Why is the server so slow?

When I play slots there is a delay to re-spin; has to submit to server

Try this if you haven't yet:
http://forums.ni.com/t5/LabVIEW-FPGA-Idea-Exchange/Turbo-Boost-the-speed-of-FPGA-compiles-under-Wind...
In my experience, taking advantage of Intel's Turbo Boost (my PC has i5) reduced compile time from 85 minutes to 45.
I'm currently testing Cloud Compiler and it took 110 minutes. How can Cloud Compile Server be the slowest compile?

Similar Messages

Why is the refresh rate slower in lab mode? photoshop cc 2014

hi
why is the refresh rate slower in lab mode?
for example i load an image , rgb , ad an adjustament layer -> curve and i start to play with curve -> the refresh is instantaneous (i mean the image become more dark or lighter instantaneous )
but if i load an image -> conver in lab mode , the refresh rate is slower
i tried cs6 too, same behavior
ps how can i have an email to notify me that someone answer to this discussion?
thanks

hi
there is nobody can check it?
under windows 7 or 8
thanks

Why is the WIFI so slow on my 2011 MBP? its getting frustrating

why is the WIFI so slow on my 2011 MBP? its getting frustrating

Hi Jeff,
Can you elaborate on your issue a bit further. What is "slow" in your approximation? Tell us about the environment you're in, what type of router, band and channel. How many other wireless routers does your machine pick up? Is it slow other places with wireless or just this current location? New issue, ongoing?

HT201263 An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

Have you tried resetting your iPad? You may have to restore again if there was a problem.
Try the reset first.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Initial RMI call to the server very slow

I have an RMI client who is trying to connect to an RMI server.
The server is behind a physical firewall, i think its netscreen, during the first call of the client, it is registering itself to the remote object in the server, the call takes up aroung two-three minutes to complete, after that, the succeeding remote method calls are fast, why is this happening?
need help on this

the call takes up aroung two-three minutes to
completesorry, i meant the client takes two-three minutes before it was able to call the method, once called, the method proceeds normally, then the succeeding calls are not that slow anymore

Why is the library so slow to upload to iCloud?

Hi there,
After a bit of hassle getting Photos to accept all my pictures from iPhoto I thought it was all fixed and ready to go to cloud storage so that I can have the same library on iMac, Macbook Pro and my iPhone.
My photo library isn't that big, about 40Gb (4607 items) but it seems to be taking forever to upload to iCloud.
My broadband speed isn't great (Around 6.5 MBPS download and around 0.7MBPS upload) but after several days my Photo library states that it is uploading 4570 items. When i try to run photos from my macbook there are only a few photos on there.
At this rate I'll probably die of old age before all the photos are in the cloud and bounced back onto my macbook & phone.
Other than slow broadband speed and apple being busy with people like me uploading, are there any other reasons why this is taking so much time? Bad settings anywhere?
As another example my iMac has been on for a couple of hours today and the Activity monitor states that 887.2MB has been sent to the cloud. That's pretty damm slow isn't it?
Thanks

Stu Ducklow
Why is my finder so slow to update. For example, if I
download a file (using Safari), I can't find it on
the desktop. If I use Find at the Finder level, it
says it's there, but I can't see it.
Same thing happens with Mail, trying to attach a PDF
I just made. Mail can't see it.
I love all the wondrous glitz of OSX, but wouldn't it
be nice if it could do the basic stuff as well as
System 6? At the rate Apple's going, we'll probably
get a breathless announcement about a spanking-new OS
called Snail, which doesn't do anything but look
pretty.
Stu,
Did you ever get an answer to this? My finder is pathetically slow to update, a minor irritation a dozen times a day. System 9 never had this problem. Is there a way to get my expensive computer to do this simple task? Is there any news on this?
thanks,

Why is the finder so slow to update?

Why is my finder so slow to update. For example, if I download a file (using Safari), I can't find it on the desktop. If I use Find at the Finder level, it says it's there, but I can't see it.
Same thing happens with Mail, trying to attach a PDF I just made. Mail can't see it.
I love all the wondrous glitz of OSX, but wouldn't it be nice if it could do the basic stuff as well as System 6? At the rate Apple's going, we'll probably get a breathless announcement about a spanking-new OS called Snail, which doesn't do anything but look pretty.

Stu Ducklow
Why is my finder so slow to update. For example, if I
download a file (using Safari), I can't find it on
the desktop. If I use Find at the Finder level, it
says it's there, but I can't see it.
Same thing happens with Mail, trying to attach a PDF
I just made. Mail can't see it.
I love all the wondrous glitz of OSX, but wouldn't it
be nice if it could do the basic stuff as well as
System 6? At the rate Apple's going, we'll probably
get a breathless announcement about a spanking-new OS
called Snail, which doesn't do anything but look
pretty.
Stu,
Did you ever get an answer to this? My finder is pathetically slow to update, a minor irritation a dozen times a day. System 9 never had this problem. Is there a way to get my expensive computer to do this simple task? Is there any news on this?
thanks,

Why is the IDE so slow?

Why is the Cocoa Integrated Development Environment so slow for the iPhone?
Is there anything I can do to speed it up?
For example, when a break point is reached it frequently takes many seconds before moving the cursor over a variable will cause a popup window to occur. Under the BlackBox/Component Pascal IDE the code runs just as fast whether there is a breakpoint (HALT) or not. Breaking happens instantaneously and one can example all the variables relevant at that point without any delay.
I can edit compile and run applications within about 3 seconds (for a minor change) in BlackBox whereas with the iPhone I can get a can of soft drink from the refrigerator and drink half of it before the application commences running. N.B. I use the same machine (MacBook 2GHZ) for both development environments, one runs on the Apple side the other on the MS Windows side (Parallels Desktop).
Is the slowness due to "a whole lot of messaging going on" or what? It really slows down what I can accomplish in a day. Rather than trying 10 or 20 things I can only try 2 or 3. Is there anything I can do to speed things up?
I believe that a lot of the CPU time is going to 'aids' such as syntax coloring, parenthesis matching, and a host of other behind the scene stuff that I really don't want or need.
-Doug Danforth

ProjectBuilder/XCode has never been able to keep up with my typing speed no matter how much processor I throw at it; something CodeWarrior was able to do (with infinitely better syntax highlighting and code browsing) on a 100MHz Performa. It's just a nightmare project full of NeXT era cruft nobody's taken the time to clean up since it's free.

Why is the Server service paused?

Trying to network my T43 laptop running Win XP, SP2, all updates current.
Using Norton firewall, which has been adjusted so T43 can print on the desktop
printer as well as send files to the desktop's shared folder.
On startup the Server service is being "paused" and therefore other
computers on local wireless network cannot get to files on this computer. I
have reviewed everything I can think of but am unable to determine where this
command is really coming from.
Can anyone offer suggestion on what to try? (I did turn off Norton firewall
and activated Windows firewall but had same result.)
Following is entry from Event Viewer
Event Type: Information
Event Source: Service Control Manager
Event Category: None
Event ID: 7035
Date:  4/2/2008
Time:  15:33:33
User:  XXXXXX\Me
Computer:       XXXXXX
Description: The Server service was successfully sent a pause control
In Server Properties display, the folloiwing:
--General tab
    Service name: lanmanserver
    Display name: Server
    Description:   Supports file, print, and named-pipe sharing over the
network for this computer. If this service is stopped, these functions will
be unavailable. If this service is disabled, any services that explicitly
depend on it will fail to start.
    Path to executable: C:\WINDOWS\system32\svchost.exe -k netsvcs
    Startup type: Automatic
--Log On tab
    log on as Local System account
--Recovery tab
    All 3 failure conditions set to Take No Action
--Dependencies tab
    This service depends on the following system components" <No
Dependencies>
    The following system components depend on this service: Computer Browser
In other words, everything here seems to be set up as expected. The service
does in fact start. Something else is stopping it. Finding out what process
sends the Pause command is not so easy. Any kind of trace or debug I can
impose on startup to see where this might be coming from?

I have had this problem too, and I resolved it.
Normaly network connections in your IBM / Lenovo computer is managed by third part software called IBM / Lenovo Access Connections. Service is paused because of security settings in one or more of your connections profiles who is managed by this software. To resolve it, you need to enable file and printer sharing in your location profile managed by software mentioned above.
I have an old ThinkPad T43, so instrucions bellow is for an old IBM Access Connections.
To resolve this, do the following:
1) Open "IMB Access connections" ;
2) then click on "Manage Location profiles...";
3) in "Manage Location profiles" window choose your default connection profile (what you are using everyday);
4) double click on it (or click on button "Edit..." bellow);
5) new window appears; in this window there is many tabs;
6) choose "Security" tab (to find it, you may use horizontal arrow buttons in the right up corner in this window);
7) then tick off an option "Disable file and printer sharing" (option should be clear!);
6) click "OK";
7) read bellow ***
8) click "Close";
9) restart your PC (to make sure all is ok).
*** You should apply these instructions (from 1 to 7) for ALL your "IBM Access Connections" / "Lenovo Access connections" profiles, if you do not want allow them to manage your files and printer sharing security. As result Server service automatically will not pause in case of choosing another location profile - service will continue to work normally in all profiles.
Good Luck!
GMH from Latvia,
ThinkPad lover for years

Why does the server hang while starting up or the "csdb recover" hang when it is run?

Sometimes after iPlanet Calendar Server crashes, the server hangs during
startup or the csdb
utility hangs when I execute the recover
command.
<P>
One possible solution is to delete all of the .share
files in the same directory as the
Calendar Server database. In most cases, the server will successfully start up
again.

When you start up in Safe Mode various things aren't loaded at startup, Bob.
Have a thinbk about which of the following may be involved in your own case:
It forces a directory check of the startup volume.
It loads only required kernel extensions (some of the items in /System/Library/Extensions).
It runs only Apple-installed startup items (some of the items in /Library/StartupItems and /System/Library/StartupItems - and different than login items).
Mac OS X 10.4 Tiger only: It disables all fonts other than those in /System/Library/Fonts .
Mac OS X 10.4 Tiger only: It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501.
Mac OS X 10.4 Tiger only: It disables any Login Items.
(from http://docs.info.apple.com/article.html?artnum=107392)
Have a look at http://docs.info.apple.com/article.html?artnum=106464 for some more possibilities.
You may find it worth while using System Prefernces/Accounts to creat a new admin user account and see if the problem persists with it. THis may help you narrow down the problem further.
Cheers
Rod

Why is the API so slow?

I'm using the API with PHP and it's gotten incredibly slow over the last month.
Simply getting 1 AdGroup takes 30 seconds. Get the Ads that go with the AdGroup, another 30 seconds. Update the Ad, another 60 seconds.
I'm using the PHP library for V9. My calls look like:
$proxy = $this->getClientProxy($this->campaign_service); // calls ClientProxy::ConstructWithAccountId
$request = new GetAdGroupsByIdsRequest();
$request->CampaignId = $campaign_id;
$request->AdGroupIds = array($ad_group_id);
$result = $proxy->GetService()->GetAdGroupsByIds($request);
Why is it so slow?

Hello,
Thanks for reaching out. It is unusual for these requests to take that amount of time to return. Are all of your calls consistently taking 30+ seconds to return information at this point? Are other service endpoints seeing the same
behavior (reporting, bulk, etc)? Are you running the calls via a server solution, or are they being run locally?
These details would help us to isolate where the latency might be occurring.
Thank you,
Matt

Why is the iPad so slow on the net?

Internet (and phone etc) all on cable with nominal download speed of 60Mb (reduces a bit when going to computer via router).
Have added wireless access point (rated 300Mb) so I can connect the iPad (bought last Friday).
Connections all fine, but the browsing speed on the iPad is painfully slow. I see lots of other comments going back a year or two, so obviously Apple know about this - so why isn't it fixed yet?
I am not very clued up on the wireless system, so maybe I've missed something; I'd like to know what might be causing the iPad to be so slow compared with my PowerMac.

Went to Apple shop in town.
Assistant there said it was the provider's problem, not Apple's; she added that her own download speed was officially 12, but she only gets 4.

Why is the finder so slow?

Ever since I upgraded to Mavericks, the Finder gets very slow to display folders and files, especially in a save window. Any idea why?

I have this problem too. The popup finder window when saving files, is really slow. Scrolling is behaving weird too.
I tried to delete the finder plist, and restarted finder with the terminal command:
killall -KILL Finder

Why is the rendering process slowing right down?

Hi,
I'm rendering a 4 minute clip of Pro Res LT files, there's a few effect on it but right now I'm only rendering the video at 1/4 quality.
It starts rendering fine. Then starts to slow down, and by the time it gets to about 99.35%, it takes hours to render about 0.10 %, still rendering now, has been rendering over night, and is still on 99.54 %.
Every time it renders another frame, it adds another frame onto the amount that still needs to be rendered. And the estimated amount of time left stays about the same - between 3 and 4 minutes (not true).
I'm working on a Mac, with 4GB of RAM, but also rendering to an external hard drive that should have about 400GB free.
Help please!
Ashleigh

ah! "locate" is a command you can use to search (inside Terminal,) though you should keep in mind that its database is only updated once a week by default, however, you can update it manually whenever you like, which takes a few minutes, using (in Terminal):
sudo /usr/libexec/locate.updatedb
actually, you could always automate that by adding this to the following file: "~/.bash_profile"
[begin --don't include this line]
alias locate='if [ $((`date +%s`-`eval $(stat -s /var/db/locate.database); echo $st_mtime`)) -gt 3600 ]; then echo "locate: db is too old!">/dev/stderr; sudo /usr/libexec/locate.updatedb; fi; locate -i'
[end --that code is all you need, and it needs to be kept together, all in one line]
f.
Note: if you need to create the file, (in Terminal) use:
touch ~/.bash_profile

Why is the macbook so slow at opening pages on the internet ?, Why is the macbook so slow at opening pages on the internet ?

Just got my Macbook this week and was looking forward to the "lightening" fast MAc I had heard of. It is not so ! My old PC wa faster an cost about a quarter of the price !! Am I doing something wrong ?

How much RAM do you have? Is it maxed out? MBP faster when not on the net?
Which browser & version are you using? Could be a browser you're having?
Update your OS. Your system profile confirms you are still using OS 10.8. Use the App Store to see if there is any other software you need to install.
MBP slow wireless and/or through ethernet?
Any devices connected to your MBP?
Remember, you are still under warranty. Take full advantage of it before you lose it!
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Why is the server so slow?

Similar Messages

Maybe you are looking for