Why is the Real-Time Idea Exchange completely ignored?

Just looked at the LabVIEW Real-Time Idea Exchange and noticed that only one idea is marked completed, and two more (both posted in 2009, nearly 5 years ago) are "In Development." Those ideas aren't even the top-kudoed ones. NI - why ask for ideas for improvements, and then not implement any of them? (Yes, I have a personal interest here - the second-most kudoed idea in the real-time area is one of mine.)

First off let me say thanks to you and all of the Idea Exchange contributors. The whole purpose of the Idea Exchange is for you, the users of the NI Platform, to bring your considerable experience to the table as we continue adding features and functionality to the NI Platform. Your passion is one of the primary forces that causes the NI Platform to grow and change in varous ways so that the application challenges of scientists and engineers all over the world can be solved.
There are many user suggestions across the whole Idea Exchange for us to weigh when considering how to allocate our development resources. We try to judiciously consider which ideas will have the biggest impact on the NI Platform users, and as a result we often have to say "no" or "wait" to some ideas so we can say "yes" to others. You're definitely correct that the statuses need to be updated and I'll be doing so in the near future. Though this may give the impression of being ignored, I want to assure you that the ideas are read and evaluated by the R&D and Product Marketing departments with careful thought and deliberate intent.
We hope that events such as NIWeek bolster your confidence in the progress of the NI Platform as you see the new hardware and software features being introduced. Though you may not see an immeadiate reward for your dilligence in suggesting ideas, please continue submitting your ideas. The long term effect will be a powerful platform of products designed to meet the community's needs. Thank you for your continued support and engagement.
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

Similar Messages

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

How can I save/write data on the hard disc of the Real-Time System?

I would like to acquire huge size of data via LabView Real-Time System.
Since data is so huge, I am now thinking that it might be good idea to
write/save data on the hard disc of the Real-Time System first and then
transfer the data file to a data processing PC using FTP etc.
If you know how to save/write data on the hard disc of the Real-Time System
(Ver. 7.1), please let me know.
Thanks,

Just to add to Aitortxo's good answer,
Since you have only one Drive ( C:\) on your RT, just keep monitering the availible disc space.
After every few set of file writes keep transferring Backups delete these files, so that you keep C:\ drive space for running your applications.
Regards

What is the sql query for the real time reports Resource Stats?

Does anyone know what the query is that the real time report tool uses for the Resource Stats page? Trying to develop a custom report that displays similar information that is updated regularly.

Hi,
009 wrote:
Hi Frank,
Just wanted your opinion on the above given SQLI'm not sure I understand it.
I added some more formatting to help me read it:
SELECT      A
,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
          OR A=LAG(A,1) OVER (ORDER BY A)
          THEN LAG(B,1) OVER (ORDER BY A)
     END B_LAG
,     B
FROM     (
     SELECT A, B
     FROM
          SELECT '1'A,'Apple' B FROM DUAL UNION ALL
          SELECT '1'A,'cat'B FROM DUAL UNION ALL
          SELECT '2'A,'bat'B FROM DUAL UNION ALL
          SELECT '3'A,'rat'B FROM DUAL UNION ALL
          SELECT '2'A,'yellow'B FROM DUAL UNION ALL
          SELECT '1'A,'pin'B FROM DUAL
     CONNECT BY PRIOR A=B
     ORDER BY A
);What is the purpose of the CONNECT BY in what you have so far?
Is the idea that you will add another CONNECT BY query, using
CONNECT BY b_lag = PRIOR b?
Do you think that will be better than using ROW_NUMBER?
Will it work if (a, b) is not unique?

What is the real time use of implicit and explicit cursors in pl/sql

what is the real time use of implicit and explicit cursors in pl/sql.............please tell me

You can check the following link ->
http://www.smart-soft.co.uk/Oracle/oracle-plsql-tutorial-part5.htm
But, i've a question ->
Are you student?
Regards.
Satyaki De.

Is there a way to create dependency on the real-time jobs

Hi,
We have around 80 real-time services running and loading the changed data into the target.
The process being used is
IBM Informix > IBM CDC > JMS (xml messages) > DS real-time services > Oracle EDW.
While using the above process, when ever there is change in the fact table and the dimension table, both the real-time services are loading the data at the same time into the target. This is causing issues in looking up data with the timing issue.
Is there a way where we can create a dependency and resolve the timing issue and make sure the lookup table is loaded and then the master table is loaded?
Please let me know.
Thanks,
C

Hello
With the design you curently have, you will have potential sequencing issues. There is no magic in Data Services to solve this.
You might want to consider building more complex real-time jobs that accept more complex data structures and have logic to process the data in dependency order.
Michael

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Creation of Daemon for the DTO for the real time data aquisition

Hi i need help how to create a daemon for the DTP in the real time data aquisition.i'm learning now Sap and practicing a lot to be professional but i need a bit of hel.Can you please give me some details how to create it?
I have to access the RSRDA T-code and what i need to do after?

Hi First of all you need to create a real time DTP once that is done go to RSRDA T-code and click on the Create Daemon
and right click assign DTP , here you can assign the DTP once that is done save and execute . your Daemon will run
Thanks
Santosh

How to get last Build date of a dll in the real time target

Info On My Project
I am working on LabWindows CVI 12.0 for development . This project is a real time application for hardware, which is having Phar Lap ETS as RTOS...
I am facing some problems while checking Build date of my Application file( .dll)
I have tried to use GetFileDate API. But it is not supporting for realtime Target..
So i have tried __DATE__ macro.. That also having some problems..
How to get last Build date of a dll from the real time target ??
Please Help to solve this....
Thanks
Vaishakh A K

Please reply if any one have suggestion...

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

Can we use the AdventureWorks2008R2 data for the real time project.

Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.

Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com

BAdI........How are they used in the real time scenario.

Im a rookie in ABAP development and i was wondering that how we use the BAdI enhancement technique in the real time scenarios. Like do we get create them or we have few already built BAdI's which we work on? Can any body please explain how this works.

Hi Ramana,
Business add-ins are enhancements to the standard version of the system.
Business Add-In is a new SAP enhancement technique based on ABAP Objects.
They can be inserted into the SAP system based on specific user requirements.
Each Business Add-In has:
at least one Business Add-In definition
a Business Add-In interface
a Business Add-In class that implements the interface
In order to enhance a program, a Business Add-In must first be defined
Subsequently two classes are automatically generated:
An interface with IF_EX_ inserted between the first and second characters of the BADI name.
An adapter class with CL_EX_ inserted between the first and second characters of the BADI name.
The Application developer creates an interface for this Add-In.
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Have a look at http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
How to develop BADI
Reward if useful.
Thanks
Aneesh.

Where can i check in the real time monitoring tool if there are active calls in progress?

where can i check in the real time monitoring tool if there are active calls in progress?

Hi
Selecting Call Manager -->Call Process ---> call activity
HTH
Regards
Carlo

VI Server in the real time target and Vi client under the local computer

Hi,
In my project i want to make a data communication between a vi server which is runnig in the real time target and a vi client runs under the local computer (My Computer target).
My problem is when i Click the property terminal of the property node function (located on the Functions>>All Functions>>
Application Control palette) , i don't find the front panel open option from the shortcut menu.
Thanks.

The Front Panel options are methods. Try dropping an Invoke Node down instead of a Property Node.
Applications Engineer
National Instruments

Why is the boot time on my mac pro 2010 slower than my 2010 core 2 duo 13 mbp?

Why is the boot time on my mac pro with clean install of lion around 34 sec on my mac pro 2010 2.8 quad core, when it is only around 17 sec on my 13 mbp 2.67 core 2 duo?
The mac pro uses around 13 seconds from i hit the power button til i hear the chime and see the grey screen.
Is it because it uses time to find the wireless keyboard, trackpad and cinema display?
Mac pro has 16 gb ram and 240 gb ocz agility 3 ssd, macbook pro has a intel 120 gb ssd (320 i think) and 8 gb of ram, so the mac pro has more umpf....

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Why is the Real-Time Idea Exchange completely ignored?

Similar Messages

Maybe you are looking for