Why is the Outlook ".pst" unavailable after using iTunes SYNC?

After installing a new iTunes, I am having to close MS Outlook after syncing my iPone with Outllook using iTunes. The sync operation seems to end okay, but when I try to open Calendar, Contact, on Outlook I get a message, "Unalbe to display the folder. Another application closed unexpectedly while using your Personal Folders File. To prevent potential damage to yor PST, it will not be available until you close all applications currently using it". I shut down Outlook and restart it and all is fine. Any ideas?

Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up    
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store    

Similar Messages

  • Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

    Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
    I Turn it off/on  and nothing changes.

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • Why does the screenline shut down after about 2 clips?  the tutorial worked fine.

    Why does the screenline shut down after about 2 clips?  the tutorial worked fine.

    I don't know about MOD files, since I don't use them
    >As a beginner
    LOTS of learning information in these links
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/

  • What is krb5kdc, why did it  interfere after using or sync'ing new MBA

    what is krb5kdc, why did it interfere after using or sync'ing new MBA ???
    It showed up in console and other logs and activity monitor after sync'ing others with new MBA late 2010.
    Caused keychain problems and connection problems to my well-used secure wifi network and other processes.
    Never happened before the New MBA late 2010, now causing problems with other computers synched via MobileMe after initial sync with new MBA
    Message was edited by: Rhyd

    http://discussions.apple.com/thread.jspa?messageID=6739752

  • Can I transfer the outlook pst file from one mac to another

    Can I transfer the outlook pst file from one mac to another?

    sure you can
    also to a windows pc and import it in a windows outlook

  • Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

    Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
    This problems has been occurring on two different machines over the last two days.

    I think this may not be a browser problem but rather a Google problem.
    I am getting the same problem with the Google Chrome browser.

  • Why does the video stop and start using airplay on Mountain Lion?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

  • Hello Experts! I am trying to match up artwork that I created for my playlists in my iTunes library which looks fine in my iTunes but then only some of my artwork shows on my iPad after using iTunes Match, I either have blank artwork or the original.

    Hello Experts! I am trying to match up artwork that I created for my playlists in my iTunes library which looks totally fine in my iTunes library but then only only some of my artwork shows on my iPad after using iTunes Match, I either have blank artwork or the original artwork. Any ideas how I can make sure it’s all my artwork? Thank you if you do!

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • After using iTunes Match, 5 songs have a "was not copied because the audio format is not supported by the iPhone".

    After using iTunes Match, 5 songs have a "was not copied because the audio format is not supported by the iPhone".
    I have deleted these songs and downloaded them from iTunes Match (they were "matched" and not "uploaded" files).  However, it still does not work.

    I have the same issue with 8 songs in my library. All are "Matched" and I've tried deleting them and redownloading them from iTunes Match, but they won't play in iTunes or transfer to any of my iDevices.

  • After syncing Pc-Ipad my Photo's are out of order. In the folders they don't follow the Date-order. I use Itunes 10.6.1.7 and Ipad 5.1. The Problem is the same with XP and Windows 7.

    After syncing PC-Ipad my Photo's on Ipad2 are out of order. In the Folders/Albums the Photo's are no longer in the order of (EXIF) dates. I have updated Itunes to 10.6.1.7 and IPad2 to 5.1. I have reset the IPad2. I cleaned the Photo-cache and removed Itunes and Installed again. I tried it with Windows 7 (64) and XP, makes no difference. I tried it with one Album, Photo's also out of order. It doesn't seem to happen with my Ipad1 older software version. I there a bug in the newest software? Thanks for Help!
    Rudy from the Netherlands.

    problem solved after updating itunes to 10.6.3

  • The computer I originally started using iTunes on a few years ago is no longer functional. How do I make the same library appear on my new computer with the newest iTunes?

    The computer I originally started using iTunes on a few years ago is no longer usable, but for some reason some of the songs I have now are not showing up in my library on the new laptop I just bought. How do I consolidate the total songs on my iPhone to include them all in a new library on my iTunes in this new laptop? And why isn't this new laptop letting me update to ios 6 without deleting everything on my phone?

    Your music will ONLY be where you put it.
    It will not magically appear anywhere.
    You buy one and only one download.  it is your responsibility to move/copy/backup your music.
    You need to copy everything from your old computer, or your backup copy of your old computer, to your new one.
    Leaving your e-mail address on a  public forum may not be wise.

  • I have 2 iphones in the family and want to use itunes match on both devices, but my husband has his own itunes acct, how can he use the main itunes library and get out music on his phone also

    I have 2 iphones in the family and want to use itunes match on both devices, unfortunately my husband has his own itunes acct and when i change on his phone to my itunes acct it states that the email is already in use, any help on how to get the itunes match to go onto both devices, thanks

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • After using iTunes my Mac doesn't shut down!

    My MacBookPro doesn't shut down after using iTunes. I have try anything and the apple support can't also help me.
    I can only stop my Mac with the power button. If I don't use iTunes I have no problems to shut down the Mac.
    Have anybody a similar problem and can help me? Thanks

    It's so curious...
    I found something at: https://discussions.apple.com/message/17590111#17590111
    I'm not sure whether this issue caused by Library/Preferences/com.apple.alf.plist.

  • HT1212 my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Maybe you are looking for

  • How do I get a Windows 7 disc without the Toshiba add-ons?

    I recently purchased a Toshiba notebook and would like to set it up without all of the add-ons that Toshiba provides.  My understanding is that the recovery media won't let me do that, so I need an actual Windows 7 disc. Since a license for Windows 7

  • How to get User input in JTextField?

    How to get User input in JTextField? Can u anyone give me some code samples? thanks

  • How do I deactivate a license key for server 2012 r2 essentials

    I bought a retail version of server 2012 r2 essentials to upgrade my 2003. I found my software is not compatible with "essentials" and it is compatible with "Standard".  Now I am buying a retail standard edition. My buddy is interested in the "essent

  • Archive Messages in XI

    I am trying to Archive messages in our dev environment.  I have completed steps listed in the below document https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50 When I tried to do a read using

  • Check number print with two zero starting

    I want add to zero before check number, example 4562  to be printed as 004562. SELECT 'xxxxx' as 'Debit A/c No', T1.DocDate as 'Date', T1.DocNum as 'Txn Ref', T1.CardName as "Benificiary Name", 'CHK' as 'Payment Type', T1.DocTotal as 'Payable Amount'