Why is the Ken Burns effect not responding to individual slide settings?

First try creating a slide show in iPhoto'11 (I've used previous versions on older Macs w no probs). Ken Burns eff for individual slide is no longer responding for ex when I try to set a time for slide or any other option for that matter. It seemed to work OK when I first tried it but then the KB screen went 'dead' for individual settings. Any ideas on what to do?

Yeah I misread part of your post but am happy to have helped in some way.
dekezib wrote:
I did read a previous post that helped: to activate the KB effect, click, grab and move the pic. It worked.
Dan
Strange. That does sound like some sort of bug, though. I wonder how the poster figured that little fix out?
Thanks for the star
Rick

Similar Messages

Why is ken burns effect not working on individual slides I have amended when sent to iDVD

When making a slideshow in iPhoto, I changed the zoom and scan on individual slides as instructed in the Help dialog; these showed perfectly when played. However, when I shared the slideshow to iDVD, those particular slides were just 'still' and there was no Ken Burns effect at all. Why did this happen?

The Slideshow was created in iPhoto and then shared to iDVD. The Ken Burns effect works on all the photos that used the basic "Ken Burns' setting. However, on some of the photos I tried to amend the scanning to zoom into particular faces or parts of the photo. When I played the slideshow in iPhoto, these amended photos were exactly as I wanted, but after 'sharing' it and viewing it in iDVD, those photos I had altered were 'frozen' and the Ken Burns effect did not work at all, neither the automatic version, nor the specific way I had set it. All the other photos still had the Ken Burns effect as expected. I am using iPhoto 11, 9.1.5, I haven't had this problem in the past.
If you have any ideas why this should have happened I'd be grateful.
Thanks

Why is the Ken Burns icon not present with the crop option on imovie10

I do not have a tab labeled Ken Burns after I enter the crop mode with imovie10.

The Ken Burns and other options will show up when you have a project defined and select a clip in the "timeline" of the project.
HtH
Ben

When i create a slideshow in iphoto using the ken burns effect it will not work in idvd. any tips please.

when i create a slideshow in iphoto with the ken burns effect it works fine. when i then transfer it to idvd it will not work. any tips please.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
how are you getting the slideshow into iDVD?
what size slideshow did you send to iDVD?
can you export the slideshow to the Desktop and play it with Quicktime Player there?
what fixes have you tried?
how much free space on your boot drive?
Here's how you should create and sent a slideshow to iDVD from iPhoto:
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

How do I turn OFF the Ken Burns effect in slideshows--it defaults there no matter if selected or not.

The Ken Burns zoom and pan appears on every slide in every slide show - despite the Ken Burns box NOT ever being checked.
Any ideas ? Thanks.

Thanks, Leonie. I didn't realize that slideshows had themes - but nevermind. While searching for it, I found the settings control that I had overlooked (or had been hidden) before. It fixed the problem. Appreciate your help.
Arnie

Selecting photo then clicking "Fit" does NOT turn off the Ken Burns effect.

Trying to wean from iMovieHD. I'm having trouble mastering what seems to be more limited Ken Burns effect functionality in iMovie11. I don't seem to have the range, say, left-to-right, as I did in either iPhoto or in iMovie HD.
So, I figured for now I'd turn off the Ken Burns effect on all the stills in this project. I've tried selecting one photo, getting into the Fit/Crop/KB effect viewer, then clicking Fit, then Done. But the photo keeps the KB effect that had been applied to it.
I tried changing all photos in Preferences and that didn't change anything either.
Hopefully I'm just missing something? Thanks for any help, everybody...

Nevermind. Got it. As I'd hoped, user error.

Using the Ken Burns effect in I Photo 5

The first time I worked on a slide show I was able to use the Ken Burns effect with no problems. Later on opening I Photo and clicking on slide show I no longer have the controls for the Ken Burns effect. There is just a blank space where they should be. Why did this happen ? How do I get the controls back?
Any suggestions would be appreciated. Thanks, Vernon

Vernon:
Welcome to the Apple Discussions. What may have happened is that one or more items within the iPhoto application package have had their permissions changed so you do not have access. Run Disk Utility and repair disk permissions. If that doesn't help try moving the application to the desktop and making a duplicate of it-select it and type Command-D. Now move the duplicated to the applications folder and rename to just iPhoto. Now see if the KB controls come back.
Next would be a reinstallation of iPhoto. You'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Now reinstall iPhoto 5 and immediately update to the latest version. Then repair disk permissions.
Hope this has been of some help. Good luck.
OT

Can't get rid of the Ken Burns Effect!!

Not sure why, but when choose Show Photo info when working on the clips in iMovieHD, in Preview, I don't see the photo. It's just black. I also can not get rid of the Ken Burns Effect. I click the X so it won't be applied to the photos, but it does it anyway. This is becoming very frustrating. Is there some sort of bug that's causing it to do this? I started over several times seeing if that would help, but it hasn't. Any suggestions??

Cathy,
that yellow star, you gave Sue were the last 5 points to make her an honorable
LEVEL 4
forum member...
CONGRATS, SDILLINI!
hooray... ;-)))))
from the working pits down here in Level3....
(probably, she doesn't hear me, hanging out with the other Big Boys in The L4 Lounge...)

Cant turn off the ken burns effect

The ken burns effect (why is that on by default for crissakes?) cannot be tuned off!!!! I have about 10 images in a movie made up of about 100 still images on which the ken burns effect cannot be turned off. I tried unchecking the ken burns check box & hitting the update button, but it immediately turns itself back on!! Tis is with iMovie 3, and as i said, it affects only the first 10 or so images in this particular project.

I know, sometimes it feels like Ken Burns has a mind of its own. It WILL do what you want, but first you have to figure out its rules.
The most important is that all of the Ken Burns settings, the KB checkbox, zoom, pan and duration are controlled by the LAST imported clip you made, or a previously-imported clip you clicked on. THAT's what sets the default setting for your next import(s). (A very nice feature, by the way, for it lets you apply the Ken Burns settings of one clip to the next photos you import. You don't have to reconfigure settings each time.)
That also means that when you uncheck the KB checkbox that won't "stick". When you click on some other clip it may change.
So when updating an existing clip, the trick is to select the clip, THEN adjust the Ken Burns settings, THEN Update the clip.
A complicating factor is that previously-imported photos to which special effects or other editing has been applied are no longer considered Ken Burns clips, so clicking on them doesn't have the same result.
So pay close attention to what you click on, and even closer attention to whether or not there is a clip selected or an image selected in the Photos pane selected. iMovie will select a photo on its own when you haven't selected something.
It works like you want, but first you have to see that what it does is you want.
Karl

Stills using the Ken Burns effects are bad quality

The high quality still I'm inserting into the timeline using the Ken Burns effects are bad quality. Do you know why? I don't have that problem in iMovie.

Yes, I have rendered it (I think). Not sure how to do that and don't know how to get the "complete specs" of the still image and project.

"Ken Burns effect" not working properly

Whenever I try to add a still photo to an iMovie 6 project, i get an error chirp and then nothing ends up in the timeline. Often, if I turn off the ken Burns Effect, it imports fine.
Do I need to reinstall? If so, won't that mess up the iLife '09 software already installed? And will it mean that I have to reinstall all my Slick Effects?
Anybody know the answers to these questions?
Thanks in advance.

As Rich839 writes.
My list in another way of putting it
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. *com.apple.iMovie.plist *
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

IMovie HD6 Ken Burns Effect Not working

Hi. I've been using iMovie HD6 with my old iMacG4. We used Ken Burns Effect a lot with no problems.
I just got a 1 year old G5 iMAC with Intel Dual Processor and it has the latest versions of Tiger and iMovie 06. Everything works but the Ken Burns Effect. When I use the Ken Burns effect, it shows up when I set it up but when I push the button to make iMovie render the effect, the clinic does not render. It looks like the computer is about to render the effect but nothing happens and I need to force quit iMovie to do anything else. On the set-up of the Ken Burns effect, the preview shows the Ken Burns effect working.
I had a previous version of iLife O6 so I tried deleting the iMovie from the application and reloading the iLife 06 but this did not help. Because I don't have iLife 08, I cannot download a version of iMovie O6 to give this a try.
Any suggestions?
Thanks for your help, Andy

Since you just got a one year old computer, I would do the following:
1. Close iMovie and trash the file com.apple.iMovie.plist located in User/Library/Preferences. iMovie will create a new .plist file on relaunch.
2. Before you relaunch iMovie, do a permissions repair using the Disk Utility app on your Mac.
3. Make sure that you have sufficient free disk space for iMovie to operate efficiently -- 25GB is recommended.
4. Update iMovie and Quicktime to current versions, and do a permissions repair afterwards.
5. If you have any 3rd party plug-ins, or Quicktime plug-ins, move them to another folder to temporarily disable them.
With the Ken Burns effect, do not empty the trash until your project is finished. Emptying the trash will cause you to be unable to edit a photo to which the Ken Burns effect has been applied.
Hope the above helps.

Ken Burns Effect not working as expected.

Hi,
I have created a slideshow in iPhoto 08 and want to have all of the slides use the ken burns effect except the first one (i want this to be a 20 second title photo). To get this to work, i have disabled the Automatic Ken Burns effect in the settings menu and then clicked the Ken Burns checkbox in all of the photos from the second one onwards. Even with these checkboxes selected, the photos just stay still and the ken burns effect does not work. Am i going about this the wrong way?
Any ideas appreciated.
Joe.

I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
Try that first (it is easier )
LN

How do I get the Ken Burns Effect?

How in FCE do I achieve the Ken Burns effect which I used a lot in iMovie '08?

Hello Piero,
Thank-you for your contribution. Your plug-in comes in very handy as I have decided to drop producing slideshows using iPhoto after it lost my slide show project. So many hours of work down the drain!
Anyhow, here I am looking for the quickest way to get similar results using FCE and I find your plugin. As I am getting familiar with FCE I want ahead with a trial of your plugin. My only question at this stage is what could cause the pf folder not to show up in the Video generators? The pf folder does show in the Video filters but not the Genrator filter.
I did follow your instructions with care at:
http://web.mac.com/piero.fiorani/PieroFFCE_Effect/PluginsInstallation.html
but still cannot figure out the cause.
Thanks for your help,
JM

Why is the Ken Burns effect not responding to individual slide settings?

Similar Messages

Maybe you are looking for