Why is the green screen visible on the last frame before the next clip?

Hey guys!
Maybe I'm ******** but i m having trouble here. I have "key-ed" a bunch of clips and successfully removed the green screen from them. But when placed in the timeline, the green screen of the clip reappears for the single frame before a next clip starts.
I've re-rendered and chopped ends off but the green screen keeps appearing in the last frame of any keyed clip that is about to cut to a different clip.
Where am i going wrong?

Hey! I tried both suggestions but even the self contained quicktime file has the green screen frames popping up.
I just dont get it, it's infuriating!
I used "chroma keyer" effect on the clip, only enable "key on saturation", the green screen disappears, I place clip on V2 and image on V1. Image is then visible where the green screen was. All is well until the last frame before a next clip because on that ast frame the green screen appears again. Where am I going wrong? Please help!

Similar Messages

  • I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    I am creating a video using the green screen option in iMovie.   I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • When I restart my computer instead of the gray screen that is supposed to appear before the login screen it shows a screen with a lot of letter

    I upgrade my ssd for my macbook pro retina from the 256 to 480 GB but when I tunr it on or restarted the computer the gray screen that is suppost to apper dosent show insted a screen with lettler show before the login screen besides that the computer works fine. 

    I cannot decipher what is written on the images you have posted but they are reminiscent of what I have seen when a MBP is dealing with some totally incompatible software or perhaps in your case hardware.
    How and or who installed the larger SSD and what manufacture is it.  I suspect that is the problem.
    Ciao.

  • Correcting the Green screen tint appearing while loading images to the screen?

    .... the Infamous Green tint that invades the screen, is still there on a whole lot of images - not all, a problem which occurs while images are loading to the screen for viewing. And it's on both the iMac whee it started, and the Macbook.
    It was a problem that resulted from an Aperture update last year I think.  Any clues?
    Thanks,
    Raphael

    Today, after a year of trying to get rid of thei problem, an Aperture "Craetive" at the Apple store found a way to correct it after contemplating it for about 15 seconds.
    Here is the remedy:
    To get rid of it, select image(s), go to Photo in the menu bar, hold down Option key, click on Generate Preview in the drop down menu. Wait for it to finish processing - a few seconds. Done.

  • [SOLVED] Gnome 3 == The Green Screen of Death

    Greetings,
    Trying to load GNOME 3 seems to result constantly in nothing but a bright green screen and mouse, despite anything else I've tried. Nothing else loads. I have to change tty to do anything else. Doing so, I executed htop and saw that only 2% of my CPU was being used, and the only thing from GNOME3 that was running was GDM.
    These are the steps I have taken before posting in here....
    1.) I followed the steps in the wiki for upgrading to GNOME3. Testing repo is the first repo.
    ----- That brought me into fallback mode but was missing many things. Upon investigation I saw that I had never fully installed GNOME 2 to begin with, that I only had XFCE and GNOME stuff that were brought in as dependecies to some other programs I had installed. So.....
    2.) pacman -Rcns gnome followed by following the Wiki for installing from scratch.
    ----- Got the correct GDM (takes a while to load it), but only get the green screen with mouse cursor.
    3.) Thinks and searches, "Hey I need pulseaudio... maybe that is why it isn't working." So I follow the wiki on installing pulseaudio.
    ----- Still, green screen
    4.) Maybe, just maybe, it doesn't like the nouvela driver? So I change to nvidia.
    ----- Still, green screen
    5.) Try another pacman -Syu.
    ----- Nothing new related to gnome 3 updates. Still green screen.
    6.) Search frantically on google for anything related to GNOME 3 not loading or showing a green screen. Searched here as well.
    ----- Found nothing. Still has a freaking green screen upon reboot of system (thankfully I have laptop here to use while trying to figure this out but damn, I am getting aggravated by this frustrating issue).
    EDIT: Just in case it is relevant, I am using the inittab method of loading GDM.
    EDIT 2: Forgot to add, I also removed all old instances of gconf and gconfd and such in an attempt to solve the green screen.
    Defeated, I come here. Does anyone have any advise, suggestions, etc or does this spell the end of GNOME 3 on my computer?
    Last edited by mythus (2011-04-08 15:00:17)

    Greetings,
    I have solved this issue. The conflict was with firefox4-beta-opensuse. I replaced it with firefox from the official repositories, and *poof*, I am now in Gnome3 with Gnome shell.
    LOL, yeah I tried those things which is what led me to the answer. Actually, it was the lack of libmozjs.so anywhere on my system combined with a google search indicating that it was supposed to be in xulrunner, yet it wasn't. That is what led me to re-uploading firefox completely so that I could do away with the beta xulrunner.
    Did you still need that pacman -Qm list? I am going to assume no since it is solved, but who knows, you may have seen something else in my pastebin report as well. Anyways thanks!

  • I was making a movie on iMovie, and the green screen wasn't working.

    I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.  I tried agian with some different clips, and only some of them worked. This hasn't happened before! I was just wondering why this would be happening and what I should do? (I am using iMovie '09)

    Hi
    YOU need to - in iMovie - Turn on Advanced Tools !
    top row menu - with an Apple top left ---> iMovie ---> down to preferences ---> Here select to turn on Advanced tools .
    Now it will work when You drop a clip onto another IN a MOVIE PROJECT ! (can not be done in Event's)
    Next problem I had - was to get right clip onto the other - what was the Background and What was the Green screen - BUT just test - You only got two ways to try out.
    Yours Bengt W

  • I can't find the green screen key in the Effects menu in Adobe Premiere Elements 12

    Is there anybody who can help me were I can find the green screen key in premiere element 12. According tutorial video's on You Tube there must be a green screen key in the effects menu under keying, but with me it doesn't seem to be there.

    jajajoja
    Thanks for the reply. Glad you asked. Please check out my blog post on the use of the Difference Matte, especially for the Premiere Elements Mac users who run into this Windows Only situation.
    ATR Premiere Elements Troubleshooting: PE11: Difference Matte As Substitute for Green or Blue Screen Key
    We are not Adobe. Rather user to user. So, I am not sure why these keying features are not included in Premiere Elements Mac.
    Please review and consider the above, and, if any questions, please do not hesitate to ask.
    Best wishes.
    ATR

  • The Green Screen and Video Problems

    Hello,
    I've read through the issues and answers on this topic but some of the things are working and some not.  For isntance, I was able to resolve one of my issues with some other fixes I had found through general online forums for the "green" screen which plays with only audio.  It seems to be working for me on you tube but not on Facebook anymore alhtough Facebook videos worked the first time around when I rebooted.
    What I did was go into my internet options and under accelerated graphics I ticked use software rendering instead of...
    and under the security tab I ticked enable 64 bit processes in enhanced protected...  Should the Enhanced protected mode be enabled as well then?  Should I tick that option.
    I also treid to do what the answers recommended...such as right clicking on the video in Facebook when it is playing and while I do get a pop up I get settings options or global settings and adobe flash player info...clicking on settings gives me options but none for the "display", only for my microphone, camera and storage.  If I click on global settings, it takes me to flash player help.  And last option I get my version of Adobe info, which is version 13.00.214.  So no option to untick disable accelerated graphics cause I think I've done this in control panel already.
    But now why it is working with youtube and not with Facebook videos  I also tried to play some home videos like wmv files and other video files in my windows media flash player and there I get a black screen but still audio plays.
    My computer is an HP Pavillion Notebook PC and it came with Windows 8.1 already installed.  My Graphics Display adapter is an AMD Radeon R5 Graphics Card.
    So what the heck do I do now.  Should I install newer Adode Player?  Even when unticking the accelerated graphis option, this is really not a solution to the deeper problem and issue, because then it slows down your graphics?  
    My computer is not even a week old and I hate having to always download fixes and constant updates and spend hours researching and trying to fix a problem that really should not occur to begin with.  Why are there so many glitches with Windows?  Is this a problem related with windows updates as well.  Active X controls?  Compatibility isuses with 64 bit processes.  Should I use Firefox.  I did that with my old HP which finally kicked the bucket and that is why I had to buy a new one.  I had to replace my battery before even a year and my warranty battery did not last that long either and then the thing finally overheated and died.  But I had lots of similar things happen before with last HP laptop so is it Windows or is it HP or is it browsers, players? 
    I am sorry if I am unloading on you...I don't mean too but it is just soooo frustrating as a consumer to have to always go through these kinds of things.  I use my laptop for self employment so please help!!!!!
    Thanks for letting me vent..  I would appreciate your help, thank you.
    A frustrated customer
    This question was solved.
    View Solution.

    Thank you for visiting the HP Support Forums and Welcome. I am sorry you have experience any issues.  I have looked into your issue with the Video issues.
    Have you uninstalled Internet Explorer?
    Have you tried Google Chrome?
    It already includes Adobe® Flash® Player built-in. Google Chrome will automatically update when new versions of Flash Player are available. Adobe are on version 15. Here is a spot to update. This does have a link to Google Chrome as well.
    Here is a link to common Flashplayer issues.
    I would try a system restore as this would undo any changes that might have happened with a Microsoft update. Sometimes they have not finished or been installed on the Notebook.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Has anyone actually got the Green Screen feature to work?

    Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

    After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
    Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

  • I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

    I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

    No guarantess but try smc and pram resets,

  • How can I use the green screen with iMovie?

    Hey guys! I was wondering how does the green screen effect work with iMovie 11? I need to use green screen in iMovie in school for a project and I am trying to troubleshoot the problem.
    Help is appreciated.
    Thanks,
    Ben

    Record a video against a green screen and import it to imovie.
    Then place the green screen footage ON TOP of the background you want and a list should come up. Select green screen. Also, before you do any of that make sure that your advanced tools are selected under preferences in imovie.

  • What has happened to the green screen feature in version 9.4? Where did it go?

    I have a shiny new desktop Imac and tried to access the green screen feature in Imovie that works fine on ver 9.2 that I have installed on my laptop, only to find the option no longer exists. Did they remove it??

    It's part of the 'Advanced Tools' in iMovie. I think Advanced tools is turned off in a new iMovie install. To turn it on:
    Go to the iMovie Menu > Preferences > Show Advanced Tools (make sure the box is checked)
    When the advanced tools are turned on, you will see Green Screen appear as an option in the pop-up menu as you drag one video clip from your Events Library on top of any clip in your Project timeline.

  • I have been using iphone 5. Whenever I open the Game Center, The green screen of accounts comes up and it get stuck. Nothing happens after that. If anyone can help me please.

    I have been using iphone 5. Whenever I open the Game Center, The green screen of accounts comes up and it get stuck. Nothing happens after that. If anyone can help me please.

    Refer to this article to delete SC files:
    iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading
    http://support.apple.com/kb/TS1776
    Then proceed to repair your QuickTime on Control Panel>Add n Remove Programs >highlight QuickTime, click CHANGE button, then REPAIR.

  • Where is the green screen key in Premier Elements 10 for Mac?

    Anybody know where the green screen key feature is?  Or how to edit green screen videos?  Plenty of tutorials on YouTube but I can't find the Green Screen effect.  Thanks.

    There are some PrE Effects, that are only available on the PC, though not for the Mac, but I do not have a list handy,
    I do not recall if Green Screen Keying might be one of them.
    Perhaps our MOD, Steve Grisettin, who is fully X-platform, can comment.
    Good luck,
    Hunt

  • Where is the green screen keying effect in Premiere Elements 12 for Mac?

    I have installed Premiere Elements 12 on My Mac, and I can't find the green screen keying effect in the efx window. Is this only available in the Windows version, or is it somewhere else in this version?

    mgeiser
    Premiere Elements 12 Mac does not come with ChromaKey, GreenScreen Key, or BlueScreen Key.
    Videomerge is not a renaming of GreenScreen Key. It is just a substitute suggested by some for ChromaKey, GreenScreen Key, or BlueScreen Key that are not included in Premiere Elements 12 Mac.
    If you want a substitute for ChromaKey, GreenScreen Key, or BlueScreen Key, I would suggest that you look at the Difference Matte under fx Effects/Keying/.
    Please check out my how to on that.
    http://www.atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
    It has gotten a lot of good feedback from Premiere Elements Mac users.
    Please let us know the outcome.
    Thank you.
    ATR

Maybe you are looking for

  • Urgent......  how to select few fields, from database table, (dynamic ita.)

    Dear all experts, I am able to populate all fields data from database table, using dynamic table creation. eg, SELECT *    FROM (w_tabname)    INTO    TABLE <t_itab>. where w_tabname is the table name given by the user, and t_itab is field symbol. bu

  • Issue regarding Ship to party

    1.How can we get 10 shipto party at a time in customer master? what  is the procedure to create 10 ship to party for single customer master. 2. how can we change Account group? Plz send me reply Thanks in Advance Venkata Ramana

  • Using iPhoto Book Themes in Aperture

    I would like to use the iPhoto book themes in Aperture. Anyway of importing them. Thanks, Paul. iMac Intel Core Duo 20", 2 GB RAM   Mac OS X (10.4.6)   Nikon Coolscan V ED, Nikon D200, Iomega MiniMax

  • About callable object-send notification

    Hi expertise, when i create a callable object-send notification,when i test it,an exception occurs: java.lang.NoClassDefFoundError: javax/activation/DataHandler     at com.sap.caf.eu.gp.model.fnd.mail.MailFactory.createBodyPart(MailFactory.java:468)

  • Bypassing proxy for certain domains

    i have been advised that i can use an XML tag called <dontProxyFor> to bypass the use of a proxy server for certain host/domains in a URL-based portlet. The node is a child node of <proxyInfo>. i am using Portal 3.0.9.8.4 on Solaris. i have made the