Why is the latest version not compatible with 'ALOT' when the previous one was?I am trying to get back to the old version but can't manage it

I have installed FF 5 & now wish I hadn't.
Ihave lost a very useful toolbar (alot)which was perfectly compatible with previous FF versions.
Inow need to get back to a version where I can reinstate my alot tb.There should have been an option to abort if a new version was going to be incompatible with other software.

Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

Similar Messages

Why is my iMac (G5) not compatible with mountain lion?

Why is my iMac (G5) not compatible with mountain lion? I have 4 GB ram (667) and around 90GB hard drive space.

Jewood20 wrote:
Why is my iMac (G5) not compatible with mountain lion? I have 4 GB ram (667) and around 90GB hard drive space.
iMac G5 can only be upgraded to 10.5.8.
If you have continuing use, you are among the lucky ones. I purchased many of these used from a company that shut down its American office. Many of these eventually suffered from the "bad capacitor" problem and required a motherboard replacement from Apple. I was lucky in that my local Genius bar approved these for no charge, even though Apple's extended warranty had expired.
My last one was my desktop Mac. It's power supply failed in 2010 and I paid for a replacement. In Summer 2011 when its HD failed, I decided it was time to move on and purchaed a Mac Mini, which I continue to run on Lion.

'The provider is not compatible with the version of Oracle client' exceptio

Hi
I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
what I need to do to run the application successfully on the machine where 10g server exists?
any help is appreciated.
thanks,
harry

Hi Harry,
I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
HTH
Jenny

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

CS5: Could not complete your request because the file is not compatible with this version of Photosh

After several hours creating a PSD file in Photoshop CS5 I attempted to revert some changes and got this error "Could not complete your request because the file is not compatible with this version of Photoshop".
I closed the file and restarted Photoshop and still get this error.
I restarted the computer and still get this error. Now my hours of work are WASTED!
This file was created using Photoshop CS5 Extended and was never in any other software.
Details:
Mac Photoshop CS5 (12.0 running in 32 bit mode)
File had a video layer (h.264)
MaxBook Pro 2.8Ghz
OSX 10.6.3

I was able to open the file in Photoshop CS2 and all layers were intact. PS CS2 gave me the message: "A layer is corrupt and will be discarded." Turns out that was the video layer. The file itself was fine and I am again working on it in PS CS5.
Which leads me to ask: If a video layer gets corrupted why can't PS CS5 open it?
PS CS2 had no problem opening the file, it just flatteded the video layer - it even kept the current key frame.
Additional info: Just before the file went bad I made a level adjustment to the video layer and set a keyframe in the animation panel. Then I saved and got the error "Could not complete your request because the file is not compatible with this version of Photosh' in Photoshop Macintosh". Also the source H.264 video file appears to be fine, it's only a 5 second clip and it play fine in every app - even PS CS5.

Could not complete your request because the file is not compatible with this version of Photosho

I just tried to open a file that I had saved last night and I got the message:
"Could not complete your request because the file is not compatible with this version of Photoshop."
Normally I would just chalk it up to a corrupt file and redo the project but I've had this happen to me 5 or 6 times in the past two weeks. I dont know what to do!
Things I've tried that haven't work:
Opening in ImageReady and Gimp, changing file extention to .tiff, dropping into photoshop as smart object, opening in Illustrator, re-installing photoshop, deleting old actions/plug-ins that might glitch up the system.
I just started a new job and I'm working on a 2.5GHz Mac Mini (OSX ver. 10.7.4) with Photoshop CS6 (16-bit).
I am NOT saving over a server or anything like that.
I did NOT close photoshop too quickly last night.
I do NOT have any Nortan Anti-virus anything.
I've spend hours reading up on this and every fix that I've found doesn't work.
I've been using photoshop for YEARS and I've NEVER had this problem before.
Please HELP!

There is a problem with the latest update, Mac, and saving a PSD file. Apparently it may not open in CS6, but will open in other versions. They are working on patch.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lot

The problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

E-mailed File "The project is not compatible with the current version of Premiere Elements"

I have Version 12 on a PC.
My friend has Version 12 on a MAC.
E-mailed him a file.
He could not open, and a message box popped up: "The project is not compatible with the current version of Premiere Elements".
Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
Thank you,
Ben
[email protected]

Ben
As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
Details
Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
That is a rough sketch of the situation. I can fine tune the details further if necessary.
Please review and consider.
Thanks.
ATR

The provider is not compatible with the version of Oracle client... again!

Please, please, please help me!
I get the error, "The provider is not compatible with the version of Oracle client", intermittently on my Test Server. Strangely, without restarting the server or IIS, my application suddenly decides that I don't have the right Oracle client. I don't have any such issue on my local machine even though I'm using the same Oracle 11g client from Beta 1.
I have Oracle 11g (D:\Oracle11g\product\11.1.0) installed. I tried specifying which assembly to use in my web.config:
<compilation debug="true" defaultLanguage="c#">
<assemblies>
<add assembly="Oracle.DataAccess, Version=2.111.5.10, Culture=neutral, PublicKeyToken=89b483f429c47342" />
</assemblies>
</compilation>
I'm not even trying to use a 10g client with the Providers as discussed here: "The provider is not compatible with the version of Oracle client"
What I don't understand is why this error comes and goes?!?! Has anyone experienced anything like this?

The server is Win 2003. The local development machine is WinXP.
...I was trying to wait to install Beta 2 because of the nasty bugs reported on this forum.
I'm now seeing that ORACLE_HOME wasn't set on my server because my co-worker removed the path. Somehow it was able to find an Oracle Home on the server, but apparently, it didn't always find the same home causing this error intermittently.
Now, my question is how can I get my application to use the 11g Client as its Oracle Home, while my co-worker can use 10g Client as his Oracle Home? To be a bit more specific, he needs to use an ODBC client to connect because his application uses Classic ASP.
Is this possible, or are we going to have to set up separate machines?
Bee

Error :"The provider is not compatible with the version of Oracle client"

Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
Anderson

Hi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

Could not complete your request because the file is not compatible with this version of photoshop

Hello,
I'm a beginner in PS. I was edit TIFF file in PS. Size of file is 21x89.1(22.6 MB). Then suddenly power - cuted. But after 5 min turn on PC and PS can't open my TIFF file.
Error is (could not complete your request because the file is not compatible with this version of photoshop)
What should I do, how I open this TIFF file? I realy need to open this file?
Please help me...
Regards, Suvd.S

Out of curiosity, were you actually saving the file at the moment the power cut off, or had you just saved it?
If not, I don't understand the reason the file should have become corrupted. If it was successfully saved on disk from the prior save operation, just shutting off the power on Photoshop would lose your current edits, but the file should still be intact.
-Noel

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

PSD error: "Could not complete your request because the file is not compatible with this version of Photoshop"

Help needed, encountered this error while opening psd file.
the psd file is created in CS5, tried to open it in CS3 because it said "...the file is not compatible with this version of Photoshop", i got the same error message in CS5
tried to open it at Firework CS6 (got the idea from Re: Recovering Crashed PSD file) but it give me error message "Could not open the file. An internal error occured"
is there any way to recover the file?
it's for my mid-semester score
thank you in advance

Hi gener7,
i've uploaded the file and sent you the link
thank you very much for the help.

Could not complete your request the file is not compatible with this version of Photoshop.

User has been working on a photoshop document for a whole day, when they came to open it the next day the were presented with the error message could not complete your request the file is not compatible with this version of Photoshop.
The file has been saved locally and hard drive and RAM are working as they should. Does anybody else have any idea to the cause of this problem. the file is 582MB in size. Any help would be greatly appreciated.

Sounds like it's corrupt.
Have you any backups or other versions?
http://windows.microsoft.com/en-ie/windows/previous-versions-files-faq#1TC=windows-7
OS X Mountain Lion: View and restore past versions of documents
This might help
http://hardcorerikki.deviantart.com/journal/Saving-your-corrupt-PSD-files-and-job-21415717 1

Why is the latest version not compatible with 'ALOT' when the previous one was?I am trying to get back to the old version but can't manage it

Similar Messages

Maybe you are looking for