Why is the G4 beebing at start up ?

Hi everybody,
I'm trying to recover data from the 2nd HDD within my old G4. Odly enough, the G4 recognizes its 2nd HD sporadically and I almost got it backed up with Super Duper but had an issue with my external FireWire HD that I needed to sort out first to try and create a bootable external Disk.
But, as of last night, the G4 makes a weird beeping sound from time to time at startup. What could this mean ?

Unless your G4 has a built-in DVD drive or an AGP graphics slot & Firewire DVD drive, you can't upgrade it to Tiger without a limited offer Media Exchange program CD version of Tiger that was available many years ago. Tiger must be on discs that look like * and do not say Update, DropIn, or OEM to install on a machine that didn't come out after Tiger's April 25, 2005 release. It is also recommended you get your RAM to a minimum of 256 MB before upgrading it to Tiger.
10.3.9 is a perfectly good operating system to stick around with. If you need Spotlight like searching, or Dashboard Widget compatibility you can get that with 10.3.9 using third party addons. Please let me know if you are interested in learning about those.
- * Links to my pages may give me compensation.

Similar Messages

Why does the video stop and start using airplay on Mountain Lion?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

Why does the snmpcoll process always start up even if SNMP Statistics Collection is turned off?

Why does the snmpcoll process always start up even if SNMP
Statistics Collection is turned off?
<P>
The SNMP Statistics Collection field on the Server Status|SNMP
Subagent Configuration form affects only the SNMP subagent, which is a separate entity from
the collector process (snmpcoll). Currently, snmpcoll does not look
at the SNMP configuration data when it starts up. It is started by
the dispatcher and terminates when the dispatcher terminates. Many
of the statistics are supposed to reflect cumulative values recorded since MTA
initialization, such as the total number of messages sent and received.
As a convenience, the collector process collects information in the
background even while the SNMP subagent is turned off; this way,
the values are available when the SNMP subagent is configured and
turned on.

Collections fall off on the Date of First Deliquency 7-7.5 years later; that is supposed to be reported as the first time you went late (1-30 days) on the OC (original creditor) in the chain of events leading up to it's being farmed out for collection as I underestand it. DOFD though sometimes doesn't get reported right, and by default it will be the date the collection is added to the bureaus. As an example I have an awkward collection (not sure how I got it looking at the payment history thought I'd cancelled that account but TWC billing apparently didn't think so) which I went late on in 2009, but didn't get farmed out till late 2010. The DOFD is 6/09 looking at it, and it's expected to come off according to the bureaus 6/16 as a result. Different negatives have their own rules though.

Why does the server hang while starting up or the "csdb recover" hang when it is run?

Sometimes after iPlanet Calendar Server crashes, the server hangs during
startup or the csdb
utility hangs when I execute the recover
command.
<P>
One possible solution is to delete all of the .share
files in the same directory as the
Calendar Server database. In most cases, the server will successfully start up
again.

When you start up in Safe Mode various things aren't loaded at startup, Bob.
Have a thinbk about which of the following may be involved in your own case:
It forces a directory check of the startup volume.
It loads only required kernel extensions (some of the items in /System/Library/Extensions).
It runs only Apple-installed startup items (some of the items in /Library/StartupItems and /System/Library/StartupItems - and different than login items).
Mac OS X 10.4 Tiger only: It disables all fonts other than those in /System/Library/Fonts .
Mac OS X 10.4 Tiger only: It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501.
Mac OS X 10.4 Tiger only: It disables any Login Items.
(from http://docs.info.apple.com/article.html?artnum=107392)
Have a look at http://docs.info.apple.com/article.html?artnum=106464 for some more possibilities.
You may find it worth while using System Prefernces/Accounts to creat a new admin user account and see if the problem persists with it. THis may help you narrow down the problem further.
Cheers
Rod

Why is the Plugin Check suddenly starting up automatically when I open Firefox, and how do I stop it?

Instead of Firefox opening to my homepage, as it has been doing for several years now, it opens to a Plugin Check screen. I don't know why this started, and I haven't found a way to prevent this from happening. What can I do?

That is a bug with blocklisting plugins that has been fixed.<br />
You can correct this issue by forcing the file blocklist.xml to update or wait until Firefox updates the file.<br />
That update will remove the severity="0" flags in the file that cause the problem.
See:
* [/questions/832793?page=2#answer-198407]
* http://forums.mozillazine.org/viewtopic.php?p=10899869#p10899869
* [https://bugzilla.mozilla.org/show_bug.cgi?id=663722 Bug 663722] - The blocklist output is including severity="0" where it shouldn't be

Why does the time transport display start at 1 hour in LPX

Hi, I'm new to Logic Pro X and I am really confused about something. In the transport (or control bar, whatever) display, with it set at TIME, why does it keep defaulting to 01:00:00.000 instead of all zeros? I am recording voice, and as I hit the one hour mark of recording, it actually indicates two hours. Why and how can I fix this? Thanks, Al

Blueberry, thanks for the reply, however, it just doesn't make sense. In Garageband, the beginning of the audio track is 0. When I've recorded an hours worth of audio, Garageband will show 01:00:00.000. But in LPX, that isn't true. At one hour, it will show 02:00:00.000. It seems illogical to me.

I can't get the update download to start?

why wont the flash player update start on my Mac Book Air?

Please refer : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

I have an iMac. , mid 2007. Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile. Save a file, close a file, open a file, open a window, it's all random. Somtimes it stalls, sometimes it doesn't. Why?

I have an iMac. , mid 2007. Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile. Save a file, close a file, open a file, open a window, it's all random. Somtimes it stalls, sometimes it doesn't. Sometimes long, sometims short. Why is this happening?

Consider adding more memory. Be sure you have adequate free space on the hard drive - 15 GBs or 10% of the drive's capacity, whichever is greater. Do not run too many applications concurrently. Visit The XLab FAQs and read the FAQ on resolving the SBBOD.
Do some maintenance:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

HT1351 Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

Try here:
iTunes: Error 13019 during sync
Not updating the iOS should not effect your problem.
As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC?

Why does the folder "C:\Program Files\Adobe\Elements" open automatically when I start my PC? How do I adjust settings to stop this from happening?

Hi,
This folder is probably treated as a program to run at startup.
So you will have to look at the places where such programs are referenced.
For instance, you may have a shortcut to that folder in your Start Menu > Startup.
Or it may be in the Registry.
Click on Start > Execute, the type msconfig and click OK.
This will show you in the Startup tab all the programs launched at startup.
Astugev

Why is the iTunes Store crash when I start in on the iPhone 5 with the iOS 07 update?

Why is the iTunes Store crash when I start in on the iPhone 5 with the iOS 07 update?

Hi,
Do you have iTunes 11 on your imac? What OS X do you have?
Jim

Why are the threads start and terminate randomly?

Hi there,
I got the program below. I am wondering why are the threads start and terminate randomly? Everytime, I run the program, it produces different results.
I know that these four threads have got same normal priority (should be 5), and under windows there is something called timeslice. Then these four threads rotate using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why the results are ramdom?
Thanks in advance!
* To change this template, choose Tools | Templates
* and open the template in the editor.
package mythreadone;
* @author Administrator
public class MyThreadOne implements Runnable {
String tName;
Thread t;
MyThreadOne(String threadName) {
tName = threadName;
t = new Thread(this, tName);
t.start();
public void run() {
try {
System.out.println("Thread: " + tName);
Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println("Exception: Thread "
+ tName + " interrupted");
System.out.println("Terminating thread: " + tName);
public static void main(String args[]) {
// Why are the threads start and terminate randomly?
new MyThreadOne("1");
new MyThreadOne("2");
new MyThreadOne("3");
new MyThreadOne("4");
try {
Thread.sleep(10000);
// Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println(
"Exception: Thread main interrupted.");
System.out.println(
"Terminating thread: main thread.");
1. Firstly, I set in the main function:
Thread.sleep(10000);
and I run the program it gives:
Thread: 1
Thread: 4
Thread: 2
Thread: 3
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Run it again, it gives:
Thread: 2
Thread: 4
Thread: 3
Thread: 1
Terminating thread: 2
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
And my question was why it outputs like this? It suppose to be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Why these four threads start and finish randomly each time I run the program? I use Windows, suppose there is a timeslice (i.e. 1 second), these threads have the same priority. Then the threads should start and finish in turn one by one. Am I right?
2. My second question is:
When I change the codes in the 'main' function into:
Thread.sleep(10000); -> Thread.sleep(2000);
it gives me the results like:
Thread: 1
Thread: 4
Thread: 3
Thread: 2
Terminating thread: main thread.
Terminating thread: 1
Terminating thread: 4
Terminating thread: 3
Terminating thread: 2
BUILD SUCCESSFUL (total time: 2 seconds)
Run it again:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: main thread.
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I tried several times. The main thread always terminates before or after the first child thread finished.
My question is why it doesn't output something like:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
or
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 2 seconds)

user13476736 wrote:
Yes, my machine has multi-core. Then you mean that if I got a one core machine the result should always be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
???No.
>
How to explain my second quesiton then? Why the main thread always terminates before some of the child threads end? Thanks a lot.

WHY DO THE VIDEOS I AM TRYING TO VIEW (YOU TUBE ETC) START AND STOP ALL THE TIME.. I HATE THAT!!!

Why do the videos that I am trying to view (you tube etc) always start and stop. it is very annoying and I can't seem to fix it.... thanks for your pointers... as you can see, I am not a techie. the fact that numbers, letters and picture appear on my computer screen is

Make sure you are using the latest version of Adobe Flash Player.
A suggestion:
Go to YouTube, open any video and press pause (don't do this while video is playing).
Click the ctrl key or “right click” the mouse in the middle of the video window. The settings for flash player will pop up.
Select the video settings then select "enable hardware acceleration."
Press close.
Now RESTART YOUR COMPUTER not just Safari if that is your browser of choice.

Why is the G4 beebing at start up ?

Similar Messages

Maybe you are looking for