Why is the PopUp Window Prompt for Master Password Not Showing?

I have set a Masterpassword and it will usually show up when either start Firefox or try to enter a password on my gmail account. I have also used the F5 command to force this to pop-up. This is no longer working at my home computer or at work.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

HT2534 Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Try this support page provided by Apple...
http://support.apple.com/kb/ht2534

Why is the music I purchase on my iphone not showing on my laptop Itunes?

Why is the music I purchase on my iphone not showing on my laptop Itunes?

iTunes Store: How to enable Automatic Downloads - Support - Apple

Why does the solution center prompt for cd every time?

My HP 8500 constantl;y prompts for me to insert the CD each time I try to scan. I have lost the CD, and just paid $10 to get a new one, but it is very annoying! How do I stop this?

Hi Tom,
There is something missing in your Scanning software.
The Solution Center is like a dog with a bone about missing stuff.
Something to try/consider:
See the Solution on this Post - it has the information that might help you correct your Solution Center woes.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/cannot-open-solution-center/m-p/110924...
If, for some reason, you cannot download new software for your printer as outlined in the above Post,
and you really do not want to wait for your new CD, then you can Uninstall the Solution Center Software from your computer. See the warning below.
Uninstalling your Solution Center:
BE AWARE: If you elect to uninstall Solution Center to make it stop annoying you...Your printer might still work after you reboot and let the computer try and install some standard drivers - HOWEVER, it will only work with whatever "bare bones" drivers are available on your system. It might not work at all. It depends on your Operating system, whether there are enough HP standard drivers for your printer to run the basic printer HP8500 functions, and whether things get tangled up when you uninstall the printer software. It could go well, or it could become a nightmare and you could be more unhappy than you are right now.
The very best scenerio: You find at the Solution Center link a way to download the Full Featured Software for your HP8500 printer and it fixes your scanning error.
I hope this helps.
Say “Thanks!” by clicking Kudos Star next to the Post that helps you.
Mark a Post “Accepted Solution” to say your issue is solved.
Kind Regards,
Dragon-Fur

Why does the App Store asks for wrong password

Hi,
I'm travelling a lot between the U.S. and Europe, which causes that I have 2 Apple IDs.
So there are some apps I purchased with my US-Apple-ID, and some apps I purchased with my second apple ID.
If I wanted to update my apps from both accounts it first asked my for the password of my 1st Apple ID, then the one of my second.
This worked fine the past two years.
Now it only asks me for one of them, but still wants to update all of my apps. Finally it says that this app has not been purchased before, but I can purchase it know by tapping "ok". (or something like this). I already bought it. why does it ask for the wrong password of the wrong apple id, I didn't purchase it with?
Here are the steps I already tried:
1. restarting my device
2. Sign off and sign back in with my ID I purchased it with. -> Then tapping "Update All" OR just "Update" at a specific app stills asks me for the password of the wrong ID. (I did this with the appstore app and the settings app->AppStore)
3. sign in with the ID I purchased it with, then search for the specific app and hit "update" (where it usually says "buy", or "free" if not installed yet). It still asks me for the wrong apple id.
4. I'm not syncing my apps with iTunes anymore, just music and my photos. I don't want to sync my apps because I would have to reinstall all my apps again and loose all of it's data.
5. I still can buy new apps with both accounts and then it's still asking for the right ID, I want to purchase it with (the one I'm currently signed in).
6. Deleting the app, then sign in with the right ID, search for the ID and redownload the new version worked, but in this case all my app data is lost.
7. In App Purchases are NOT working, it asks for the right password, but then it's says that I have to buy the app again. ?!?
Do you have any idea, why this happend or why I'm unable to update my own apps?

There is a 15-minute window. After 15 minutes of inactivity, you will again be prompted for the password next time you try to purchase/download something.

Error while signing in. No prompt for Master Password.

Firefox 3.6.15 (Mozilla/5.0 (Windows; U; Windows NT 5.1; sv-SE; rv:1.9.2.15) Gecko/20110303 )
Firefox sync 1.7
Sync NEVER works automatically. In a new FF session it always reports "Error While Signing In". If I try to connect manually I must go through the set-up dialogue and enter my Master Password etc and then it works (during that session).
I have a Master Password defined.
Sync doesn't prompt for that before trying to connect. So the connection fails and sync concludes that a set-up must be performed.
Useless extension in current state.

Hi,
as per the error message is:
"... The part /soap:Envelope/soap:Body was required to be signed by the policy with the transformations [], but the signature was not accepted. (Info: number of valid signatures: 1, number of accepted signer certificates: 0.) ..."
I guess the cert. setup either on your side or the other system's side is not fully correct. Check whether all cert., priv keys and public keys are exchanged propperly and setup as trusted certs.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 9, 2009 1:24 PM

How to reduce prompting for "Master password"

I hope there may be a setting to address this issue...
I have a number of passwords saved for various non critical web sites such as this forum. Recently I set a "master password" to protect my saved passwords. Whenever I open a page which has text boxes for credentials which I have saved I am prompted for the master password regardless of whether I wish to authenticate to the site or not. I would like to configure Firefox to only open the saved passwords repository (for want of a batter word) when I choose to authenticate to a site.
Is this possible?
TIA,
Ken
p.s. I close Firefox (to flush cookies etc.) OFTEN so simply unlocking the saved passwords once a day and leaving Firefox running is not an answer.

Open the PrefBar Customize window via the right-click context menu of the PrefBar. 
Create a new pref check via the right-click context menu of the right pane: New > Pref Check
Enter an ID (e.g. chk_rememberSignons) and a label that appears on the PrefBar and put in the Prefstring field signon.rememberSignons to specify which pref is affected. 
Put value in the toPref and fromPref fields, that will toggle the pref between true and false and show a check-mark with the true value. 
You can assign a hotkey to that pref if you want to toggle the pref with the keyboard. 
That still works if you want to hide the PrefBar with F8 to get more screen space.
I color the check boxes with code in userChrome.css to make it easier to spot that I've changed some of them
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#prefbar-buttons checkbox[id="prefbar:button:chk_rememberSignons"] .checkbox-check[checked="true"]
{ -moz-box-shadow: 0pt 0pt 5px rgba(153,255,51,0.8) inset, 0pt 0pt 20px rgba(153,255,51,0.8) inset !important; }</nowiki></pre>

The capture window in Premiere Pro does not show video feed from Beta SP

Dear Sirs
The capture window in Premiere PRO CC with blackmagic 4k extreme (Desktop Video 10.1 for Windows) does not show a live video feed in, from analog beta sp, It works only in media express.
Can you help us?
Thanks
Alessandro

Starting from a fresh new win7 installation, all problems solved
Bye
Alessandro

Why is the placeholder Q&A for multiple choice not visible on screen?

After inserting 6 Multiple choice quiz slides in Captivate 7, the placeholder Q&A text is not visible, so there's no way for me to modify them with my Q&A's. However, they are visble in Preview mode. Any suggestions?
This is happeneing in a project that someone else created & I am editing. I made a new version & copy/pasted the quiz slides into a new file. Ever since then I've had this problem. When I open the original file, it's now doing the same thing there as well. What gives??
Below is what I'm seeing. If you look at the slides on the filmstrip on the left, you can see that there is nothing there, however in the Preview, you can see the placeholder text.

Hi Rod & Lily! Thanks so much for replying.
OK - the screen shot below is what I see when I am in edit mode. Completly blank except for the "Multiple Choice" heading at the top. I've highlighted in red on the Properties & Filmstrip, which Master slide I'm using. Hopefully you can see that on the Master Slide the placeholder text is there, but not in the edit view.
Lily - below is a screen shot of the Quiz Properties. Hopefully you can see it.

Why are the events on my iPhone and iPad not showing on my Macbook Pro?

Why isn't icloud posting events from my iPhone/iPad to my Macbook?

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Disable Collaboration Features coming up in the popup window for somegroups

Hi,
How can I disable the Collaboration Features
(Send Email,Create Appointment,Send InstantMessage,CreateTask etc )
that come up in the popup window whn we click on the link provided just after user name. I know how it is to be done for all users. But I want it deactivate for certain groups only.
Regards
MK

You need to configure command groups.
Use following link:
http://help.sap.com/saphelp_nw70/helpdata/en/98/dd48a9b4a197489a54187c99372bce/frameset.htm
Regards
Prabhakar Lal

Refresh only page item while submitting data from the popup window

Hi All,
I'm pretty new to Apex .....
I have a form with text items as first few entries and then a radio button list and few text items again. On selecting certain radio button I have a popup window which acts as an interface for the next text item in the calling page. The purpose of having the popup window is that the text item following the radio button takes the input with certain character delimiters along with the data. Instead of using delimiters while entering the data I want a meaningful data to be keyed in the popup window and all the string operation to be done as a background process. I have been successful this far. I'm using the below javascript on click of the submit button.
javascript:doSubmit();
window.opener.doSubmit('REFRESH');
window.close();
On doing this I'm losing the values submitted for the items prior to the radio button(including radio button). Please note, I have a dynamic action set on page load to reset the values. Is it possible to refresh just the page item from the popup window.
Also, I tried excluding the window.opener.doSubmit('REFRESH'); from the above javascript. It sets the item with the expected value (viewed it in the session items, however I would like to view the concatenated string on my calling page) but following this there is an insert operation which uses all the necessary items in the form. All values except the value returned from the popup window is populated into the table. Am I missing something.
Any help in this regard is appreciated.
Thank you!!!
Regards,
Ganesh

Value set using Javascript is only in your browser page but is not yet available in the session. This is why the report doesn't return the expected output.
Before refreshing the report you would need to set the session state of this item.
You can set it after you assign the item a new value or before the report is refreshed
For Interactive Reports, this is available built in
you can go to Report Attributes >Advanced Attributes -> Page Items to Submit and specify P2_X1 for the field(and any other page item that the report is dependent on)
For standard reports, you can create a Dynamic Action that is triggered "before refresh" of the report's region, and choose PLSQL as the action types, give a dummy BEGIN NULL END; for the code and specify this item name in the page item to submit field so that it sets the items's value in session.

About the popup window created by if_wd_window_manager- create_window

hi,experts
i want to put out a pdf file in popup window.and use method create_windos of if_wd_window_manager to get it.then i find a question: i at least click twice to close the window....why? what modification i need to implement that the window close as soon as i click the "CLOSE" button once. i guess that is normal.
the original codes is as follows:
data: lr_view               type ref to if_wd_view_controller,
        lr_api_main           type ref to if_wd_component,
        lr_window_man         type ref to if_wd_window_manager,
        comp_usage            type ref to if_wd_component_usage,
        l_title                   type string value 'print the contract'.
        lr_window              type ref to if_wd_window.
lr_view = wd_this->wd_get_api( ).
lr_api_main = wd_comp_controller->wd_get_api( ).
lr_window_man = lr_api_main->get_window_manager( ).
l_title = wd_comp_controller->model->get_text( '006' ).
call method lr_window_man->create_window
    exporting
      modal        = abap_true
      window_name = 'POPUP'
      title        = l_title
      close_button = abap_on
     BUTTON_KIND = '1'
     default_button = '5'
    receiving
      window       = lr_window.
lr_window->open( ).
thanks..looking forwards to your help!

hi ,Sajid
1.
data l_api_v_new_assignment type ref to if_wd_view_controller.
l_api_v_new_assignment = wd_this->wd_get_api( ).
data window_controller type ref to if_wd_window_controller.
window_controller = l_api_v_new_assignment->get_embedding_window_ctlr( ).
data window type ref to if_wd_window.
window = window_controller->get_window( ).
window->close( ).
to your first option.   my codes are written in a view of the main windows and the popup window is another, so can't get the exact window.. so there is a dump error after i test this one.
iF MO_POPUP TYPE REF TO IF_WD_WINDOW, IS AN ATRIBUTE DEFINED IN COMPONENT CONTROLLER
and in popup_method this is the coding related for opening popup .
DATA:lo_api TYPE REF TO if_wd_component,
lo_win_manager TYPE REF TO if_wd_window_manager,
lo_api = wd_this->wd_get_api( ).
lo_win_manager = lo_api->get_window_manager( )
wd_this->mo_popup = lo_win_manager->create_window(
title = 'xyz'
window_name = 'WINDOW NAME'
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_warning ).
wd_comp_controller->mo_popup->open( ).
Then for closing pop up on event handler method of no write the following coding
wd_comp_controller->mo_popup->close( ).
to second one... i think this part of codes are the same as mine except the last sectence...... and i add the last sentence in my coding but nothing sepecial happend...
looking forward for more helps...thanks a lot

Os10.5.8 connection FTP server no popup windows asking for my logging and password

I'm actually working on mac book pro 10.5.8 and I try to access a FTP server. Finder then command+P and my address. The finder open me two files "Array and Info" but nothing in the Array folder where everything should be. The problem found is that the system is not asking me for my password and login. My friend who is working on 10.6 get this popup windows asking for login and password. Why I don't get this windows on os 10.5.8.

find the trick. ftp://name@server

ICloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option. I'm prompted for a password to an account that doesn't exist

iCloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option. I'm prompted for a password to an account that doesn't exist. Anyone know what I can do to fix this or why this is happening.? I had no issue putting in my new Apple ID everywhere else, I could sign out of the old and inactive account and then sign back in using my new and proper one. However, after the update to 7.3 it did a whole welcome to yr iPad and a set up thing and it went to set up iCloud and had my old Apple ID in grey where I can't change or edit it, it wants the password, when I put in the old password, it say yr Apple ID is incorrect but yet it won't let me change it??????? Anyone???

Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.

Why is the PopUp Window Prompt for Master Password Not Showing?

Similar Messages

Maybe you are looking for