Why is the Last synced time: 1/1/1601 12:00:00 AM

I'm doing a cutover migration from Exchange 2003. When I check the migration batch statistics, the "Last synced time" is always 1/1/1601 12:00:00 AM
I can't determine what this means, or why it is like that. I want to ensure that the last sync is completed before deleting the migration batch.
Any ideas?
Aain Ramcharan Technology Alliance Inc.

I didn't let it stop my migration, though, as syncing is supposed to happen every 24 hours.
The best thing for me, whenever there was an error, was to Stop, Wait 10 minutes, and Start the migration, again.
Good luck.

Similar Messages

I have an issue syncing my iPhone 4 with itunes. This has only happened the last few times i have tried but don't know how to resolve it. Please help.

Hi, the last few times i have tried to sync my iPhone 4 to my itunes it won't work. I plug my phone into my computer, to sync any new pictures i have taken or add my new music i have bought on my phone, and hit sync. It appears to start syncing then an error message appears saying the following:
The iPhone 'my iPhone' cannot be synced. You do not have enough access privileges for this operation.
I'm not sure what this means or why this keeps happening. I have the latest iTunes and i have not done anything different. It appears to have wiped some of my music from my iPhone and a number of my photo albums off. Please can someone help or advise how i resolve this issue. Thanks.

When you set up iOS7 the second screen specifically asks that you create a four digit code .
That's what you now need to re-enter in your phone.
Once entered you can go to system/general/Passcode lock
Re-enter the same code and choose turn Passcode off
iOS 7 has been designed to enforce minimum passcode security by default or in the case of the new 5s use of finger print level security.

When I close Firefox I choose Save and Quit to save my tabs for next opening. It's not saving them the last few times, wondering why?

Upon closing Firefox it asks me if I'd like to save and quit, quit, or cancel. I always choose save and quit. I've noticed the last few times that my tabs were not saved the next time I opened Firefox, I'm wondering why. I've lost some webpages I was saving for later now, because of this.

The computer crashes, due to power failure, with Firefox running. After rebooting, Firefox has lost record of tabs. [History/Recently Closed Windows] is grayed out. So the list of tabs is lost. It should be possible for the software to keep a periodic backup of current tabs, such as, e.g., MS Word makes backups of the current file every 10 minutes, so that the tabs can be restored if the software does not make a normal exit due to a computer crash.

My IPhone, after synching the last few times, has inherited both my husband and my daughter's music libraries. How do I un do this?

My IPhone, after synching the last few times, has inherited both my husband and my daughter's music libraries. How do I un-do this and keep this from happening in the future?

1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
iOS and iPod: Syncing photos using iTunes
2)
Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then on the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Contnue to use the commpn ID/account for Settings>iTunes and App stores.

Sql statement for retrieving the last update time of a table

Hello all,
Can somebody give me an example of sql statement for retrieving the last update time of an oracle table.
Thank you
Il

Thanks for the fast replies. It works great when I test it as a sql statement but when trying to populate a datalist with it it raises the following exception:
Exception Details: System.ArgumentException: SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN is neither a DataColumn nor a DataRelation for table DefaultView
Part of the Datalist Code:
ItemTemplate>
Line 12:             SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN)):
Line 13:             <asp:Label ID="SCN_TO_TIMESTAMP_MAX_ORA_ROWSCN__Label" runat="server" Text='<%# Eval("[SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN))]") %>'>
Line 14:             </asp:Label><br/>
Line 15:             <br/>
{code}
Why is this happening? Any ideas?
Il

How to recover the last sync at iCloud

Yesterday I had sync my iphone 4 as usal and today I erase one picture from the Iphone 4 so I want to recover my Iphone with the last sync but in my computer the last sync is one week ago so when i restore my Iphone seem as that day, but i already know that in icloud should appears one sync from yesterday so How could done for restore my iphone to the last sync that was yesterday??

Excuse me, first of all for this time of “failure to reply” but I have to deal with another problem.
In fact I have 2 files orders (1 heading, 1 detail):
- COM_COMMANDES = heading,
- COM_COMMANDES_LIGNES = D2TAIL,
COM_COMMANDES_LIGNES depends on COM_COMMANDES.
When I make an INSERT INTO in COM_COMMANDES, it makes me creation well.
On the other hand, when I make an INSERT INTO in COM_COMMANDES_LIGNES, it creates me a recording BUT not with the identifying good (that created in COM_COMMANDES).
Result: I have well the order copied but without the lines.
Thank you to help me because I do not manage to regulate this problem.
Olivier

Itunes it's not showing me the last date/time the iPhone/iPad was backed up.

I just backed up my iPhone and iPad but iTunes it's not showing me the last date/time my device was backed up. I had just done a backup about 3 hours ago. And when I go to check the backup location I see a folder there with the time it was last backed up. But it's not showing me the backup date in iTunes. I don't know what to do.
I already tried to remove the folder in App. Support-Mobile Sync and start a brand new backup. But no date.
Tried to delete and start a new iTunes folder in Music but nothing has changed
Any solution is welcome!

iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
Mavericks requirements are shown here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can purchase an upgrade from the Mac App Store. If you can only run Lion or Mountain Lion, contact the online store in your country and purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

Why is the last item not displayed ?

Hi !
I can understand why this the last episode of this feed is not displayed in itunes website (or itunes store in the app),
http://xclusivesession.universpodcast.com/feed/
What is really strange is that there is no problem at all when user subscribe in Itunes. I have many other feed built like that which work without any problem.
To finish here is a screenshot showing the list on iTunes website starting at index 2
Thank you so much for your help !

This looks like a version of a bug in the Store which happens from time to time for some podcasts. Usually the entire list of episodes fails to show though the Store claims to be showing the correct number. Here you will notice that below the list it says '34 items' but it starts numbering at 2. I'm afraid there isn't anything you can do about this - your feed appears to be OK - it will probably sort itself out the next time the Store checks the feed.

Since I updated my itunes the last two times my computer and my ipad will hardly communicate. I have a Toshiba Satelite with 32 bit os

I have a Toshiba Satelite with a 32 bit os and since I updated my itunes the last tow times the ipad and computer will barely communicate. Many time itunes will just lock up. any suggestions?

If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
Then you can run the latest iTunes to sync your iPad running iOS 6
You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

TS1347 My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

My Outlook Contacts/calendars (running on an iMac) never sync properly with my iPhone, and now on the last sync 90% of the contact information on my iPhone has been deleted. Any ideas?

Are these the instructions you followed:
http://support.apple.com/kb/ht1670

Need to know how to find the last execution time for a function module

HI all
I need to know
1) How to find out the last execution time of the function module ?
say for eg. I have executed a func. module at 1:39pm. How to retrieve this time (1:39pm)
2) I have created 3 billing document in tcode VF01 i.e 3 billing doucment no. would be created in SAP TABLE "VBRP" b/w 12am to 12:30 am.
How to capture the latest SAP database update b/w time intervals?
3) Suppose I am downloading TXT file using "GUI_DOWNLOAD" and say in 20th record some error has happened. I can capture the error using the exception.
Is it possible to run the program once again from 21st records ? All this will be running in background...
Kindly clarify....
Points will be rewarded
Thanks in advance

1.Use tcode STAT input as Tcode of Fm and execute .
2. See the billing documents are created in table VBRk header and there will always be Creation date and time.
VBRk-Erdat "date ., u can check the time field also
So now if u talk the date and time we can filter then display the records in intervals.
3. with an error exeption how is my txt download finished .
once exception is raised there will not be a download .
regards,
vijay

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

Min,Max for a time Range and Sum of Records for the last date/time

Hi All,
I have a table with the following structure/data:
create table Events   (
                                    [EventID]
int                   NOT NULL,
                                    [Title]
nvarchar(200) NOT NULL,
                                  [SourceName] nvarchar(20)   NOT NULL,
                                    [Type]
int                  NOT NULL,
                                    [eDate]
datetime
insert into Events values(100, 'Event 1', 'S01', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S07', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S08', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S09', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S010', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-03-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-03-01 00:00:00.000')
And I wrote the following query:
select EventID as [Event ID],
       Title,
       count(distinct(SourceName)) as [Instances],
       Type,
       min(eDate) as [First Detected],
       max(eDate) as [Last Detected],
       datediff(d,min(eDate),max(eDate)) as [Delta (days)]
from Events
where type = 3
group by EventID, Title, Type
having max(eDate) <> min(eDate)
   and max(eDate) =(select top 1 eDate from Events order by eDate desc)
and I get the following results (see the instance number)
Event ID Title         Instances Type First Detected                     Last Detected
   Delta (days)
=============================================================================================================================
100         Event 1         5         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000
59
101         Event 2
3         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000     59
102         Event 3
2         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000     59
This is normal for this query however what I need to do is a little different.
In other words, while I need to show when we recorded a specific event first and last time,
I need to display the results for the last date/time when it was recorded.
For example what I need to provide should look like this:
Event ID Title                Instances        Type      First Detected
Last Detected                         Delta (days)
=============================================================================================================================
100         Event 1            2                  3
2014-01-01 00:00:00.000     2014-03-01 00:00:00.000      59
101         Event 2            2                   3
2014-01-01 00:00:00.000     2014-03-01 00:00:00.000      59
102         Event 3
2                   3            2014-01-01 00:00:00.000     2014-03-01 00:00:00.000
59
Could you please help me to fix this query?
TIA,
John

;With cte As
(Select EventID as [Event ID],
Title,
SourceName,
Type,
min(eDate) Over(Partition By EventID, Title, Type) as [First Detected],
max(eDate) Over(Partition By EventID, Title, Type) as [Last Detected],
eDate,
datediff(d,min(eDate) Over(Partition By EventID, Title, Type),max(eDate) Over(Partition By EventID, Title, Type)) as [Delta (days)],
max(eDate) Over() As MaxEDate
from Events
where type = 3)
Select [Event ID],
Title,
COUNT(Distinct SourceName) As Instances,
Type,
[First Detected],
[Last Detected],
[Delta (days)]
From cte
Where eDate = MaxEDate And [First Detected] <> [Last Detected]
Group By [Event ID],
Title,
Type,
[First Detected],
[Last Detected],
[Delta (days)];
Tom
P.S. Thanks for providing the DDL and data. That is always very helpful.

Apple tv: Does anybody know why during the last few days itunes store did not actualize the podcasts?

Does anybody know why during the last days on apple tv the podcasts (itunes) are not actualized?

Does anybody know why during the last days on apple tv the podcasts (itunes) are not actualized?

How to check the last modified time of a file?

Does anyone know how to use LabVIEW to check the "last modified time" of a file?
Thanks.

This works just fine here (Windows XP, LabVIEW 8.5.1).
(Actually, if you look closely, it is off by one second. I guess the file properties dialog rounds in a different way )
Do you have more information? (e.g LabVIEW version, OS, etc.). Can you show us the code that fails?
Message Edited by altenbach on 06-27-2008 08:48 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
modified.png ‏33 KB

Why is the Last synced time: 1/1/1601 12:00:00 AM

Similar Messages

Maybe you are looking for