Why is the image on my screen changing when I switch between the library and develop modules?

I've noticed in the past couple of days that I will be refining an image in the develop module, feel I've gotten it the way I want it to look, and then switch back to the library module to export. When I do so, I notice the colors are quite different than they were just a second ago in the develop module. When I switch back to the develop module, it goes back to the way it looked in the develop module. How might I fix this?

Is what you see in Library the original, camera-embedded preview or is it just a messed up version of the LR-rendering?  You can test this by making a significant change to an image with the problem (Exposure -4 or Saturation +100) and see if the Library Preview also darkens (or the colors saturate) significantly or not.  You might also try explicitly telling LR to recompute the  Standard then the 1:1 preview to see if either of those show up in Library.
If the Library view never shows any LR adjustments and is always the camera-embedded JPG preview or a LR-preview from some days ago that never changes no matter what you do in Develop, now, then your Previews cache is likely corrupted and the entire should probably be deleted so LR can rebuild them.  The previews folder is called catalogname Previews.lrdata and is a subfolder of where your catalog file (.lrcat) is stored.  You can location your catalog by going to the General tab in the Catalog Preferences and clicking the Locate button.  You should exit LR before trying to delete the Previews subfolder and make sure you’re not deleting the catalog or backups folder, just the folder with Previews.lrdata in the name.
If the Library view just shows a different-looking version of the LR adjustments then perhaps something is wrong with the display-driver or the monitor’s color profile.

Similar Messages

  • Why does Pages ask me to save changes when I only open a file and print it?

    I have documents that I open regularly but only want to print (and not make changes to).  But, even if I open them and do nothing other than print them, Pages prompts me to save changes when I close the file.  Why is this? 
    If I've had the document open for a while, I'm always concerned that maybe I've made changes that I want to save and forgotten.

    But it always, always, always ignores it, fruhulda. That's what I'm saying. A brand new document on a brand new computer with a fresh install of iwork, and the same thing happens. Every time I open it and print--Do you want to Save? Do you want to Save?
    For instance, I have a contract form I use regularly and I get that every.single.time even though I always use the same printer, and have hardly ever used the printer that pages has chosen as my default printer (a medium format inkjet with archival ink that costs far too much to use for things like correspondence). It is not my default printer in OS X, incidentally. No matter how many times I tell Pages to save the information about the printer, it will not. And I also get the same nag on the rare occasions when I do use the printer that pages has chosen (usually by mistake because I forgot to change it in the print dialog).
    Perhaps this is a localization-specific bug and that's why you don't see it.
    EDIT And most oddly, it happens just the same in lion with the current version of pages, which I would have thought should have autosaved that change without asking me about it.

  • Modification dates change when moving/copying between hard-drive and flash

    I use a flash drive to store most of my work-related documents on. That way, I have them when I'm at school (on a Windows XP computer) and at home on my Mac OS 10.3.9. I
    try to occasionally back-up my flash drive by dragging it's contents to my Mac. Copying in this direction USUALLY retains the appropriate modification date.
    However, if I move things from the Mac to the USB drive (I occasionally make changes to a file on the Mac when my flashdrive isn't handy), the modification date changes to the copy/move date. Is there a way around this? It alters the information about the file and sometimes makes a version look newer than another version of a document. When in reality, it’s older--it’s just been moved/copied and the date changed.
    I often move things back and forth for backup purposes, but if it keeps changing the dates on it’s own, it’s impossible to tell which is REALLY the
    most current copy/version.
    Is there a fix so that copying and moving files between volumes does NOT change the modification date of the file?
    Powerbook G4--12 in.--1.33 GHz   Mac OS X (10.3.9)  

    Hi, teacher. When my Lexar JumpDrive Secure is formatted as a MS-DOS volume so a PC can read it, the last-mod dates of files that I copy to it are changed to the date and time of copying. When it's formatted as a Mac OS Extended volume, the original last-mod dates are copied to it unchanged. Looks like you can thank Bill Gates for the inconvenience: apparently it's a DOS file system "feature". Don't you wish you could use Windoze all the time?
    On second thought, the files really are changed when you write them to a DOS volume, because the DOS file system has no place to store the metadata about your files that a Mac pays attention to and a Windoze box doesn't. So when you write Mac files to a DOS volume, that metadata — which is part of each Mac file — is simply discarded, causing the last-mod date to change.
    Message was edited by: eww

  • In Lightroom CC images look different in Library and Develop modules. After output, images do not appear as they do in Develop.

    As above.

    Mac OS X 10.9.5 has a color management bug that can lead to colors appearing different in Develop and Library: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" . See also: Jao's photo blog: Further quantification of the Mavericks color management problem and Jao's photo blog: Color management in Safari is broken in Mavericks too. Sorry for all the links to my blog, but this bug really annoys me and it bugs me that it hasn't been fixed all these months that Mavericks has been out. This can lead to color shifts especially in the deep tones. You can sometimes work around it by turning on soft proofing and proofing to adobeRGB or sRGB. Adobe could fix this but they haven't so far. Apple could fix it too, but they haven't until now. They fixed some code that lead to Aperture working correctly but Lightroom still has the problem.

  • Image appears different in Library and Develop modes?

    I have an image that appears different depending on whether it is in the Library Module or the Develop Module. Only this one image does this. The develop module version is the one I want to work on in Photoshop. However, when I click on "Edit in Adobe Photoshop CS3" the resulting tiff that opens in PS has an appearance that matches that of the Library module version of the image. It makes no difference whether I click on "Edit in PS CS3" from the Library or Develop module, the tiff always matches the Library Module version of the raw file.
    Any ideas what might be causing this?
    Thanks.
    J.

    How are you calibrating your monitor? The only real difference between the Library and develop module is that the Library module shows a preview that is generally stored in the adobeRGB color space. The Develop module uses a color space based on prophotoRGB primaries and can encompass any color your camera can capture. It is possible that your green falls outside of adobeRGB and gets clipped in the library preview, while in the develop module it shows them. This is only possible to see if you have a wide gamut monitor, or when your calibration software generates a perceptual rendering intent. If you export and you do not use the prophotoRGB color space, you will loose these colors.

  • Why does the color and or tone of my image change?

    Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

    Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
    One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

  • Why does dragging on a Touch Screen change the cursor into a Hand Tool?

    Why does dragging on a Touch Screen change the cursor into a Hand Tool? This did not happen in CS 5.5 and I could edit on my touch screen monitor. With Photoshop CS 6, as soon as I start to drag, the cursor changes to a hand cursor. I have look at all of the system options and nothing seems to affect it so I have to assume it is something wrong with Photoshop CS 6.

    Try staying with it for a while.  It is much nicer panning that way.  Give it a flick, and touch the screen again when in the right position. 
    I think it came in with CS4 BTW, but it makes a lot of sense keeping it on the Touch version.

  • How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landsca

    In Muse: How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landscape

    There is no way that Muse would automatically rotate the images. What you can instruct Muse to do is whether you want to show all image content and leave blank space in either direction OR scale the image to fill the frame resulting in some cropping, but filling the otherwise blank space.
    The options are Fit Content Proportionally and Fill Frame Proportionally respectively.
    Cheers,
    Vikas

  • Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

    My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

    I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
    I just updated to the most current version of AE.
    I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
    Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

  • Mac, second monitor changes to canvas background when I switch between full screen apps on my mac display?

    When I plug in my monitor using a thunderbolt to hdmi cable I would like to use my moitor as a second display, which i can do, but then when i switch between full screen apps on my mac it changes what i have on my monitor to a canvas background. Is there a way to fix the display on my monitor so that it will always be accesable?

    Apple:
    This is how it "Should" work.
    Each display should be treated as it own desktop.  If you swipe on a desktop it should swipe through the hidden screens/displays.   If your a user with multi displays connected to your Mac, you could have "Full Screen" Apps, Dashboard, Mission Control, and etc available to swipe on each of your connected displays.
    Display 1...swipe, swipe... mouse over to Display 2...   swipe swipe swipe...  oh.. Display 3, swipe!  All set for work or play!
    This would be a well received "Feature" for the Worlds Most Advanced Operating System.
    Cheers
    I have seen apps (like MPlayerX and VLC) have their own "built in" workaround for the full-screen problems on multi-displays.

  • Today, when using the full screen mode, when I switch out of it, its automatically returning to full screen mode one second later.  And ideas?

    Lightroom is acting up today.   If I enter the fullscreen mode to view images, when I try to exit out of it back to the library or develop mode, after one second its returning back to the full screen mode.  The only way to exit is to command Q.  Any ideas?

    Found this on another thread.  Havent tried it yet, but am about to.
    4. Re: lightroom 5.4 gets stuck in full screen preview?
    mohammedabidally Jun 1, 2014 10:53 PM (in response to freophotos)
    Hi ye I followed the procedure given here https://forums.adobe.com/inbox?objectType=2&objectID=6355272 and it worked for me.
    You need to do it with the cursor.....
    "restarted Lightroom then using the menu with cursor only (NOT THE F KEY) I went to window …. Screen mode….. and tried the various modes.. Screen Mode with Menu…..Full Screen…. then the Full Screen Preview (this is was my issue)    Once in Full Screen Preview I got out of it using the escape key which worked…. Then I hit the F-Key which again took it into Full Screen Preview then I tried the F-key to get out and it worked!!…..   "

  • Why didn't my iCloud account name change when I changed my Apple ID?

    Why didn't my iCloud account name change when I changed my Apple ID (because I got a new email address)?

    It doesn't change on your device automatically.  To change the iCloud ID on an iOS device you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
    To change the ID on your Mac, go to System Preferences>iCloud, sign out, then sign back in with the new ID.

  • Why is the TERMS and CONDITIONS safari link in the downloads tab under iTunes?

    Why is the TERMS and CONDITIONS safari link in the downloads tab under iTunes?
    Please remove it because its a useless place for it and its confusing for customers

    It is there so you can see the terms and conditions.
    Tap another button if you do not want to see it.

  • In FCE why is the video and audio separating

    all of a sudden why is the audio and video splitting when I drop the clip in the time line in FCE HD

    Hi
    Yes it does to me too.
    So I add video/audio cilps to the very end of TimeLine (right hand)
    then move it into place.
    Crude - Yes - But still it works
    Yours Bengt W

  • HT4528 Why is the WiFi and browser so slow on iPhone 5?

    Why is the WiFi and browser so slow on iPhone 5?  I've noticed they are not as quick as other smart phones and have seen this brought up in forums.  Also, the WiFi was slow with my iPhone 4 anyone know what the deal is?
    Thanks in advance

    Sadly that spiffy reply was of no use.  Browser is so slow and in looking at 3 different iPhones I have noticed there is a serious wait for any simple page to come up like MSN maybe its the iOS maybe Safari maybe should reset daily.  Truly not impressed Apple can you here us now?  Probably not... to busy restarting or resetting.
    Truly hope it improves in a hurry.

Maybe you are looking for