Why is the extracting process taking so long on the download?
Why is the extracting part of the download taking forever I have had it running for two days nearly and it doesn'nt seem to be making any difference, I havent saved it to any other file just default as I have read on other parts of the forum that this is a problems can you help?
You are correct that this is likely happening due to the Adobe Download Assistant not having permission to save the download to the location specified.
You can either cancel the download again and try the default location of your user folder or try the steps listed in http://forums.adobe.com/thread/981369 to initiate a direct download.
Similar Messages
-
How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements.
How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements). I have already received Disk Image Error - 4960. System will not let me attempt another download as message that download is in queue is received??
Cancel it, try this:
Direct Download Links for Adobe Software
Use Winzip to extract the 7z file.
Mylenium -
since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.
I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.) -
Downloaded Mountain Lion on my iMac. Why is it so slow opening up from sleep and taking so long for the wireless mouse to engage?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Background process taking very long time to complete.
Dear All,
Platform: HP UX
Version: 12.0.6
While time of shutting down the instance below background process taking very long time to complete.
what is below mention process? can i kill it? total 3 process i am getting while finding ps -ef|grep applpre(applepre is apps instance's owner)
applpre/apps/tech_st/10.1.3/appsutil/jdk/bin/IA64N/java -DCLIENT_PROCESSID=5457 -server -Xmx384m -XX:+UseSerialGC -Dor
Thanks in Advance,
Sandeep.Sandeep,
Please see (Note: 567551.1 - Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12).
You can safely kill those processes from the OS.
Thanks,
Hussein -
Why is this new update taking sooooo long?
why is iPhone 4s update taking so long?
MKRR wrote:
why is iPhone 4s update taking so long?
Because all those people who said "I'll cleverly wait until the day after the initial release to download" are all piling on today.
Seriously, the server loads will likely taper off by the weekend, if you want to wait. -
OGG-00868 SQL Server 2008 has problem with ODBC in the EXTRACT process
Hello Everyone
I want to replicate tables between MS SQLServer 2008 and Oracle 10g
I have Windows XP / MS SQLServer 2008 and Oracle Database 10g R 10.2.0.1.0 running on Red Hat Linux
I followed the steps from the white paper (http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html)
and Installed Oracle Golden Gate Version 11.2.1.0.1 (for Linux) and the Version 11.2.1.0.1 32bits (for Windows XP)
I followed all steps of the white paper without problem and I could do the initial load in
the Oracle Database from SQL Server sucessfully.
But when I tried to set and start the Extract process from SQL SERVER
a error was generated in the file c:\gg\dirrpt\MSEXT.rpt and the process is ABENDING
GGSCI > info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED MSEXT 00:00:00 03:22:29
2013-08-25 11:59:41 ERROR OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messag).
2013-08-25 11:59:41 ERROR OGG-01668 PROCESS ABENDING.
If somebody has a clue or faced something similar please let me how could solve it.
Thanks
JuanHello mb_ogg,
Yes, I had created a Data Source HR Driver= SQL Server (second Tab System DSN) and I also had tried with
the driver SQL Server Native Client 10.0 but I faced the same error.
The database by default is EMP
Below is my configuration
Microsoft SQL Server ODBC Driver Version 03.85.1117
Data Source Name: HR
Data Source Description:
Server: JUAN-XP
Database: EMP
Language: (Default)
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Integrated Security: Yes
Use Regional Settings: No
Prepared Statements Option: Drop temporary procedures on disconnect
Use Failover Server: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
Data Encryption: No
I also clicked on the button "Test Data Source" with the below messages:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Then I went to Database Properties (Right Click) /Oprtion and Recovery model field has Full value
I also made a Backup (Backup Type = Full)
The Backups was made to Disk: C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Backup\EMP.bak
Today I repeated the same steps and I got the same error (I Copied at the end):
I also have the follow question:
Is necessary define the location of the backup of MS SQL Server to say to GG where it can get it?
GSCI (juan-xp) 1> DBLOGIN SOURCEDB HR
2013-08-27 21:16:32 INFO OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:16:32 INFO OGG-03037 Session character set identified as wind
ows-1252.
Successfully logged into database.
GGSCI (juan-xp) 3> ADD TRANDATA HRSCHEMA.EMP
Logging of supplemental log data is enabled for table hrschema.emp
GGSCI (juan-xp) 4> EDIT PARAMS DEFGEN
GGSCI (juan-xp) 5> exit
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
Oracle GoldenGate Table Definition Generator for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:18:23
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3236
** Running with the following parameters **
defsfile c:\gg\dirdef\emp.def
Source Context :
SourceModule : [defgen.main]
SourceID : [defgen/defgen.c]
SourceFunction : [create_defgen_file]
SourceLine : [808]
2013-08-27 21:18:23 ERROR OGG-00037 DEFSFILE file c:\gg\dirdef\emp.def alrea
dy exists.
2013-08-27 21:18:23 ERROR OGG-01668 PROCESS ABENDING.
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
Oracle GoldenGate Table Definition Generator for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:19:03
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3312
** Running with the following parameters **
defsfile c:\gg\dirdef\emp.def
sourcedb hr
2013-08-27 21:19:05 INFO OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:19:05 INFO OGG-03037 Session character set identified as wind
ows-1252.
table hrschema.emp;
Retrieving definition for hrschema.emp
Definitions generated for 1 table in c:\gg\dirdef\emp.def
C:\gg>ggsci
Oracle GoldenGate Command Interpreter for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 02:57:42
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (juan-xp) 1> start manager
MGR is already running.
GGSCI (juan-xp) 2> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
GGSCI (juan-xp) 3> ADD EXTRACT MSEXT, TRANLOG, BEGIN NOW
EXTRACT added.
GGSCI (juan-xp) 4> ADD RMTTRAIL /u01/app/oracle/gg/dirdat/ms, EXTRACT MSEXT
RMTTRAIL added.
GGSCI (juan-xp) 5> EDIT MSEXT
ERROR: Invalid command.
GGSCI (juan-xp) 6> edit params msext
GGSCI (juan-xp) 7> START EXTRACT MSEXT
Sending START request to MANAGER ('GGSMGR') ...
EXTRACT MSEXT starting
GGSCI (juan-xp) 8> show all
Parameter settings:
SET SUBDIRS ON
SET DEBUG OFF
Current directory: C:\gg
Using subdirectories for all process files
Editor: notepad
Reports (.rpt) C:\gg\dirrpt
Parameters (.prm) C:\gg\dirprm
Replicat Checkpoints (.cpr) C:\gg\dirchk
Extract Checkpoints (.cpe) C:\gg\dirchk
Process Status (.pcs) C:\gg\dirpcs
SQL Scripts (.sql) C:\gg\dirsql
Database Definitions (.def) C:\gg\dirdef
GGSCI (juan-xp) 9> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED MSEXT 00:00:00 00:02:34
GGSCI (juan-xp) 10> EDIT MSEXT
Report MSEXT.rpt with same error
Oracle GoldenGate Capture for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:49:54
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:30:26
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 2452
Description:
** Running with the following parameters **
2013-08-27 21:30:26 INFO OGG-03035 Operating system character set identified as windows-1252. Locale: en_US, LC_ALL:.
EXTRACT MSEXT
SOURCEDB HR
2013-08-27 21:30:28 INFO OGG-03036 Database character set identified as windows-1252. Locale: en_US.
2013-08-27 21:30:28 INFO OGG-03037 Session character set identified as windows-1252.
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
RMTHOST OCM, MGRPORT 7809
RMTTRAIL /u01/app/oracle/gg/dirdat/ms
TABLE HRSCHEMA.EMP;
2013-08-27 21:30:28 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: MapViewOfFile anon free: UnmapViewOfFile
file alloc: MapViewOfFile file free: UnmapViewOfFile
target directories:
C:\gg\dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 1G
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.57G
CACHESIZEMAX (strict force to disk): 1.41G
Database Version:
Microsoft SQL Server
Version 10.00.1442
ODBC Version 03.52.0000
Driver Information:
SQLSRV32.DLL
Version 03.85.1117
ODBC Version 03.52
Source Context :
SourceModule : [ggvam.param]
SourceID : [../gglib/ggvam/cvamparams.cpp]
SourceFunction : [com_goldengate_vam::validateIfSqlServer]
SourceLine : [1955]
2013-08-27 21:30:28 ERROR OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system admi).
2013-08-27 21:30:28 ERROR OGG-01668 PROCESS ABENDING.
Thanks
Juan -
MGP Tuning: MGP Processing taking too long
Hi All,
I have question here related to MGP Processing. MGP Processing is taking too long for us, close to 900 secs. Is there a way to tune and optimize this MGP Process. Right now we have only 3 users syncing and this kind of delay in Sync for users in testing Envt is not acceptable to the client. Is there a way to tune this MGP Process. I am aware of the Consperf process. Should I be running the Consperf for all the publication items to optimize their Sync process or should it be only for those publication items that are taking too long in the Compose/Apply process.
Thanks in advance for all suggestions.Hi Rekounas,
what would be your recommendation for some 70 snapshots and 50 users? And is there any recommendation for mobile server? We have the mobile server on dedicated machine, which is quite old piece of HW. I presume that it should have just some amount of RAM available for caching of MGP data and that it shouldn't be CPU-power consuming much - is that right? At the monent the compose phase of MGP takes some 25-30 seconds per user when there's some new data to process... -
Why is my macbook air taking so long to boot up
Why is my macbook air taking so long to boot up?
I have added an Airporter and the boot up time remains slow.
Model Name: M
Model Identifier: MacBookAir4,2
Processor Name: Intel Core i5
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBA41.0077.B11
SMC Version (system): 1.73f66Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Set the default startup disk.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Reset the printing system. -
HT2404 why is os X update taking so long I tried to download it and would not finish.
why is os X update taking so long I tried to download it and would not finish downloading..
It's been a few days since the original post. If you use Software Update again now, do you still have this problem?
Also, what is the name and version number of the update? If you can't get Software Update to do it for some reason, you can search for that update on Apple Support, then download and install it manually.
Before you do that, run Disk Utility (which is on Applications/Utilities). Select "Macintosh HD" in the sidebar and go to the First Aid tab. Click Verify Disk. This will check to make sure there is nothing is wrong with your startup disk. If there is a problem reported, that may be causing the problem with Software Update. -
Why is iOS 8.1 taking so long to load ?
Why is iOS 8.1 taking so long to load ? I've been trying to load it since last night at 9:00pm ! Here I'm at 9:59 am, the next Morning and it's still telling me 5 more hours to go ! SeaWollf
10.7 Lion / 10.8 Mountain Lion
Start up in safe mode
http://support.apple.com/kb/PH11212
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836 -
Guidelines required to analyze the extraction process for 2LIS_02_SCL.
Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy -
How to analyze the extraction process for 2LIS_02_SCL both in R/3 & BW.
Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy -
I need urgent support because Adobe CC crashes after the "extracting " process of an app. So if i choose to download an application ( Muse, Photoshop etc ) it downloads, and after that it crashes, is there any support available ?
Thanks,Problem solved, it is the firewall who blocked the installation, everything works fine now!
-
I'm running Lion on a Late 2008 MacBook Air.
With no other applications running, I can no longer Check for Software Updates. It gets about half way through the checking process and then freezes.
The MBA passes Disk Utility. Thoughts?
Thanks
Jim TaylorHow long do you leave it?
Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
charlie
Maybe you are looking for
-
How many ipads can i sync to one iMac?
I am a teacher and our ESL team is considering getting 4-5 iPads for our students and we are wondering how many iPads can we sync to one iMac? I thought it could be potentially much easlier to sync all 5 iPads to one iMac and use this one iMac and i
-
Hi guys, I have a problem, I have a new macbook pro. I updated the software without problems; then I tried to update iPhoto, iMovie and Garageband, but an error was displayed "You have updates available for other accounts". I don't have any other acc
-
Search Results in Reader won't display attachments
The same search I do in Pro v9 successfully when done in Reader v8 the search results does not display the attached .xls file only the instances that the text appears in the pdf. Advanced options to include attachment in search was selected. See imag
-
Won't receive Confirmation Email for iStore
Today i bought the super cool iPod Touch, and ofcours i registered a new account for the iStore. But when i want to download and install a free application, it says i did not verify my account! So i checked my email and guess what? No verification em
-
I'm trying to watch a webinar that is using flash. Is there a way to watch this webinar on my iPad 2?