Why is the nano not counting the steps in the walking program?

I set up my ipod fitness program and it does not seem to be counting the steps. It will count some and then stop. Do I need to be connected to a fitness device for it to count correctly?

Thanx for this update! I have gone ahead and installed in Frankfurt and the installtion went really smooth so far so good
The only thing that is not working as I expect is the ODBC-connectivity. Maybe you can tell me what I am doing wrong.
I have added port 30015 to one of the predelivered security groups (sg-ab53b4c2).
In the 'ODBC Datasource Admin (64-bit)' I entered for server:port
ec2-XX-XX-XX-XX.eu-central-1.compute.amazonaws.com:30015
Then I have tried the following credentials:
user SYSTEM and the master password (with which I am successfully connecting in HANA Studio)
user SYSTEM and 'manager'
but get
You got any idea?

Similar Messages

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'syn' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Must use Step Input Keyboard prior to using midi controller? When I attempt to use my midi keyboard conteoller for step input, it won't work unless I input the first note in each track via the Step Input Keyboard. This doesn't seem right...

When I try to use my midi controller keyboard for step input, it won't work unless I input the first note in each track via the Step Input Keyboard.. What am I doing wrong?
Logic Studio 9.1.7, OS X 10.7.5

Hi
Playhead in the right place?
CCT

Why does the swiping not work to scroll down the screen

why does the swiping not work to scroll down the screen or swipe from side to side

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

In my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

in my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

First, make sure the headphones plug is completely pushed into the headphones jack. Because the jack serves multiple functions, the fit may be tighter than expected (especially if you have the Apple EarPods).
Also, try using the headphones with another device, to rule out bad headphones. Or try another set of (known working) headphones with the shuffle.
Are you using older headphones that have remote control buttons? Not the latest EarPods and not the immediately previous version of white Apple earbuds. Or non-Apple headphones with remote control buttons. It's possible they are not compatible and interfering with the shuffle's operation. Any standard headphones (with no buttons) should work.
If that does not help, you can try doing a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, reinstall its software, and set it to defaut settings. If a software (or settings) problem on the shuffle is the cause, the Restore should fix it.
Otherwise, if the Restore does not help, it may be a hardware problem. If it has been less than one year since purchase, it is under warranty.

TS3938 The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

Scot Lee wrote:
The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
Yes Rosetta has been gone for over two years. You can always search here for how Michael Lax's instructions on how to run SL Server in a virtul environment, but I don't think it is too kind to gamers.
Advice? Buy an old Mac that runs PPC software.
Cheers
Pete

On the iphone4 (not s)did they fix the signal problem and if they did when did they fix it how long ago (date roughly)

on the iphone4 (not s) did they fix the signal problem and if they did when did they fix it how long ago (date roughly)???????

Apple has not made any changes to the iPhone 4 since its release. The over 80 million people with the phones don't seem to think there's a serious problem.

When i go to terms and conditions it allways syaing the server not available atamoment .what is the advise?

when i go to terms and conditions it allways syaing the server not available atamoment .what is the advise?

What are you trying to connect to? iWork for icloud beta cannot be used from an iphone, only a Mac or PC.

Why are my bookmarks not being saved locally if the save to cloud feature is disabled?

Why are my bookmarks not being saved locally on my ipad mini if the save to cloud feature is disabled?

They should be. If you have lost bookmarks try restarting Safari:
1. Press the Home button
2. Double click the Home button to bring up the "Recent Apps" tray.
3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
4. Touch the "-" to terminate Safari.
5. Restart Safari and see if your Bookmarks are back.

Why doesn't Skype not close when you click the X b...

I'd like to get some input as to why Skype does not close when you click the red X button on the top right corner but rather only gets minimized. It's frustrating and makes no sense at all. The only way to close Skype is to right click the icon in the tray and choose "Quit Skype."
I'd like to understand why this useless feature exists. It renders the minimize button ( - ) useless, which is only two squares away from the X button.
Please don't proceed to list other programs that do this (i.e. some antivirus software) as that was not what I asked. It's standard for programs to close when the X button is clicked, as will happen momentarily when I click the X button on my Chrome browser window when I'm done typing this quation. Thanks

What he was talking about was setting it to ""run as administrator" in the shortcut/executable as you should know that would run the application in a true administrator mode (like Windows XP) vs. the default crippled administrators group in Windows. I personally have not had to do this since I have not run into the issue but for those that have, people claimed it has helped/resolved the issue. In regards to following UI interaction rules, it does as it actually closes the form. Skype doesn't send an additional closure to the resident system tray icon form because it's a memory resident communication program. Some programs give you that option, others don't. Geforce Experience is one of the latest programs I use, that doesn't. Nobody forces anything on you. If you feel your family is "forcing" something on you, you always have the option of "forcing" something on them or suggesting another method you prefer in order to stay in contact with you. In the end that's a family issue, not a Skype one.
If you want to close Skype down in one click you can do so using the provided shortcuts in the following thread. You can also assign those shortcuts hotkeys or assign them to a key on your keypboard/mouse using additional key mapping software to completely close Skype with the press of a single button.
http://community.skype.com/t5/Windows-desktop-client/How-to-quit-Skype-with-keyboard-shortcut-on-Win...

The blue in the histogram is out of step with the other colors. Why and what to do about it?

I'm working through the Lynda.com series. I've been having good results with color casts. However, on some of my photos the blue portion of the histogram is way out of step with the red, green, yellow portion and nothing I do with the tint sliders or HRD sliders affect the blue in any way. What I'd like to confirm is whether the blue in the histogram represents the blue layer in the photograph? Also, if the blue is out of step how do I know if there is a color cast vs something else?
Here is a screenshot of the histogram of a pigeon against a background of green leaves. It looks fine to my eye. Am I reading the histogram correctly? Is there a blue color cast, or again, is that blue representing something else? Also, it looks like there's a green color cast (based on the histogram). Is that correct (looking at the histogram alone)?

The only way to know whether or not there is a blue cast is to look at the image. The histogram is simply reporting the amount of those colors. It doesn't mean that there is an unusual color cast. You shouldn't expect the different colors to be equal. It depends on the image.

Why portal content is not displayed when we give the server IP in the url

Hi all,
I have small doubt in portals.
When we give the portal url in the browser with server alias(Eg: http://rajportal:50000/irj/portal ) it will display the portal roles and the content,
but when we give the Portal server IP instead of server alias (eg: http://10.10.30.30:50000/irj/portal) it will display only portal roles but not the portal content.
please can any one explain the reason
thanks
Rajeev

Hi,
Please the URL is fully Qualified Domain based one or not.
Please check out the links-
Fully qualified name of the portal service application
Regards
Lekha

When using the gradient tool to move a gradient why does the do not symbol show up beside the cross that usually rotates it and how do I get rid of it?

I've tried restarting the tool and the program and it did not work. Here is an example of the do not symbol: Warning, stop and DO NOT symbol | PSDGraphics

You have not provided any system info or details about your document structure, so nobody can know. their could simply be another element or a specific appearance setting preventing this or you have an issue with your input device. Similar behavior has been reported for some Wacom tablets for instance.
Mylenium

Why are drum pads not a valid MIDI input the screen controls pallet?

I'm slowly getting around to creating a Concert that represents my controller setup and realized that the drum pads have a different behavior.
When setting up my Korg nanoPAD as a drum sample controller, I have to map it to a keyboard and not a 2x6 drum pad group. If I do not assign it to a keyboard, I cannot associate it with a channel strip playing back an EXS drum kit. They keyboard drop down in the MIDI input properties for a channel strip will not list the nanoPAD as an input even though I have already associated the pads with their virtual counterparts in the Layout tab.
I can manually assign each pad to a MIDI note, but that sends the note event to all channel strips and I have no control over that.
What gives??
It looks really lame to have another keyboard widget in my concert layout when all want is a representation of the 12 pads on the nanoPAD.

In edit mode, you should be able to create mappings that effectively transform your incoming drum pad note into another note on a specific channel strip. You can create multiple mappings per drum pad in order to trigger different sounds on different notes per channel strip.
If you don't want a keyboard you can also use the "MIDI activity" object, it acts like a keyboard but takes up less space and doesn't display layers. It also glows to let you know that MIDI activity is coming in. Since all of the routing happens through screen objects, you need some sort of object there to do the routing -- either the MIDI activity object or the keyboard. The drum pads let you have additional flexibility since they allow you to make mappings (including changing patches, etc.), but the routing still needs to happen through one of the two routing objects unless you want to make each drum pad directly as I explained above.

Why is the nano not counting the steps in the walking program?

Similar Messages

Maybe you are looking for