Why is the internet slower after udating?

After updating Firefox my internet has become slower. Does this improve over time or is there something that I can do to fix this?

Looking at your adsl stats, your sync rate is at (the speed in which your router/homehub is connected to the exchange)
Up Stream
448 (Kbps.)
Down Stream
7616 (Kbps.)
Meaning that your router is connected with a speed of 7.4mb
However your IP Profile is currently at 2mb, as your in a 10 day stabilisation period which means that the exchange is currently finding the right speed for your line and your IP profile should increase during this time.
If you would like to contact the BT Care Team who are a UK based BT specialist Team then see the link in Keith's post.
Please remeber to keep your router/homehub connected 24/7 otherwise problems can occur.
From your line Attenuation of 41dB this gives an estimated line distance of 3km.
cheers
I'm no expert, so please correct me if I'm wrong

Similar Messages

Why is my internet SLOWER after moving to ADSLmax

Hi,
Ive just noticed that my move to ADSLmax has been completed. Before I go any further, I MUST stress, I do not have a home hub, so asking for statistics from said homehub will be wasting time.
Ive just ran a bt speed test with the following result
Download speedachieved during the test was - 1.7 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :7.62 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
Is there any reason why my IP profile is STILL set at 2 megs? This is really and truly the slowest my internet has been.
I have NOT reset my router since sunday when I had a day of area related issues.
Router stats are as follows:
Status:
Configured
Current
Line Status
SHOWTIME
Link Type
Fast Path
[Go Top]
Data Rate:
Stream Type
Actual Data Rate
Up Stream
448 (Kbps.)
Down Stream
7616 (Kbps.)
[Go Top]
Operation Data / Defect Indication:
Operation Data
Operation Data
Upstream
Downstream
Noise Margin
8 dB
23 dB
Attenuation
41 dB
--- dB
Defect Indication
Indicator Name
Near End Indicator
Far End Indicator
Fast Path FEC Correction
0
0
Interleaved Path FEC Correc
6
0
Fast Path CRC Error
0
0
Interleaved Path CRC Error
2
0
Loss of Signal Defect
0
0
Fast Path HEC Error
0
0
Interleaved Path HEC Error
0
0
[Go Top]
Statistics:
Received Cells
3127991
Transmitted Cells
2946371

Looking at your adsl stats, your sync rate is at (the speed in which your router/homehub is connected to the exchange)
Up Stream
448 (Kbps.)
Down Stream
7616 (Kbps.)
Meaning that your router is connected with a speed of 7.4mb
However your IP Profile is currently at 2mb, as your in a 10 day stabilisation period which means that the exchange is currently finding the right speed for your line and your IP profile should increase during this time.
If you would like to contact the BT Care Team who are a UK based BT specialist Team then see the link in Keith's post.
Please remeber to keep your router/homehub connected 24/7 otherwise problems can occur.
From your line Attenuation of 41dB this gives an estimated line distance of 3km.
cheers
I'm no expert, so please correct me if I'm wrong

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems.

Can't connect to the internet right after boot up

Hey guys, I have an interesting problem in which if I try to use internet right after boot up (via scripts) I can't resolve host names. However, if I try to use the internet right after boot up manually I can resolve host names. I had this problem with a script but I've since rewrote it to work around the problem; however I now seem to have this problem with openVPN and I need this to work. I'll use openVPN as my primary example but the situation was the same for my script.
Basically, openVPN starts up via systemd and it can't resolve my server's host name. Even 18 hours later. I have 'resolv-retry infinite' in my conf file which as I understand says 'if you can't resolve the host name keep trying to resolve it indefinitely'. I left my computer on overnight and openVPN still could not connect to my server, despite me being able to ping it, have MySQL get data dumps and replicate from it and other software being able to resolve the server's host name. If I restart openVPN, then it works! I rebooted the computer and let it try for a few minutes to connect and it couldn't. I restarted openVPN manually and it resolved the server's host name, 5 minutes after the computer booted up even though it couldn't connect on it's own the previous night.
Here's openVPN's status as of this post:
[email protected] - OpenVPN connection to client
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: active (running) since Thu 2013-05-02 14:10:02 MDT; 58min ago
Process: 248 ExecStart=/usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/%i.conf --daemon openvpn@%i (code=exited, status=0/SUCCESS)
Main PID: 254 (openvpn)
CGroup: name=systemd:/system/[email protected]/client
ââ254 /usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/client.conf --daemon openvpn@client
May 02 15:07:52 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:07:57 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:02 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:07 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:12 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:17 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:22 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:27 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:32 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
May 02 15:08:37 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
Here is my conf file:
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote my.server.com 1194
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
user nobody
group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert host.crt
key host.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
Anyone have any idea what could be going on? It seems to me that when a program starts up it takes a snap shot of the current network status and it then uses it, even if it's 10 minutes later and the network has been fully loaded/configured, the program uses that snap shot and can't connect to the DNS.
Last edited by anEveryDayGuy (2013-05-02 21:20:47)

'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

Click here and follow the instructions.
(72059)

Why all the errors appear after some hours on pc

Why all the errors appear after some hours on pc

Thanks for reply but the 2 HDD oki think the PS is 200 W that made that problem ?Or from TEMP ? i made it more able to flow the air & become better now

HT1338 why would the internet be so slow?

The internet is running slow on the computer....not opening as quickly and won't stream any media when I need to what could be slowing it down and is there a way to fix it? I haven't had the computer for that long.

In the Sustem/Network/Advanced/DNS preference pane check to see what DNS servers you're using. If it's not one of the two below delete those that are there and add both of the two below. See if that improves performance. Note what servers were there in case you want to go back to them.
208.67.222.222
208.67.220.220
OT

Computer navigates the internet slower--A recent problem

I've recently developed a problem with certain websites after installing Norton Firewall and Virus Protection. The problem is that some website do not come up (I've noticed these to be graphic-intensive web sites) or will actually boot me off the internet (external cable modem). Before the install I simply used Norton's Anti-Virus, and it gave me no problems; but upon renewal of this software I went ahead and downloaded Firewall--you know, to make my compy extra safe.
Since the problem developed I've turned the settings of the firewall off completely and am now running just the Anti-Virus software. It hasn't helped at all. I should note here that I've noticed advertisements rarely come up anymore. Sometimes I will only get an HTML code where the ad should be.
Thanks for your help.
iMac Mac OS X (10.3.9) 600 Mhz PowerPC G3

Hello and Welcome to Apple Discussions.
Whilst I do not wish to be unhelpful many(most?) Mac users use the robust free Firewall that is included with OS X (System Prefences > Sharing pane) so there won't be a great deal of experience here (I'm sure someone will correct me now ).
May I suggest that you use Symantec's free online support available here. They've taken your money and slowed your machine up so they must be in a position to assist you.
Norton branded products never get good press on these forums - because of this type of problem (and worse)!
To keep your computer safe ensure that you regularly check Apple Menu > Software Update for security patches. Apple regularly releases these updates to patch flaws where the (zero known of) Mac virsues could enter your system by.
regards
mrtotes

Why is the internet faster on my 3-year-old Macbook Pro than on my iPad???

Though I love my iPad, I am puzzled why surfing the web is so much slower on the iPad than on my three-year-old MacBook Pro. I have a cable modem and an airport extreme. Loading the same pages on Safari, the MacBook is much faster than the iPad. Is this normal? Could something be slowing down the connection to the iPad?
Thanks!
Steven

Even a 3 year old MacBook has 4 times the CPU power and about ten times the RAM of an iPad.
You can run speed tests on the iPad and make sure that you don't have a connection problem.

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

Airport won't connect to the internet anymore after unusual reset

About a month ago, I was using my Mac normally.
Then one time when I had it on, it just resetted by itself. I don't know how. I don't know why, but it resetted. It turned off by itsel. Anyway. I turned it back on, and then I found out I could no longer get Airport to connect to the internet.
I then got a message that said "Your internal clock has reset, this may cause some programs to behave eratically".
Ever since I haven't been able to connect to the internet, but I have reset all of my clocks back to normal.
Sometimes 3 Bars from my internet connection show up when I start up the Mac but then my internet says connection error.
Afterwards, the three bars go away and my Airport says "!" .... and it picks up no internet connection even when my routers are on. I'm using another computer at the moment and it can connect to the internet successfully.
So I believe it is a problem with Airport.
What should I do to get my internet connected again, even though it already works? My Mac works fine otherwise !

I have a similar problem. I am using a Level One Home Plug (PLI-2030) bridge to connect to the network. Connecting directly to the computer works fine, but the computer will not connect to the internet through the wireless network. The wireless connection to the Airport Express base station is working fine. I have pingged the gateway and the connection is OK. The settings are as per those supplied, but the "Network Settings" on Network Diagonistics fails. Any Ideas?

TS1398 Why does the internet connection appear to be offline with stronger WiFi signal?

I purchased new iPAD 3 generations 32 GB last Monday so i did click iCloud on left side to open the page but it
indicated "Verification Failed - the internet connection appears to be offline" at home while WiFi icon shows stronger
but problem with the internet connection being offline at home
I have no problem with my home computer and wireless printer - both still working good but I don't understand what's problem
with my new iPAD after creating new iCloud account outside home such as McDonald or Starbuck - internet connection appears to be online
I have Verzion High Speed DSL and router DLink Model DES-1105.
Please advise.
Janice Lemanski
Serial DYTHPBLEDJ8R
Model A 1416 32 GB
I

You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why is adobe reader slow after installing windows 8

My adobe reader is very slow after upgrading to windows 8

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

After updating to Firefox 3.6.15, Firefox will not connect to the Internet, even after uninstalling and re-installing Firefox in my Windows XP environment.

After downloading the Firefox 3.6.15 update, my problems began. Firefox would not connect to the Internet. When I rebooted my PC, Firefox said that it couldn't access any Web sites. I uninstalled Firefox, then downloaded and installed Firefox 3.6.15. I still have the same problem: Firefox will not connect to the Internet. I am running Windows XP, service pack 3. I never had problems with Firefox until I installed version 3.6.15.

I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

Why is the internet slower after udating?

Similar Messages

Maybe you are looking for