Why is the security warning messages menu deleted on firefox 4?

The warning messages option under security menu is missing on ff4. Is there an easier way to get it back instead of using "about:config"?

Not that I have seen.

Similar Messages

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

How to stop HTTP Security warning message in transactional iview

When I am trying to access ECC through transactional iview then I am getting HTTP security warning message i.e. This page contains both secure and nonsecure items. Do you want to display the nonsecure items?
I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
Pl help to resolve.

Hi AshuGrover_in,
First, welcome on SDN!
> I think it is because portal is accessable using HTTPS protocol and when we access ECC then it uses HTTP Protocol.
> Pl help to resolve.
This might very well be the root cause of the issue, and if it is, you know the resolution - make all systems accessible via https.
Anyhow, to examine the exact cause creating this message you could use tools like HttpWatch or something similar and record the client accesses to the server. If you originally have a GET to a https address, the first http request caused by the original request will throw this message.
Theoretically, on client side, you can switch off this message: Search for "switch off http https warning" on google and you will get all possible instructions for the different clients. Anyhow, a clean landscape design with complete https connections is the aim you should have.
Hope it helps
Detlev
PS: On SDN, if something helps, you might reward the answer, check it out.

WLC cert to avoid the security warning page

Hi guys,
I am doing some tests with installiing a 3rd party cert on a WLC to avoid the security warning page when trying to access the WLC through https, and I am following the following configuration example:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
I have followed the same precedures given in the above document, and I am using windows CA to sign the CSR just for a test, I could install the final .pem cert successfully onto the WLC however I am still getting the same warning page when I was trying to login to the WLC through https. I have checked in my certificate store and I have trusted the root CA which is the windows CA in this case.
I have also tried to access the WLC from the CA server (windows 2008 box) still getting the same warning message.
so what should I do in order to make this to work with windows CA? did I missed something in the configuration?
Thanks in advance for your time and help.
Andy

ok guys.... I was wrong last time... actually after double check again it was NOT working .... I think i just simply trusted the cert last time when i was using firefox....
I have tried a number of different things and double checked the places that mentioned previously in this thread however I could not pick up anything wrong in particular, although I know there must be something I have missed out.....
so this time I have also read through some other references on the web, and found the following:
http://www.my80211.com/home/2011/1/16/wlcgenerate-third-party-web-authentication-certificate-for-a.html
I think I did very similar config and only difference is that I am using unchained cert.
I have double checked the following:
on virtual interface configuration, I have ip address 1.1.1.1 and DNS host name as "wlc2112.mydomain.local"
from the controller GUI --> Security --> web auth --> certificate, under subject name, I have CN=wlc2112.mydomain.local, however under Issuer name, I have CN=mydomain, this is a bit different from the last screen shot in the above link. could this be a problem?
in windows 2003 server, with DNS server I have a field called "wlc2112" with IP address 1.1.1.1
as mentioned by Scott previously, I went to the mmc certificate snap in, and under trusted root certificate authorities, I have installed the WLC cert there and I could see it there as well.
now if I try to access the WLC GUI from here I am still getting the error message same as the one below:
http://www.vistaclues.com/the-security-certificate-presented-by-this-website-was-issues-for-a-different-website%E2%80%99s-address/
I then followed the instruction and continue to the website, and when I go file --> properties --> certificate, it actually shows the certificate is issued to 169.254.1.1 and issued by 169.254.1.1, with a red cross on the cert itself....... I have no idea where is this come from, so I just want to ask when I try to access the WLC GUI through a web browser, after I type in https://wlc-ip-address, how does the browser know / search for which certificate it needs to look into? I think in my case here it clearly points to the wrong certificate?
also on the server I went to http://127.0.0.1/certsrv and selected "download a CA certificate, certificate chain or CRL" and then "install this CA certificate chain", does this mean I acknowledge to trust the root CA by doing this?
I am not sure what I have missed out but it just does not work for some reason... is there any other places that I need to check/verify?
Sorry for the long writing but any comments would be highly appreciated.
Thanks in advance for your help.

Reader security warning message on pdf page linking

Hi All
I am building, for the 5th year running, an archive of a publications years magazines in pdf format. The pages are linked so that when for example an issue magazine cover is clicked in an index page I have created, it takes the viewer to the appropriate magazine pdf, all of which are stored as seperate files.
This has worked fine up until the introduction of Adobe Reader XI. Now a security warning message popup is generated every time a link to another page is clicked.
"This document is trying to access - page.pdf - if you trust this document then choose Allow if not choose Block"
We can't have this so:
Option One: Combine all the pdfs into one file, thus avoiding the problem but making a 400Meg file which may be a little unwealdy to edit
Option Two: Certify all the pages with a third party validated digital signature.
Question does any know if the Option Two will solve the problem?
I have aqured a test certificate from GlobalSign but it is maked as a test certificate and not to be trusted (not sure what the point of it is then!) and this does not work.
We don't want to pay $400 only to find that this does not solve the problem.
Anybody?
Thanks
Keith

In Adobe Acrobat 9 Pro I use the MArquee select Link Tool. It looks like a chain on the Advanced Editing toolbar.
Then the pages are linked using Open a file , or Go to a page view.
I am beging to think that this ia a bug. Because in edit / prefferenecs / security advanced / Add folder path. When you do this for a particular folder it makes no difference, you still get the Warning message.

FB70 why does system show warning message "enter true account assignment" ?

FB70 why does system show warning message "enter a true account assignment object with revenues" ?
i enter profit center but i still get warning message "enter a true account assignment object with revenues"
what should i do ?
my system have CO-PA .

Dear,
Please see that the profit center which you are entering in FB70 must have segment.
still it gives warning message do worry enter it will post the transaction.
bsrao

Every time I start up Firefox, I receive the following warning/message. Java Script Application. Type Error: Components.classes(cid) is undefined. How do I correct this?

Question
Every time I start up Firefox, I receive the following warning/message. Java Script Application. Type Error: Components.classes(cid) is undefined. How do I correct this?

Do you see a Last 7 days folder?
If not then older history has been deleted.<br />
Firefox 5 doesn't use a time limit to store history like previous Firefox 3 versions did.

Display Warnning message before delete row

i have a table and i added a column and but in it a button that perform delete action
when i press the button a row is deleted but i want to display warning message before deleting for example
"are you sure you want to delete this row ?" Yes or No
If press yes the row will be deleted else no action is taken
how can i do this ?

You can use clientListener to do this.
<af:commandImageLink text="Submit" id="cil1" partialSubmit="true" >
<af:clientListener type="action" method="customConfirm"/>
</af:commandImageLink>
<af:resource type="javascript">
customConfirm = function(event) {
var answer = confirm('Are you sure you want to delete this row?');
try
if (!answer) {
var component = AdfPage.PAGE.findComponentByAbsoluteId("cil1");
..... your action here.....
catch(e) {
alert(e)
</af:resource>
But if there is a event or event listener on the commandimagelink then it will always be called. To avoid that you could remove the actionlistener and add serverlistener and call it through the javascript function. See the "Web User Interface Developer's Guide for Oracle Application
Development Framework" for more info.

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

How do I get rid of the security warning for disc based Flash product

I have a project that use a program called Articulate to turn
powerpoint shows into a more rich flash product with audio, search
capacities, quiz etc. There are multiple sections from multiple
powerpoint files that generate a dozen or so flash files. The flash
files reside in an html shell to allow for navigation. The whole
thing is delivered on disc as a browser based training product.
The problem is that viewing flash from a disc results in a
security alert every time the viewer goes to a flash file. There is
an Articulate theme blog that suggests using a product called
server2go to make the disc function as a server to kinda fool
browsers on the local machine into thinking the disc is a web
server. My client wants the product to allow the users' default
browser. So far, although server2go is supposed to allow this, it
doesn't with the latest version of firefox (client's preferred
browser). I can only get it to work on a select machine or 2 in my
office with IE (server2go default) but it takes forever to launch.
I haven't gotten it to work on any of the client's machines. The
disc (auto launch) just freezes the machines.
Can anyone recommend a better server emulation product, or
tell me another solution to delivering a disc based flash product
without getting the security warning and without making the viewer
change settings on their machine to allow flash to play?
I understand security issues but this makes flash virtually
unusable for this application and I'm dead in the water if I can't
fix it.

Sorry, Ralph has already answered your question. If you need to get your security questions reset, you will have to contact iTunes Support:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

Welcome to Apple Discussions!
Is all the software on your computer up to date?
iTunes
iPod Updater
Also, try The Five R's
btabz

Create a form in Word where the user doesn't get the security warning

I created a form in Word that needs to be sent to external customers. It has some text boxes, check boxes and combo boxes. We are getting complaints from the users that they either don't see or can't deal with answering the question about enabling
the Active X controls. How do I create a form that they can use without having to deal with the security issue? Here's what the current code is behind the form.
Private Sub ComboBox1_Change()
End Sub
Private Sub ComboBox2_Change()
End Sub
Private Sub Document_Open()
With Me.ComboBox1
.AddItem ".edi"
.AddItem "EDI no extension"
.AddItem "Cxml/.xml"
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
With Me.ComboBox2
.AddItem ".edi"
.AddItem "EDI no extension"
.AddItem "Cxml/.xml"
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
With Me.ComboBox3
.AddItem ".edi"
.AddItem "EDI no extension"
.AddItem "Cxml/.xml"
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
With Me.ComboBox4
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
With Me.ComboBox5
.AddItem ".edi"
.AddItem "EDI no extension"
.AddItem "Cxml/.xml"
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
With Me.ComboBox6
.AddItem ".edi"
.AddItem "EDI no extension"
.AddItem "Cxml/.xml"
.AddItem ".csv"
.AddItem ".txt"
.AddItem ".xls"
.AddItem ".xlsx"
End With
End Sub
Private Sub CheckBox1_Click()
End Sub
Private Sub CheckBox2_Click()
End Sub
Private Sub CheckBox3_Click()
End Sub
Private Sub CheckBox4_Click()
End Sub
Private Sub CheckBox5_Click()
End Sub
Private Sub CheckBox6_Click()
End Sub
Private Sub CheckBox7_Click()
End Sub
Private Sub CheckBox8_Click()
End Sub
Private Sub CheckBox9_Click()
End Sub
Private Sub CheckBox10_Click()
End Sub
Private Sub ListBox1_Click()
Load
End Sub
Private Sub DTPicker21_CallbackKeyDown(ByVal KeyCode As Integer, ByVal Shift As Integer, ByVal CallbackField As String, CallbackDate As Date)
End Sub

Hi,
Did you get the security warning in Outlook or Word?
Could you please provide a screenshot about the warning to help us understand the problem?
In addition, please have a look at this link and check if it applies to the issue:
http://www.slipstick.com/how-to-outlook/disable-unsafe-hyperlink-warning-opening-attachments/
If this is the case, please try to use the following registry value to disable the security warning:
HKEY_CURRENT_USER\Software\Microsoft\Office\xx.0\Common\Security
DWORD: DisableHyperlinkWarning
Value: 1
xx.0 is the version of your Outlook. 12.0 is Outlook 2007; 14.0 is Outlook 2010; 15.0 is Outlook 2013.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

WDY_CTLR_EXC getting the following warning message

Hi Guys,
I have transported my changes to UAT.In UAT iam getting the follwing warning message.
"no entries for WDY_CTLR_EXC will be imported in this step".
Kindly help if you people have came across these type of warning message.
Regards,
Vijay.

Hi Vijay,
I think the below links might be helpful for you.
How to check if repository objects or customizing was transported - Basis Corner - SCN Wiki
Use of SMODILOG table used to find the customer... | SCN
Problem while Importing Transport Request | SCN
Regards,
Rama

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

How do I disable the "Security Warning" - encrpted script message when I log in to a website using https ? If I cannot get the website owner to change it's code

''dupe of https://support.mozilla.org/en-US/questions/1027400 - locking''
Whenever I log onto a website via https, I get this message and am unable to have Firefox save my password for the website.
Another user asked this question and it was answered, however, the user was asking in the context of his own website where he was able to change the code.
I am unable to change the code for this website but would like to disable this message and have Firefox remember my password for the user id I type in.
Whenever I log onto a website via https (including my website), I get this message:
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information? This is followed below with two boxes, "continue" and "cancel".
In order to connect with the website, I must click on "continue" each time I log onto the website. HOW do I permanently DISABLE this message?
Chosen solution
Firefox gives that error because the page is on HTTPS but your form action is HTTP:
<form action="http://eclipse69forum.com/index.php?app=core&module=global&section=login&do=process" method="post" id="login">
Can you change that to HTTPS?

There is a disconnect here: if the form is being submitted securely, then you would not get that message. So although you may be looking at an HTTPS address in the address bar, Firefox is warning you that your username and password are going to an HTTP address and being transmitted in the clear rather than being protected.
That's definitely not the normal way to set up a login page. Do you want to give the URL of the problem login page to get specific comments? Without knowing more, it sounds as though it isn't designed for secure logins and you may be wasting your time accessing their login form using HTTPS.
Anyway, to answer your question, I don't think there is a way to disable that warning.

Why is the security warning messages menu deleted on firefox 4?

Similar Messages

Maybe you are looking for