texts to his Apple ID is not received by his phone.
Can you receive his texts? If yes, then reply back from what he send you and see if he can receive the texts.

Why is the text garbled when I convert a pdf file to microsoft word ?

Why is the text garbled when I convert a pdf file to microsoft word ?

Hi amedah,
Could you please try converting any other PDF file with same fonts and then check.
It might also happen due to use of some poor fonts which result in garbled text.
Is the PDF scanned?
Let me know.
Regards,
Anubha

Why is the text greyed out and small on my Macbook air

why is the text greyed out and small on my MacBook Air it started after update to Yosemite

have the same issue

Why is the text bubble to the same person with another iPhone sometimes green and sometimes blue?

Why is the text bubble sometimes green and sometimes blue when I text to the same person/number who has an iPhone 4s?

Ebe68 wrote:
the colors indicate if the message receiver has a iphone or not. Blue for iphone, green for other.
Not necessarily an iPhone but rather if they have iMessage support at the address you're using.
If you're using an email address they could have an iOS device or a Mac.

Why is the text so small in the log in screen?

I am visually-impaired. Why is the text so small in the log in screen?

You can try to set the display resolution to something like 1024x768 (from the "Best for display") in the "Displays" System Preferences - this will "enlarge" things on the login screen as well as after, (the trick about using the Option key to zoom does not work on the login screen), and then after logging in, reset the Display resolution back to "Best for display".
To use the "Option" key for zooming -- set in the "Accessibility" System Preference Zoom options "Use scroll gesture with modifier keys to zoom" to Option.
Not sure, but you might also be able to affect this by changing the default system font. If the above doesn't help, say so and will do a bit more research to see how to change this and see if it also applies to the login screen
Good luck...

Why is the search field so small?

This may not be a big issue, but I just wonder why is the search field on iTunes for Windows so extremely small that you can barely type the name of the artist and if the song or album is too long, it starts scrolling. There's an awful lot of space to the left of it, why not make that search field set as auto width so it goes almost all the way to the right edge of the middle display?

Many applications do a "fast save". This includes Acrobat and Word for example. The quick save writes new stuff to the end of the file, making the file larger every time even if you delete things. Some apps use "Save as" to go through and do a slower save of only the things still used. I don;t actually know if InDesign works this way but it's quite likely. Fast save also has the advantage that it's much less likely to corrupt the file you are overwriting.

Change the position of the text field in the report region

Hi,
I am having a report region in whch there are 2 buttons which are in the Region Template position #Create# and a
text field. I added a text field in the same region. I tried to change the position of the text field near the buttons. I
tried to change "label-Horizontal/vertical alignment" and "Element horizontal vertical alignment". But the postion of the
text field is not changing. Plz help,
Thanks,
TJ

Hi Andy,
Sorry to ask this questions.
1.Where exactly i need to change the HTML code(By uisng the view source?)
2.My taskname part html code when viewing the source is given below
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" />
</a><tr></td><td nowrap align="left">
<label for="P1_TASK_NAME" tabindex="999">
<a class="t16OptionalLabelwithHelp" href="javascript:popupFieldHelp('5853137628393530415','676839962625525')"
tabindex="999">Task Name</a></label></td>
<td colspan="1" rowspan="1" align="left" valign="top"><input type="hidden" name="p_arg_names"
value="5853137628393530415" /><input type="text" name="p_t06" size="10" maxlength="20" value=""
id="P1_TASK_NAME" /><a class="eLink" title="Edit" href="javascript:popupURL('f?
p=4000:371:676839962625525::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:5853137628393530415,107,1');"
tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></table>
<table summary="" cellspacing="0" cellpadding="0" border="0" width="100%"><tr><td align="right"><table
cellpadding="0" cellspacing="0" border="0" summary="" class="t16Button">please suggest what changes i need in this code to change the alignment of the task_name text field,
Thanks,
TJ

The dropdown menu in the banner should be behind the text fields.

Hi Andy,
In our Application we have three Menus...The problem we are facing in that when ever we move the cursor, a drop down list will appear.. which is covering the text fields...
The dropdown menu in the banner should be behind the text fields.
Can u pls help me in this...
anoo..

Hi Anoo,
(You can actually ask questions to everyone, not just me!)
Normally, dropdown menus are supposed to be on top of all other items, so the user can pick an option from the menu. In fact, usually the problem is that select lists in IE appear on top of menus, not the other way around!
What you may have to look in to is adding a z-index value to items. Have a look at: http://msdn.microsoft.com/en-us/library/ms531188(VS.85).aspx
z-indexes determine the order in which items appear when two or more occupy the same space on the page. The higher the number the nearer to the top that item is. You can use negative or positive numbers. So, if item A has a z-index of 1 and item B has a z-index of 2, then item B will appear on top of item A.
A z-index can be set as a style on your menus:
<........ style="z-index:-1".....>Andy

Print just what is typed in the text field without printing the text fields

Hello,
I'm trying to print a form after I filled in the text fields, but would like it to print just what I typed in the field, not the text field and the color in the text field. I use CS3.
Any help would be appreciated!

Hello Teddy and wellcome to the group!
If you want to change fonts or other things then you might need to use the PrePrint method. What I normally do is select PrePrint from the "Show" section in the Script Editor (If you do not have it go to the toolbar at the top, Windows, and select Script Editor). After you select PrePrint you can now either type the name of the subform and field you want to change (or you can put your cursor in the Scripting Dialog box, hold CTRL and then select the field with your mouse) and then type in the JS to change the font. it is something like TextField1.fillcolor = "255, 255, 255"; (that changes the background fill to white). You can also replace fillcolor with font or border to change the color of the font or the border. I put a link to an Adobe website that goes over JS color changes below. You just need to add a PrePrint method for each field that you wish to remove the necessary highlighting on. Then once the user either hits a Print button that you have on the form or uses CTRL+P to print the form it will remove any highlighting.
Now On the Text Field not printing itself that I am not sure what you are asking for. Are you asking for the caption not to print or for there not to be a box around the data that is entered? If you do not want to have a box surround the text field that is in the Object section of the field (see image below). You just need to select None if you just want the text. If you want to change that with JS I put another link below that has the code to change the border color to white and the user cannot see it. If you do not want the caption to print the only method is to delete the caption from the text field and replace it with static text that can be hidden, but I am assuming that is not what you are talking about (correct me if I am wrong though).
http://partners.adobe.com/public/developer/en/livecycle/designer/pdfs/ChangingFieldAndSubf ormBGColors.pdf
https://forums.adobe.com/thread/1409617

How to change the color of the text field of form

Hi ,
Is there any way to change the color of the text field of the form........
Thnx in advance .......
Cheers,
Eman

Hi Bob. I'm new to these forums and I'm not sure of protocol and exactly how this is supposed to work, so If I'm doing this wrong then please excuse me and let me know.
I liked you solution on 'How to change the color of an Item on a form' using <blink>.
I'm new to this application and coding as well so its kind of foreign to me.
Working on a Report Page,
I would like to have item, :P1_JOB_NO blink when the difference between sysdate and :P1_DATE_DUE < 7 days.
I can identify the job_no which should blink by using the sql statement:
SQL> select job_no from oax_projects07 where
2 (sysdate - date_due < 7) and
3 emp_name = 'GARY PILKENTON';
JOB_NO
20060627 050
But I dont know the proper syntax to make it blink,
or when to plug the syntax into.
ie, is it a process, a validation, etc.
Do you have any advice for me?

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

WHy is the cursor jumping to wrong position (mainly back to position 1 in the text field) as I try to post comments to peoples posts on Facebook?

Similar Messages

Maybe you are looking for