Why is the flip horizontal or vertical moving the frame or image?

(CS6) Why is the flip horizontal/vertical moving the frame or image instead of just flipping it in the current frame position? CS5 did not do this.

It flips around the point you've picked in the Transform Proxy in the upper left of the Control panel (and has always done so). Click the center point and you'll get what you want.

Similar Messages

Why does the frame of my rotated video not rotate also?

I've checked these forums and followed the method to rotate a video that turned out to be rotated 90 degrees. When I rotated the video it rotated all right but the frame is still vertical portrait format and did not rotate also. What I wind up with is a tall vertical frame that has a properly rotated video that has both ends cropped off. Any other videos I now add to the timeline are also inside of this tall frame and also cropped off because the frame is tall and narrow, not rotated with the image.
How do I go about doing this correctly? Is it possible to just rotate a video that has turned on its side and have the format or frame rotate also?
TIA, Ken

It never ceases to amaze me the odd hours that the loyal Adobe staff puts in. Look at the time stamp on Mark's post.
To be more specific, just in case other people come along with the same question, create the sequence from your clip first. That will make it the right size and shape and frames per second to match up with your video.
You can do this by dragging the clip to the "New Item" button or just right-click on the clip in the project panel and select "New Sequence From Clip".
Once you have the perfect sequence just change it from this:
To this:
Then you can use the Motion effect on the clip to rotate it 90 degrees (or minus 90 degrees).
Unfortunately, you can't, as far as I know, rotate the clips in the project panel. Only in the sequence. So one possible solution, and it depends on the clips and your workflow, is to put all of the clips on the timeline, rotate them all by rotating the first one and copying the attributes to all of the others at one time. You can then take that sequence into the Source monitor and use it just like a clip. That is one of the great things about nested clips. From there you can cut it up into smaller clips if you so desire. It doesn't seem to be possible to create actual subclips from a sequence, but you cam mark the in and out points and drag them to the project panel, then rename them if so desired.
Some of my friends here on the forum seem to hate the concept of video shot in portrait mode on a phone or a video camera. However, there are times when it makes perfect sense to me. Especially when it is going to be displayed on a monitor that is oriented in portrait mode. Lots of advertising done that way. And who says that video on a web site has to be landscape? Why would you shoot the Eiffel Tower of the new Freedom Tower in landscape mode?
If you are shooting video of a person standing and talking to put on the side of a web page, portrait makes more sense.
Anyway, I hope this helps.

After importing word document in RH 9, why does the position of image changes

Hi All,
I have a document which i need to import in RH9. However when i imported the document, the position of the images on my first page changed.
i read several discussion, but could nt get any relevant suggestion.
the first page of my document has company logo and a text box on its left but when i am importing, the image is displayed separately and text box is displayed after the image. the first page is my cover page thats the reason it has text box.
Now can anyone please tell me how i can club the text box and image on a single htm.Robohelp also converts the text box and its data to an image format.
Thanks for your time and consideration

Hi there
As you have seen, RoboHelp doesn't understand how to create the layers you are wanting to achieve the effect in Word. It simply brings the images in as separate objects.
Basically there are two approaches you might consider.
You could insert Positioned Text Boxes and configure them to present the images as you want. If you take this approach, you will likely find yourself struggling to maintain the positioning consistently as well as noticing text flow issues. Personally, I'd avoid that approach.
The other approach involves displaying the images in your Word document so that you see them as intended, then screen capture so you grab the combined image. Then save that combined image and use it instead of the separate images in RoboHelp. This is the approach I'd suggest and that I use myself.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Why do the colors in images embedded in word (TIFF/JPEG) export off-color from Acrobat?

I chose this forum as opposed to the printing and pre-press forum because I have a very limited existing knowledge of color space and profile matching and I didn't want to be (1) shunned and (2) overwhelmed by the level of technical detail.
When I attempt to PDF a word document that contains a TIFF image, the TIFF image appears SIGNIFICANTLY off color. I was able to substantially correct the problem by extracting the TIFF image within the Word document and resaving it as a JPEG, but it still isn't 100%.
Here's what I know:
I'm using Windows 7; Word 2010; and Acrobat X. I also have Photoshop CS5.1 and InDesign CS4.
My color SETTINGS are matched in each application to be tied to my monitor, and my monitor is set to the system default, which is a system default: :sRGBIEC61966-2.1"
I'm using the document for professional purposes, so color matching is important to me, but I'm working with what is available to me at a nonprofit, so that means an Acer X183h monitor and a Canon iR C5185 networked office printer and no real color management policy or equipment.
I'm looking for the best possible solution to maintain color performance between the monitor and the printer.

Incredibly as I posted this the solution came to me - I leave it to the moderators to determine whether this should be preserved or deleted. I wasn't able to find any help on this and it might be valuable to other users.
The image itself that was embedded in the Word Document had a CMYK color profile. It was displaying appropriately in the software, but wouldn't convert to PDF or print. I opened the source file in Photoshop and converted it to my working profile, then re-added it to the word document and it is now reliably reproducing in the right color.
Since dropping outside images into word is a common (if also poor) work process for people creating documents in the nonprofit sector, I think this kind of information could be valuable in the knowlegebase.

Why does the frame color change to black when I copy and paste between documents?

Copying and pasting between documents in Indesign. The color of the text stays the same but the lines and frames change from a specified color to black. Also changes when I drag and drop can anyone tell me how to fix this?

You have not provided any exact information like what version of ID, system info, paragraph styles, color definitions and whatnot, so we can't know what is going on. either way, ask in the ID forum and provide all those important details.
Mylenium

How would I flip an image either horizontally or vertically?

I know I can rotate an image within Aperture clockwise or anticlockwise, but is there a way of flipping an image either horizontally or vertically? I was practicing with light painting and wrote something which I now need to flip so it reads more natural.
S

Yes. You have to enable the "flip" brick which is not enabled by default.
Above the histogram click the little "+" drop down box and choose 'flip'. You can flip horizontally or vertically.

Would you like to change the frame rate of the project to 30 to match to m

I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
Thus now I have a message asking what I noted above. Should I click CHANGE?
WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
Time for another snack. 8-(
-L
A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

AppleMan,
It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
-L

Hi, haven't used iMovie in years. I shot some video with my cell phone camera (Samsung Galaxy S2). When I tried to make a movie, the clips I downloaded played back sideways on iMovie. Is there any way I an flip the video from horizontal to vertical?

Hi, haven't used iMovie in years. I shot some video with my cell phone camera (Samsung Galaxy S2). When I tried to make a movie, the clips I downloaded played back sideways on iMovie. Is there any way I an flip the video from horizontal to vertical? Thanks.

You actually want a vertical video??
What would you show that on?!
Rotating video or photos in iMovie 11:
http://help.apple.com/imovie/#mov3a884fd3
In earlier versions of iMovie you can also do this using Quicktime Pro 7:
Open MOV file in QT Pro (QT 7.6.6)
Window -> Show Movie Properties
select "Video Track"
select "Visual Settings" from lower window
check "Preserve Aspect Ratio"
Click on appropriate rotation icon (MOV rotates!)
Click back on the open MOV in Player Window
FILE -> Save
You can also do this using TransformMovie, available here:
http://www.macupdate.com/info.php/id/21859

How do I flip a photo horizontally or vertically in iPhoto?

How do I flip a photo horizontally or vertically in iPhoto. I can rotate but can't figure out how to flip them.
Thanks

You will have to use another application. Preview will do it. Set up iPHoto to use Preview as the editor of choice. Then double click on the thumbnail to open it in Preview, flip the image and save.
Using 2 Image Editors in iPhoto
If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.

How can I flip a path vertically or horizontally?

Hi all,
I'm just getting to grips with paths.
I have created a path, which I want to copy, then flip the copy in the vertical axis, then join it onto the original, yeilding a path that is vertically symmetrical.
I can create the path OK, and I've figured out how to copy it.
BUT .... when I go to Edit > Transform Path ... the flip vertical and flip horizontal options are greyed out.
What am I doing wrong?
I'm using CS4 Extended v11.0.

Another way to accomplish what you want is after selecting the path with a path tool and using the transform box (Ctrl + T on Windows), drag the center of the transform box to the center of the left or right side and then in the Options bar under the main menu in the W field, type the - (minus sign) in front of 100% and press Enter until the transformation is applied.
I don't think there is a way to join two paths into one without using the pen tool (P) to connect them. So before mirroring the paths you may add a point near the end of the joining place so that you can delete a small part of the path by deleting the end points and then join these end points by clicking on each with the pen tool.

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertical

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertically and when I preview (on full-screen) what I've combined, first it's wide-screen, then it's tall, narrow with wide black sides.
The film looks choppy, no flow, since it alternates horizontally and vertically.
I can import the vertical clips two ways: "Full-Original Size", or "Large 960x540." But the vertical clips have very short, fat people.
This didn't happen with my Flip HD; the movies are smooth and terrific. My heart is breaking.....please, how can I make the videos match?

Yes, I'd like to use all the video I shot, put it together with music, titles, etc. and make it consistant. when it goes from full screen to this vertical, narrow clip, it's very awkward.....and it's so narrow, it's hard to see what I'm looking at; my eyes don't make the adjustment quickly.

Flip Horizontal and Flip Vertical

Hello Adobe,
Bridge implements rotate 90 cw, 90 ccw, and 180. Having these functions available as a right-click / cmd-click context menu is extremely convenient.
However, what about the companion flip horizontal and flip vertical operations ? This is a very common thing to want to do - particularly when working with scanned transparency images. Adobe Lightroom implements this - I belive.
Bridge team, can you add this small feature please ?
Sincerely,
Craig Hansen-Sturm

You can do multiple photo flips in Develop if you turn AutoSync on. Just make sure to turn it back off as it can cause all kinds of accidental messes

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

Hi, Thanks for that further bug description In Your Last Message That Describes The Problem I Am Having perfectly and is exactly the same for me.
unfortunately that fix for my camera Powershot G6 does not work or apply as the view pictures switch is different on G6 is not usable during download as once you plug in DC/USB cable it turns off, and makes no diff and problem still exists exactly as you just described.
thanks anyways "Selz Boy"
it has been 17 days since apple promised to get back to me within 3-5 days hopefully with a solution, but I have still not heard from them.
They blew me off, i guess, probably i will have to wait for new Yosemite OS update, which they pre-warned me could take as much as 6 months.
I cannot believe apple released this new update with such major bug issues for camera downloads and that horrible "Photos" pgm which has all sorts of downgrades in features, usefulness and new bugs compared to iPhotos which I just finally got used to and was much better software.
I am starting to lose faith in Apple and I am getting that Microsoft "FEEL" like I used to have when I was a PC user, which was why I originally switched to Apple computers in first place.
Oh well got my fingers crossed here.
Thankfully the memory card reader solution is working well, but cost me $45.

HT4623 My iphone 5 seems to be stuck in the horizontal view when I'm in the message mode. In all other views I can turn the phone 90 degrees and horizontal to vertical works fine. Not sure what the problem is.

My iphone 5 seems to be stuck in the horizontal view when I'm in the message mode. In all other views I can turn the phone 90 degrees and horizontal to vertical works fine. Not sure what the problem is.

I found a solution!
Perhaps this is just temporary, but I have my display up and working again.
Although the symptoms are different were a bit different, the solution here worked:
http://apple.stackexchange.com/questions/120259/grey-screen-after-login-blue-scr een-of-death-from-cmdr
As I was able to connect to my HD via an external monitor, in the finder, I went to:
1. Macintosh HD --> System --> Library --> Extensions
2. From there I moved all of the files that started with ADM and ATI (19 in total for me) to a folder on my desktop. (You will need to enter your admin password for this)
3. Next was a restart.
4. Then my display started working again.
5. After that, I transferred the files back into my Extensions folder.
6. I then did another restart with my fingers crossed and breath held. It worked.
Also... During the last few days of trying to find a fix, I restored a Mavericks backup to my computer away from Yosemite.
I'm very sure this problem occurred when I put my MBP to sleep, disconnected the power in its sleep, while something was connected to a USB port and unplugging the USB device (for me an iPhone charger) while the MBP was closed.
I hope this helps the next person.

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Why is the flip horizontal or vertical moving the frame or image?

Similar Messages

Maybe you are looking for