Why is the display going black when editing in FCP X?

Here's a tough one that the Genius Bar couldn't make heads or tails of:
I'm using FCP X to edit some videos, as I have for a few years now. Upon launching Final Cut Pro it loads my timelines etc as it always does, but sometime soon after (either while waiting for background tasks to run, or when click on an event) the screen goes black. I've replicated the same problem with multiple external drives, projects, etc.
And yes, I have uninstalled and reinstalled FCP X following the specific instructions on the Apple.com website. No such luck. Taking it to the Apple Store resulted in a lot of head scratching, confirmation that something is definitely wrong, and a then this Support Forum question.
Anybody heard of something as bizarre as this? I'm hoping so. Thanks.
My Gear:
MacBook Pro w Retina Display
OS X Mavericks 10.9.2
Final Cut Pro X 10.1.1
multiple external drives (Lacie, WD, etc)

What do you mean by saying the screen is going black?
Do you mean the whole monitor or just the Viewer in FCP X?
Try these general troubleshooting strategies even if you've already done them.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.

Similar Messages

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Why is the photo only black in Edit mode with iPhoto 11?

Why is the photo only Black in Edit mode?
Everything works fine, except when I try to edit a photo, it shows as only Black.
I have tried every fix talked about on this forum, and some others - nothing fixes it.
Is this a Feature ? or is it a bug that no one is interesteed in fixing? It doesn't fill me with confidence in Apple when I see such random little glitches remaining unfixed.

Is it the same for newly created slideshows? Although a long shot give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the above fails as a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it doesn't then the following my be your next step:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Photo goes black when editing it

Hi,
I acknowledge this is a fairly common matter, but let me try to share my on experience.
For the past few days, I have been importing photos in my iPhoto library either from .jpg docs or brand new ones from my digital camera.
Each time I try to edit one of those, the image goes black. Surprisingly, if I try to crop a picture, the image comes back to view !?
I have unsuccessfully tried to:
- repair iPhoto library permissions
- reconstruct library
using the Cmd+alt keys when lauching iPhoto.
I have NEVER experienced such a painful behaviour in the past, as I have to go back and forth between the editing and normal modes to see the results of my editing.
Any educated advice would be appreciated.
Mac mini Core 2 Duo - 2 Go RAM - OS X 10.7.5 - iPhoto 9.4.1

The fact that you can edit those photos and get them to display correctly via a new, modified file indicates that the originals are damaged somehow.
Select one of the thumbnails and use the File ➙ Reveal in Finder ➙ Original menu option to take you to the original file located inside the library. Copy the file to the desktop and try the following:
1 - download Convert to JPG and Embed sRGB profile from Toad's Cellar and unzip it.
2 - drag the file from the desktop onto the application.
3 - import the converted files into iPhoto and see if it appears as it should.
If the above works you could run it on each file in the library. Unfortunately you would have to open each subfolder in the Masters folder and drag the files onto the application. That will be a lot of manual work.

Why is the assests panel disabled when editing css or xml files?

It's immensely annoying. Is there anyway to stop it?

That doesn't really explain why a very useful panel is disabled. What's the logic behind it?
This is a user-to-user forum, not Adobe customer support. You asked whether there was any way to prevent the Assets panel from being disabled when editing CSS and XML files. The answer is no.
If you want Adobe to change the way the program works, file a feature request.

MacBook Pro 15' Core i7 Running Boot Camp Turns on in OSX fine, but in windows, whenever plug it in, the display goes black.

I have a 2011 MBP 15'. It has a core i7 2.4GHz 8gb of ram, and a HD 6750m. I rarely use Lion, I use Windows 7 Enterprise. I boot up my laptop and it turns on fine. Windows loads, but as soon as I plug the MagSafe adapter into the laptop, the display turns off.
Any ideas? I have already reset the SMC, and reset the PRAM and NVRAM. Neither worked.

Since you have a Mid2014 MBP, the USB should contain the Windows installer and BC drivers. Make sure your USB is a USB2 flash drive/disk. USB3 will fail.
There should be no hubs between the USB and the MBP and no other external peripherals connected to the Mac.
However at the last step when I click the "Install" button, my computer will restart and boot into OSX.
This indicates that the Mac cannot find the USB with Windows ISO and BC drivers.

The display goes black intermittently, Processing seems to stop at the same time, It picks up where it went blank.

The display on my older imac goes blank intermittently. It seems that the computer also freezes temporarily, usueall for a second or two, then comes right back where it left off. There doesn't seem to be any predictable timing to the events. They occur a few times daily. Help! the computer is no longer under warrantee. Any ideas on how to troubleshoort this. I'm not sure that it is a display issue althought that is what i see. The freezing of the computer during the blackouts might indicate a power supply issue.
Thanks

The display on my older imac goes blank intermittently. It seems that the computer also freezes temporarily, usueall for a second or two, then comes right back where it left off. There doesn't seem to be any predictable timing to the events. They occur a few times daily. Help! the computer is no longer under warrantee. Any ideas on how to troubleshoort this. I'm not sure that it is a display issue althought that is what i see. The freezing of the computer during the blackouts might indicate a power supply issue.
Thanks

Why does the display on my 27" iMac keep going black?

This seems to be happening very often now. It started with just every once in a while.
I will be using my iMac and the display goes black. It does NOT go to sleep. Just the display goes black. I do video and audio editing on my iMac and if I am listening to playback or a song while the screen goes black, I can still hear it. So, I know it has not gone to sleep.
A way that I have gotten around this is by, once the display goes black I will then push the power button to make the iMac go to sleep. Then, I will push it again to wake it up. This usually works and the iMac will work just fine afterwards. Now what is happening, the iMac will go black again after a few seconds of being turned back on from sleep.
I tried to run a diagnostic with an Apple person over the phone and for some reason my iMac will not respond to this.
AND... It has gotten worse. I can't even boot up my iMac from a power down without the display going black.
Any help?

ATI Radeon HD 5750:
Chipset Mo
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x68a1
Revision ID: 0x0000
ROM Revision: 113-B9710C-238
EFI Driver Version: 01.00.417
Displays:
iMac:
Display Type: LCD
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes

Apple TV stops streaming via AirPlay when iPhone 6 Display goes black

Hi,
when my iPhone gets locked and the Display goes black (standby) after 2 Minutes, my AirPlay stream to my Apple TV 3. Gen stops playing. Only when i set the standby/lock time time to never instead of 2 Minutes (and the screen is on all the time) the Stream wont stop.
Sometimes the stream does not stop, wenn my iPhone Screen goes black.
This also happens with an iPad Mini or using an Lightning to HDMI Adapter instead the Apple TV.
I have no idea why.
Please help.
Best regards
Sebastian

On a sidenote, I also have an ipad and normally homesharing with the ipad works fine, but after having an apple tv incident, I have to restart the mac for homesharing to work with the ipad

Cinema display goes black upon resolution change in Windows XP

Greetings
Earlier today, I updated my ATI X1600 Radeon to the latest Windows Catalyst drivers and to the Catalyst Control Center from ATI. Even since, whenever a Windows application (games, in this case) tries to change the resolution on my external Apple Cinema Display (designated as the main monitor in the ATI Catalyst Control Center, with the MacBook Pro display disabled), the display goes black, and the monitor power lamp starts to flash.
If I unplug the external Cinema Display from my MacBook Pro, my MacBook Pro display activates, and displays whatever it is I was trying to launch, so the problems is somehow related to the Cinema Display, even if the new drivers are causing it.
This happens regardless of my Catalyst Control Center settings, such as scaling the lower resolution to fit the screen, or keeping it the original size, with black borders around. The problem does not occur when I launch games using 1600 x 1024, the Cinema Display's native resolution.
Any ideas what might be causing it, and how to resolve it?

Update on my situation: when I tried to change the resolution manually in Windows, I encountered the same problem. Now, whenever I connect the Cinema Display to my MacBook Pro, the same thing occurs: the screen goes black, and the power lamp starts flashing, even though I've changed back to 1600 x 1024.

Display goes black randomly

I purchased the notebook barely 16 days ago, and after a few days I noticed that the display goes black for a second or two randomly i.e it doesn't happen while holding the notebook in any certain way or something. The dislay goes black anywhere while playing games, music, videos or simply anytime. Also now there's some flickering in the lower part of the display. It happens with no approx time gap. I asked HP's Chat Support to help me out of this, they tried to uninstall and have a clean install of display drivers, that didnt work.Then they said they'll assign the nearest Physical service centre for an onsite visit and that some one will contact me, but waiting since almost 4-5 days this didnt happen. For the past two days I regularly ask HP's Support team about the promised visit but they keep on saying that today you'll recieve a call positively. The problem has escalated to such an extent that it interferes with my studies, work and daily use. This all has cost me alot of time and money and it's all due to your faulty product and carelessness. I would like you to help me in this regard, asap, if it is at all possible for you !! Edit : Before you ask, everything's updated to it's latest version. and I don't have an external Monitor.

Satellite L655D-S5066 Specifications
Satellite L655D-S5066 Downloads
Assuming you're still running Windows 7 64bit, download this file to your desktop and double click to install it
AMD Chipset & Display Driver Package
Please let us know if this helps. Good luck.
Mike

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Why is the display going black when editing in FCP X?

Similar Messages

Maybe you are looking for