Why is the render quality less than the source files
I am setting render quality at Best, Full 1920 x 1080. The movie quality in either a quick time or windows media player file is terrible. These same files export at good quality at school with the same settings. Why am I getting poor image quality on my PC at home?
The first image is a screen shot of the original footage taken in AE. The second image is the exported qucktime. The quick time is at half size and the AE is 50%. The source files are a qucktime output of a frame by frame animation I created in AE. I have tried rendering both interlaced and progressive. My instructor had me drop the source files onto the "Create a new composition" icon at the bottom of the project window so AE would interpret the sourcefiles correctly to be exported back to Final Cut Pro. The format options are set to no compression. I don't know how to tell what codec I am rendering to.
My instructor isn't any help since I am working on a PC. He only knows Mac.
Similar Messages
-
How Order was transmitted even if the quantity was less than the minimum
Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
RegardsSanjeet,
Check the table MVKE
MVKE~AUMNG
MVKE~LFMNG
thanks\
Mahesh -
Why export dump shows less than the actual size?
why export dump shows less than the actual size?
i tried to find to find out the logical size using the following command
select sum(bytes/1024/1024) from dba_segments;
SUM(BYTES/1024/1024)
739when i tried the following query removing index segement:
select sum(bytes/1024/1024) from dba_segments where SEGMENT_TYPE \<\> 'INDEX' ;
SUM(BYTES/1024/1024)
535What other type of information is not exported in a full database export? -
The amount of down payment must be less than the invoice amount
Hi all,
Our customers are using SAP 2007-PL15 and SAP 2007-PL41.
When we want to create a down payment for a sales order, and we want to pay the entire amount of the sales order, including tax, we have to put an amount inthe TOTAL field of the Down Payment window since by default, the down payment amount is the total of the invoice before applying tax. The DPM is
higher than 100% (strange but I think it's normal since the down payment is not planned to take the tax in consideration).
Then, we create an incoming payment for this down payment. It's ok.
Then, we create an invoice based on the sales order we have paid with the down payment. It's impossible to use the down payment for the invoice... why that ? We receive the error 'The amount of down payment must be less than the invoice amount'. This causes big headaches to our customers !!
Could you explain us what to do please ?
thanks,
LuceI'm very sorry, I have a similar question in dealing with AP Down Payment Request Linked to AP Invoice, my case like this:
1. I created 3 AP DPRs,their amount are each 100,000 RMB(for example, their document number are 10,11,12). then do the outgoing payment fully paided.
2. I created a AP Invoice with the amount 150,000 RMB(for example, this AR Invoice document number is 5). I use the buttom"Total Down Payment",and selecet AP DRP No.10 and 11. When I click the buttom"Add",an error shows:
The amount of down payment must be less than the invoice amount
and I don't know how to continue.....
Many Thanks
Kam
(PS:My English is poor,forgive me please. Shall I Speak in Chinese? then I can describe this question more clearly.) -
Now it's stuck with the progress bar less than a quarter full. I have also tried resetting through itunes which works right up to the point where itunes states that it needs the passcode to be inputted into the ipad to connect to it. At which point it then sticks at the same progress bar point. HELP!! please, this ipad is really important to my work.
Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck -
Seagate FreeAgent Go is making a clicking sound and the light is rapidly blinking. My Macbook is no longer recognizing it. Is there any way to pull all the songs I have saved on it? The SeaAgent is less than a month old!
Does anyone know how to fix this issue?
Or at least recover the lost data?
Thanks!How to fix: the drive is in warranty, so contact Seagate for a replacement.
How to recover your data: Do you have backups? (If not, you really, really, should.)
You can try downloading Data Rescue, which will run in trial mode and let you know if the data is recoverable. (You can then choose to purchase the full version if it works for you.) A clicking drive, though, is usually (though not always) a sign that the drive cannot be recovered.
Matt
Edit: fixed link. -
Messages in Xi is less than the messages in R/3 server after processing.
Hi Experts
I have a scenario file - Idoc.
XI picks up the file from FTP process it and sends to the R/3 server.
Now I have a problem is when I check the Data in XI using IDX5 or SXMB_MONI the no of messages in xi is less than the messages in R/3 server.
I am checking the data of the last day like 8th May from 00:00:00 to 23:59:59 in both the cases.
In R/3 I check using BD87 t code.
ThanxHi Divyesh
Thanks for your prompt reply.
Ya I am also doing exactly the same . But the problem is that I am checking for yesterday datas.
In idx5 I get total of 2625 messages for orders.
When I check the same on BD87 i get 2636 messages with status 53 & 1 message with status 51.
Difference is of 11.
Now the question in how is it possible that it is picking 2625 data from FTP and after processing its sending 2637 data on R/3 server.
Thanx -
I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other
Only you can make that determination. All things being equal the 2.5 GHz model is slower.
-
PO is getting released even if the total amount is less than the last PO am
Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
PrishuHi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin -
The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.
The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.
-
Message no. RM109 The quantity at RP is less than the quantity at next RP
Hello everyone,
I am getting an error in regards to a reporting point. I tried going into MF4R to reset the reporting points and when I do I get the following message:
The quantity at RP 0220 is less than the quantity at the next RP
Message no. RM109
Diagnosis
The reporting point structure is inconsistent as at reporting point 0220, the backflush quantity is less than at the subsequent reporting point. In a consistent backflush, the quantity at a subsequent reporting point (work in process) always less than or equal to the quantity at the previous reporting point.
Procedure
Check the reporting point stocks using transaction MF26. Post any missing quantities at previous reporting points.
I have went into MF26 and "Yes" reporting point 0220 is less than the following reporting point. My question is... how do I fix this? Any help will be greatly appreciated.Good morning Raj,
Here is what MF26 is showing:
614830 0033 0001 W3300
0010 84 PC
0020 38 PC
0030 38 PC
0040 38 PC
0050 38 PC
0060 84 PC
0070 84 PC
0080 84 PC
0090 84 PC
0100 38 PC
0110 84 PC
0130 38 PC
0140 38 PC
0150 38 PC
0155 84 PC
0160 38 PC
0165 84 PC
0170 84 PC
0180 38 PC
0185 84 PC
0190 84 PC
0200 38 PC
0210 38 PC
0220 38 PC
0225 84 PC
0230 84 PC
0240 84 PC
0245 84 PC
0246 84 PC
0250 84 PC
0260 84 PC
0270 84 PC
0280 84 PC
0290 84 PC
As you can see RP 0220 shows only 38 pcs RP 0225 and up shows 84 pcs. Using MFBF I backflushed 46 pcs to RP 0220 to make it equal to the 84 pcs. But, when I went back into MF26 RP 0220 still shows 38 pcs.
Thank you for your help!
Rhonda -
JPS-00080: Credential store schema version 12.1.2.0.0 is less than the latest schema version 12.1.3.0.0, upgrade the Credential store schema to latest version.
Hi All,
When trying to extend my domain, it fails with above error.
any suggestions on fix?
is this related to Fusion Infrastructure ADF RCU utility?
thanksHi JCGO,
The Schema installed on your DB is 12.1.2.0.0 but the Domain Extension requires 12.1.3.0.0.
One solution is to run the 12.1.3.0.0 RCU, drop the existing schema on your DB, followed by installation 12.1.3.0.0 schema on the DB, so that the Domain extension gets the 12.1.3.0.0 schema
One more solution is to open the template on which you are extending the domain. The templates are present in ${MW_HOME}/oracle_common/common/templates/wls , explore to the required configuration inside yourtemplate.jar and comment out the Credential store schema version pre-requisite. This is not a good approach, but still it'll be a good workaround since 12.1.2.0.0 and 12.1.3.0.0 schema wont have much difference.
Thanks,
Shiva Shankar B N -
Required delivery date in sales order shoud not be less than the inhouse pd
Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time.
Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
Required delivery date in sales order shoud not be less than the inhouse production lead time.
Please help.
RegardsIMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here select the combination of your Availability Check & Checking Rule.
Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM -
GR date lesser than the PO date, the system should show an error message.
Dear Gurus,
if anybody puts GR date lesser than the PO date, system should display error this happens because the system allows back dated posting of 101 MVT in MIGO.Similarly the IR date should not be less than the GR date. This happens because the system allows back dated posting of MIRO also.
Regards
ASHOK KHi,
Use the badi MB_DOCUMENT_BADI and compare dates of EKKO-BEDAT and MKPF-BLDAT for MIGO.
USe the badi IF_EX_MRM_INVOICE_UPDATE PROCESS_AT_ and compare the dates of MKPF-BLDAT and RBKP-BLDAT while saving the invoice for checking the back dated entries and throw an error message.
Regards,
Bharat -
When I click on a website in my Reader list in Safari, why does Top Sites open rather than the website I've clicked on?
Go step by step and test.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click “Remove All Website Data”.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Maybe you are looking for
-
II've just replaced my internal hard drive for my desktop because it failed And installed Yosemite. I had an external hard drive but it had Mavericks and now I can't access my old iPhoto. What can I do?
-
Please help with my Ipod Touch problem!
My ipod touch will not leave restore mode(besides going into dfu mode), I tried everything I called apple and I went to the apple store. they said it would be $200 to replace and I dont feel like paying that. It turns on and everything but it will no
-
Selecting the Planning Level for Statistical Forecast in S&OP on HANA
Hello together, we currently face an issue regarding the statistical forecast in S&OP on HANA: The customer wants to implement an S&OP process containing the two steps statistical forecast (automatically calculated) and sales forecast (manually deter
-
Migrate SBS 2003 to Windows Server 2012 Standard
We currently have two servers (SBS 2003 Standard utilizing Exchange 2003; Windows Server 2003 R2 Standard with SQL 2005). We want to retire the SBS or maybe both. We have purchased a new server (Windows Server 2012 Standard with licenses for Exchange
-
HIDE STATEMENT IS MUST OR NOT FOR INTERACTIVE REPORT
HI, IN Interactive Report : without using the hide statement we will made the interactive report? and hide statement do its job after every increase of the sy-lsind please explain.. thanks margani