Why is the Image in Canvas Square?

I have about a dozen video clips in my Sequence - they are all DV/DVCPRO - NTSC, 720x480. The sequence settings are 720x480 NTSC DV (3:2), Pixel Aspect Ratio NTSC - CCIR 601 - DV 720/480 and the Compressor DV/DVCPRO - NTSC.
Question: Why is the image in the Canvas square?
Thanks in advance for any help.
Brian

it looks stretched taller.
I think you have Anamorphic material.
Start a new Sequence. Go to Sequence > Settings and click the Anamorphic checkbox.
Select a clip in the Browser. Press command and 9. Find Anamorphic in the column on the left.
Click next to it in the Clip column to place a check mark there too.
Edit into the timeline.
Does that look better?

Similar Messages

Why is the image in iMovie reversed?

Why is the image in iMovie reversed? My right hand shows as the left hand and what should be over my right shoulder shows as being over my left. I cannot find any info regarding this. When I open iChat the image is oriented correctly.

it looks stretched taller.
I think you have Anamorphic material.
Start a new Sequence. Go to Sequence > Settings and click the Anamorphic checkbox.
Select a clip in the Browser. Press command and 9. Find Anamorphic in the column on the left.
Click next to it in the Clip column to place a check mark there too.
Edit into the timeline.
Does that look better?

Can anyone explain me how to scale the image in canvas in flash builder 4.6

Can anyone explain me how to scale the image in canvas in flash builder 4.6, Scaling of image in component , can i get some examples .. it should set almost all size screen

Iphone 4s with upgrade to ios 6, why are the images I save "save photo" not in my camera roll?

I have an iphone 4s upgraded with ios 6. Why are the images I save "save photo" not in my camera roll? Where do they go?
Thx,
surfin steve

Hey, I just had this problem, I went into Settings -> Privacy-> Facebook (which is where I was saving photos from) -> turned it on, then back to settings -> Facebook-> and logged in. When I went back to Facebook and saved a photo and it saved to my camera roll. I haven't tried it with anything else yet though. Hope this helps!

When moving to Aperture 3, why upgrade the imaging system all at once?

I have been reading about the library migration issues when upgrading to Aperture 3 and my question is this: what is the advantage, if any, of attempting to migrate all the images instead of just upgrading the database and tackling the images as needed? For example, with a 60 gig library of previously edited images, why would I bother migrating all the images when I could simply do that one image at a time, as needed, to take advantage of the new editing tools? Wouldn't this approach make the upgrade process infinitely smoother and faster?
Apple says much the same thing is their support article here: http://support.apple.com/kb/HT3945
So, for those of you forcing the images update process along with the database upgrade, my question is why take the risk? Yes I know it is supposed to work, and it probably does for most people, but why bother taking that risk for images you have already edited when you can easily do it an image at a time? Am I missing something?

IDImager allows for Keywords to be written in hierarchical format. This means each individual keyword includes the parent keywords like this: "Others|Import|2009|2009-02-22". The only debate in my mind is about what will be more time consuming, writing and debugging a script to have exiftool extract the keywords and apply them hierarchical, or doing this task manually.
From playing with the Aperture trial I deducted that making changes to keywords in the keyword HUD applies these changes to all images. Changing the "fred" keyword to "Freddy" will update all images that have the original "fred" keyword applied.
We'll see. I am certainly not new to programming but have not used AppleScript before. Am still searching for a comprehensive guide and scripting examples that would help in pulling this off. But as I get closer to having the pre-processing outside of Aperture done for all of my images and very little accomplished in terms of the script I am leaning towards manually fixing my keywords.
Adi

Why wont the images of my events show up in my project???

Every time i start up final cut pro x my current project is completely fine. After i start working on it and moving events around in the project all of the images in the events that i have put in my project don't show up, load or re appear at all. No idea why this is happening, i even tried freeing up hardware space and deleted alot of events in my event library, by the way i just bought final cut pro x and this happened within 2 days of using it, please someone help!!!!!!!!!!!!!!!

Have you tried trashing the preferences?
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Why is the image cropped in landscape mode

Hi - I made video from a collation of youtube clips and transcoded it to iPad default settings in FCPX but when I view it on iPad the image along with the subtitles are cropped in landscape mode, why is that when the transcode settings list iPad 3 as included. How, or what do I need to do to fix this problem please.

The iPad display is 2048x1536 pixels which is 4x3 aspect ratio. When you display a 1280x720 video which is 16x9 aspect ratio you will get bars at top and bottom of the iPad screen. Any attempt to fill the screen by scaling etc will cause you to lose part of the frame edges. You have not stated what your project properties were in FCP. If they were 1920x1080 or 1280x720 then you might try an SD project ie 4x3 and see what sharing does for that. I haven't tried it but I suspect it will be 4x3 and fill your iPad screen. The issue may be the aspect ratio of your youtube clips. If they are wide screen which I suspect then you would see the bars in FCP storyline and your are back to the same issue when you export. You could in this case use the transform tools etc in FCP to fill the screen and pan the clips to not lose subtitles. It's a fiddling process. Hope this clarifies a bit.

Why is the image in my capture window of Premiere Pro 2 is too large.

The image in my capture window of Premiere Pro 2 is too large, however the capture is correct on the time line for editing.
Why is it too large? and how do I correct it?
Thank you for taking the time to read this e-mail and for answering my question.
Yours truly,
Thom Elliott
Photographer

Also, for future reference, PPro2 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous?view=all
For this discussion, what are you editing?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Why do the images stop?

I've recorded a piece of VO for a slide thats 1:15 min long.
I added images to the timeline and overlapped them a couple seconds for nice transitions.
Everything plays fine when I click the little play button on the bottom of the timeline.
All the images transition perfectly as the timeline plays.
The problem I'm having is when I publish the audio plays but the images stop after the first 3 sec. image plays it just sits on that image while the VO continues.
I've checked the properties of the images and sound to see if something is stopping the images from playing but I just can't figure out why it won't go past the first image.
Also is there a way to turn off the progress bar on the project? I don't feel it is needed for this.
Please someone let me know what I might be doing wrong. I've spent most of the day trying to fix this.
Best,
Dan

Hello and welcome to the forum,
Could you please post a screenshot of the timeline? Perhaps you have an interactive object with a pausing point that causes the playhead to stop.
Do you have the same effect when using a real preview (F4, F8, F10 or best of all F12)? Playing the slide doesn't generate a temporary SWF, it is not a real preview but mostly meant to do synchronizing on the timeline.
Lilybiri

Why does the image not open in Elements when I opt for Edit in Photoshop Elements 11 from the Photos tab in Aperture?

With an image in Aperture, when I got Photos one of the options offered is "Edit in Elements Photoshop 11", but although selecting this opens Elements, there is no image and it is necessary to open the image in the normal way from within Elements. Other plugins, e.g. from Topaz work superbly from within Aperture. I am puzzled to know the reason, and in particular if there is any setting in either Aperture of Elements that need to be attended to. I would be very grateful for any suggestions.
Barry Willcock

Hi Frank, and many thanks. I can now get the picture into Elements, and work on it. However, when I have finished, I save it (giving it another name that I can recognise if the amendments are slight) it puts the file back into the same folder, but I have then to import it into the Aperture library in order to see it back in Aperture. Not a big problem, but an interesting one.
Again, many thanks
Barry

Why is the image moving when I print on 300gsm card, but is fine on 160gsm paper?

Hello,
I am printing a double sided invitation for a customer. I am not sure what it was originally set in as I have only been given the pdf up to now. The invite has a thin black line around the writing.
I am trying to put a proof together so they can see it on the colour they've chosen, when I cut it out (using their crop marks) on 160gsm everything lines up nicely, however, when I cut it out from 300gsm I end up cutting either the top or the bottom off as the image has moved. I am sure this is down to the weight of the card but how do I (or the customer) counteract this and what is the term for the issue? (If there is one)
Thanks
Louise

Can you duplex the 300 gsm card inside the machine?
Or are you forced to print one side and then run the cardstock through the machine 2nd time to print the other side?
Double sided heavier cardstock is more problematic than paper and this issue is a common occurence.
Are you using the bypass tray or (if your printer allows it from a drawer?. usually there are limits to the stocks that can be run from drawers on smaller, less expensive machines)
It may help if you make sure the correct media type/weight and drawer/bypass tray is selected correctly in your print dialog/print setup.
There may be more than 1 place to select these parameters; check them all
Also check the media/weight setting on the printer itself for the bypass or drawer you are using.
There may be no real solution to achieving perfect registration from front to back on all type of media in your machine.
Good Luck!
Just realized you are printing from PDF. Make sure that Actual Size in selected each time in the print dialog when printing both sides. sometimes it defaults to Fit when you aren't paying attention and this can cause problems.
You wrote: The invite has a thin black line around the writing.
Do you mean they placed a stroked box around the edge of the invitation? This is a no-no. The crop marks should be adequate. A thin stroked box at the trim size will be an invitation to disaster when cutting a stack of printed items, even single sided would be hell, Double sided, forget it. Have them remove the box and just have crop marks. When cutting you will obviously cut off some of the marks which makes it difficult to determine the later cuts. This is when you get out a ruler to determine the settings you need to make for these cuts using your cutter.

Why are the images on my screen in InDesign so crisp/clear and when I export to PDF to print they are blurry?

Top Picture is while the program, bottom is when exported as a PDF

Hi Kathdepew,
You are checking the PDF in Preview, please look it at Adobe Reader/Acrobat. Preview is not a recommended soft-proofing application.
Also, check you PDF export settings, it seems the images are being down-sampled. To know better, export the PDF with "High quality presets" and then check.
-Manish

Why are the images not printing from InCopy? Why is the relink button in Links panel ghosted?

I am having a problem with printing from Incopy. All stories are editable and that is working just fine. I am able to view the images although AD has set the graphics to not be editable yet I can still see them of course.
My problem is upon wanting to print the layout. Getting a message that the image links are missing. I have not moved the original folders (they are all set up on the same level in one main folder). I am working remotely, layout based workflow via dropbox.
My client would like to have the option to print layouts also initially. How can I relink the images if the "relink" button is ghosted. Can somebody help me please? I have tried doing a restart… Any ideas?

the-edmeister, you are a genious. I went to "view" then "toolbars" and de-selected "yahoo toolbar" and then moved the curser over my firefox page and it now works completely including the problem area (the top 3 cm of each screen). Thank you, thank you, thank you, thank you, thank you, thank you. You have no idea how good I feel know on this otherwise cold, windy and rainy day.

Why is the image cropped?

Perhaps I haven't noticed this before...
Because of emminent system failure, I purchased a new PC with Windows7 (upgrade (?) from Windows XP) and then upgraded Photoshop to CS5 from CS3. However, I notice that when I rotate a "landscape image" and make it a "portrait", I find that the image appears to be cropped automatically, rather than retain the aspect ratio of the "lanscape image"; it appears that the former height in the landscape, becomes the new height in the portrait . I think it has something to do with the aspect ratio, as manipulating this seems to alleviate the symptom somewhat. It also appears to be present in the other image viewers that are not Adobe. Can anyone explain this and direct me to information on how to correct this problem?

Pro_gra_b wrote:
...when I rotate a "landscape image" and make it a "portrait"...
How are you doing this, exactly?
You need to rotate your entire image document.
Try this: Choose Image - Image Rotation - 90 Degrees Counterclockwise (or the appropriate choice). What do you see?
-Noel

Why does the image go blurry when I export my file to jpeg from Illustrator CS6?

Hi,
I have created an image on illusrator CS6 and am ready to save it.
I have saved it as a pdf format and the image stays as a sharp vector image and not blurry at all.
But I also want to keep the image as a jpeg. So when I go to export the image from illustrator CS6 as a jpeg, the end result comes out blurry and not sharp anymore, but more jagged on the edges of the image.
Is there anything I can do to keep my file as a jpeg with it staying as a sharp crisp image?

The image above is a screenshot of the ai.file
Above - second image is the screenshot of my export settings
the 3rd image above is a close up zoomed in part of the image - the edges are jagged and blurry

Why is the Image in Canvas Square?

Similar Messages

Maybe you are looking for