Why is the letter p is not working on my iPhone 4s?

Using the keyboard, the letter "p" does work when the iPhone is held in the vertical position.

Does the area the p letter is located on work with touch when the keyboard is not there?

Similar Messages

The home button is not working on my iphone 5 - is there a way to troubleshoot that issue?

the home button is not working on my iphone 5, its does click and acts normal but doe not do what it is supposed to do

You have identified the problem. If you have Warranty or AppleCare coverage, make Genius reservation and take or send to Apple for resolution. Troubleshoot. When iPhone 5 is open, the home button contacts are present right there. With volt meter placed on home flex you can see if pressing home button completes the circuit. You can bridge the dock home button contacts and see if it actually causes response in the iPhone. If not dock or its contacts are faulty or logic board is faulty.

TS3682 The home button is not working on my iPhone 4? How do I fix it

The home button is not working on my iPhone 4? How do I fix this problem?

Make a Genius Bar appointment at your nearest Apple Store and do an out of warranty replacement for $149 USD, or use a third party repair site such as http://www.iresq.com, or replace it yourself, http://www.ifixit.com.

HT201407 The shake operation is not working on my iPhone, can anyone help me with it plz

The shake operation is not working on my iPhone, can anyone help me with it plz

All depnds what your using it for.. If it's an app, may be a delay in the app doing an update to be compaitible with iOS 6. If its for an Apple app, then you need to check the settings for that specific app.

The ringer setting is not working on my iPhone 4s

My iPhone fell into my pond for less than 10 secs. I pulled it out in time to dry it off and shake some of the water out. I made sure the screen was still working and sounds were functioning then I turned it off and left it in a bag or rice for 24 hrs. The next day I took it out and it was working fine. Now suddenly today, the ringer setting is not working. When I go into settings>sounds I press on ringtone and it seems to be working. Speakers are fine and when someone calls I have no problem. I can also hear the ringtones. But when someone txts me or when I get notifications it doesn't have any sound? The alarms don't work and the sounds in apps don't work. When I put the charger in, it doesn't make a sound. It vibrates only except when someone calls me... My headphone jack seems to be working fine because I can hear everything even the text tones and sounds in apps... What should I do? How much will I have to pay to get someone at apple to fix this problem? I'm assuming there is still some moisture in the phone maybe? It was working for a week until today I'm not planing to upgade to the iPhone 5 anytime soon. Btw, the volume buttons do work it's just when I press on it, it doesn't show the bars when you press up or down... it's just blank.

If it's physically stuck it might be best to bring it into the Apple store at George Street Sydney.
Set up an appointment with the Apple store via the website http://www.apple.com/au/support/contact/

The internet sharing is not working on my iPhone.

The internet sharing, from my iMac, is not working on my iPhone. It is connected at the beginning, but after a while (to be exact, 2 minutes!), the connection is lost. Can anyone helps me?
Thanks.

Try this one, it's really worked, http://www.appletips.nl/os-x-10-7-4-fix-voor-draadloos-netwerk-problemen-imac/ . I tried last night, and it's working. But you need to translate the page.
If you haven't sent the feedback yet, try to contact them. It's maybe good for Apple's user in the future. http://www.apple.com/feedback/macosx.html

Why does the address/status bar not work?

After updating to 9.0.1, my status bar will not work, or my address bar. If I try to type in anything and press enter into the address bar, nothing happens. Also, I cannot press forward or back as they always remain grayed out. The only way I can get to a website is by pressing home, which is thankfully google. I have to google the url to go to it.
Remembering now actually, I copied all the folders from the main firefox folder and pasted them into a new install of firefox (I had this problem actually before firefox updated). I was hoping that copying these folders would save my addons and etc. after I downloaded a new firefox and re-installed it. I put the folders back and firefox is still messed up :/
I just want it to work more Q_Q

That issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Why is the map in uae not working

hi
In UAE we face problems with maps. we can select one place but cannot go their (direction not working). Another this is Passbook doesn't work in UAE

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT201493 why is the notify me feature not work sometimes

some times the notify me feature is avalable for some ppl and othere not?

They have to update to ios6 for it to work all devices have to have ios6 to work with the new notify me to work.
You can tell if the button on your device is shaded out they need to update on there end.

Why in ios 6 the app store is not working in my iphone 4

App store is not working in my iPhone4 ios6.

Try PeterG15's suggestion here > https://discussions.apple.com/thread/4399412?tstart=0

The home button is not working on my iPhone 4

My home button has not been working for ages. It works about once every 10 clicks. It feels like it has something stuck under it. Please help! It is really annoying.

Method 1: Calibrate (and possibly restore)
If you're lucky, your slow-to-respond home button is due to a software glitch. To find out, you'll need to calibrate your home button. Here's how:
Open up a stock app, like the Clock. Hold down the sleep button until "Slide to power off" appears. When it does, let go of the sleep button and hold down the home button. After about 5-10 seconds, the app will close.
If this solved your problem, you are one lucky iPhone owner. If it didn't you may want to try restoring your iPhone before continuing to the second method.
Method 2: Realign the docking port
There is a chance that through normal wear and tear, your phone's docking port got misaligned, moving the home button along with it. Although a repair shop might suggest you replace the home button, this YouTuber offered a different solution.
Plug a USB cable into your iPhone. Then, gently push down on the 30-pin connector, so that it pushes up behind the home button. While you apply the pressure, click the home button. Remove the cable, and see if that fixed the problem.
Method 3: Clean the home button
A splash of soda, sticky hands, dirt in the bottom of your purse or pocket -- any of these things can damage your iPhone's home button.
For this fix, you'll need 98-99 percent isopropyl alcohol, which can be found at hardware stores. Using a cotton swab, eye dropper, or tissue, apply 2-3 drops of the isopropyl alcohol directly to the home button, avoiding the screen. Then, with a narrow, dull object (like the eraser on the back of a pencil), repeatedly tap the home button so that the alcohol seeps into the frame.
Wipe clean, and wait about 10-15 minutes before checking to see if that did the trick.
Method 4: Enable the on-screen home button
If the previous three methods did not work, it sounds like perhaps you have a completely defunct home button. In this case, your home button's connectors may have been misaligned and would require professional repair. (Or, if you're willing to brave it, iFixit shows you how to DIY.)
The good news is, you can still use your phone using its on-screen home button. Normally, this is used as an accessibility option, but it's also a common solution for those with non-functioning home buttons.
To enable the on-screen home button, go to Settings > General > Accessibility > Assistive Touch. Turn Assistive Touch on, and you'll see a small circle appear on screen.
Tapping that circle gives you four options: Home, Siri, More (for things like multitasking and playback controls), and Favorites. In your case, ignore Favorites, but tap this on-screen button whenever you need to access your home screen, activate Siri, or get all the options you'd normally see when you double-tap the home button.
If the on-screen home button ever gets in the way, simply tap and hold to drag it anywhere else along the frame of your screen.
It's hardly an ideal solution, but it'll hold you over until you're ready to purchase a new phone or get your current one fixed.
Youtbe: http://www.youtube.com/watch?feature=player_embedded&v=cflsmFSdcmI
Refer to Apple Support Page too! http://support.apple.com/kb/ht1414
All the best

The touch screen is not working on my iPhone 5c. I cannot unlock the screen

The touch screen on my iPhone 5c is not working I cannot even unlock my phone

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Why is the GROUP BY clause not working in my Query?

Dear All,
Below is the Query for a Summary Debtors Aged Analysis.
The GROUP BY clause does not seem to be working.
The Query returns all the unpaid invoices, instead of a single total row for each Customer.
If a Customer X has 10 unpaid invoices, 10 rows are displayed - one for each invoice.
I was expecting only 1 row for Customer X, 1 for Customer Y, etc.
This is what GROUP BY is supposed to do, but it is not doing its work.
What has gone wrong?
Thanks
Leon Lai
Here's my Query:
declare @taxdt datetime
set @taxdt
/*select 1 from jdt1 t0 where t0.TaxDate*/ = [%1]
SELECT
CASE
             WHEN T0.Account = 1220101 THEN 'Prim Cust'
             WHEN T0.Account = 1220102 THEN 'Fgn Cust'
             WHEN T0.Account = 1220103 THEN 'Local Cust'
             WHEN T0.Account = 1220104 THEN 'Staff Loan'
             WHEN T0.Account = 1220105 THEN 'Dep with TP'
             WHEN T0.Account = 1220106 THEN 'Adv to Cust'
             WHEN T0.Account = 1220108 THEN 'Sund Drs'
             ELSE 'Error ! ! !'
END AS 'Control A/c',
T1.CardCode AS 'BP Code',
T2.Notes2 AS 'BP Name',
SUM ((T0.Debit - T0.Credit)) AS 'Orig. Rs',
SUM ((T0.BalDueDeb - T0.BalDueCred)) AS 'Bal. Rs',
((SELECT SUM(T0.BalDueDeb) - Sum(T0.BalDueCred)
    WHERE DateDiff(mm, T0.TaxDate, @taxdt) = 1))
    AS '1 Mth Ago'
/* Similarly for other age brackets*/
FROM JDT1 T0
INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
LEFT OUTER JOIN OCPR T2 ON T1.CardCode = T2.Cardcode
LEFT OUTER JOIN OJDT T3 ON T0.TransID = T3.TransID
LEFT OUTER JOIN OINV T4 ON T3.TransID = T4.TransID
LEFT OUTER JOIN ORIN T5 ON T3.TransID = T5.TransID
WHERE
T1.CardType = 'C'
and (Balance) != 0
and (T0.BalDueDeb - T0.BalDueCred) != 0
GROUP BY T0.Account, T1.CardCode, T2.Notes2, T0.TaxDate

Dear Neetu,
Thanks for your reply.
This Query is a modification of the Query you posted in SAP B1 SQL TIPS & TRICKS
http://wiki.sdn.sap.com/wiki/display/B1/SAPB1SQLB-FNDebtorsAgingReportbydate
So, maybe instead of referring to my Query, let's refer to yours. It may be easier for you to understand me.
Once I understand the problem, I can adapt your query to suit my requirements
So, let's start with a clean slate:
The Query you have posted is for a DETAILED Debtors Aging Report.
This lists all outstanding invoices, and ages them in the Age Brackets.
What I want is a SUMMARY Debtors Aging Report.
This will give the total amount owed by each Customer, and this amount is broken down in the Age Bracket Columns
There will be a single row listed for each customer, something like this:
Customer     Total Due     Current      1 Mth          2 Mth         3 Mth etc
Alfred       500,000       300,000       200,000
Charles      800,000                     100,000       300,000       400,000
How can you modify your query to make it become a Summary Report (1 line for each customer even if he has many invoices)?
Thanks
Leon Lai
Here's your code
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
     CASE WHEN T0.TransType=13 THEN 'Invoice'
          WHEN T0.TransType=14 THEN 'Credit Note'
          WHEN T0.TransType=30 THEN 'Journal'
          WHEN T0.TransType=24 THEN 'Receipt'
          END AS 'Document Type',
     T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
     ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > [%1]) AND T0.RefDate <= [%1] AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1

Why is the Watch ESPN app not working?

All I get is that it is unavailable

Yep, same here...ESPN app on the Apple TV quit today May 26 for me. It just says 'not available, try again later'. Have not found the answer anywhere on the web. So I have to pull it up on the iPad ESPN app and send it to the Apple TV via Airplay. This works great, full screen picture just as sharp. So, uh, I guess I don't care if they fix it. Except I can't use the iPad for anything else while I am watching the tennis games in Paris this week. If I had to blame someone, I would select the blamee du jour. Vlad. Vlad is responsible for everything bad, everywhere.

Why is the a:visited style not working?

Hello. I have created a horizontal menu and would like the a:visited text and background colors to be the reverse of a:link. The a:link and the a:hover work well. But when I make the a: visited color and background color different from a:link, all of the links text turn black and the background turns white for all of them. The links were not cicked on. But when a link was clicked on, a thin border of the text color appears around the box surrounding the link that was clicked on. I would appreciate knowing how to correct this. I have included the following styling link information that is in the head and body of the the html and css documents :
html document:                                                                                css document:
ul {                                                                                                     .navigation {
    list-style-type: none;                                                                           width:   960px;
    text-align: right;                                                                                   height:    50px;
    padding-top: 6px;                                                                               margin-top: 50px;
    padding-bottom: 6px;                                                                         font-size: 18px;
                                                                                                                 z-index: 5
li {
    display: inline;
a:link {
    color:#FFF;
    text-decoration: none;
    background-color:#000;
    text-align: center;
    padding: 0px;
a:visited {
    text-decoration: none;
    color: #000;
    background-color: #FFF;
a:hover {
    text-decoration: none;
    color:#000;
    background-color:#FFF;
a:active {
    text-decoration: none;
    color: #FFFFFF;
    background-color: #000;
</head>
<body>
<div class="navigation">
    <ul>
        <li><a href="index.html" target="_self">HOME</a></li>
        <li><a href="digital.html" target="_self">DIGITAL</a></li>
        <li><a href="drawing.html" target="_self">DRAWING</a></li>
        <li><a href="painting.html" target="_self">PAINTING</a></li>
        <li><a href="about.html" target="_self">ABOUT</a></li></ul>
</div>
</body>
Thank you.

You have to clear your browser history/cache or all of the links you have visited in the past (while previewing) will show as the visited style which is a white background and black text.

Why is the letter p is not working on my iPhone 4s?

Similar Messages

Maybe you are looking for