Why is the small text blurry on photoshop?

why is the small text blurry on photoshop? i am **** a very small advert for a newspaper! and the text is printing blurry and when zoomed in is appearing all blurry? how do i stop this i only have photoshop and indesign

c.pfaffenbichler schrieb:
If a vector is intact, no flattening has been done. I don't talk about PDF layers, they are a complete different thing. When flattening is done no form or text survives as live vector or live text.
The pdf is X-1, so there are no Layers or transparencies in it, but the text is searchable still.
So I guess you are correct in that no flattening has happened, rather Photohop embedded two images in the pdf and clipped the one with the type.
Exaclty, whe a pDF X1 or 3 is created transparency is flattened and here it can come to unwanted rasterizing of vectors.
How will you create the correct boxes for bleed and crop in Photoshop?
For a newspaper add those will probably be irrelevant as bleed is hardly necessary.
Not at all, it is much easier to assamble files in a greater layout if all boxes are correct.
You know it good enough that this is not the right tool for that task?
Indesign is definitely the preferable tool for the task at hand, but claiming Photoshop cannot output type except pixelated was not proper.
I think in a forum we should not support the use of wrong tools but we have to show the best way to do things correct.
And there are also problems which cannot avoided with higher knowledge like coloured black (not in this ad). Yes, you an me we are capable to shift around the known problems with ads created in Photoshop, but others don't know these problems and will crash.

Similar Messages

  • When I select text, system wide, and delete it, why is the succeeding text then selected?

    When I select text, system wide, and delete it, why is the succeeding text then selected?
    This doesn't happen all the time, but it's happened enough for me to notice it and get super annoyed by it.
    Here's an example. If I have the following text:
    The quick brown fox jumps over the lazy dog.
    And I highlight quick brown and then press delete, I get: (The red shows the selected text)
    The fox jumps over the lazy dog.
    So when I then start typing, more text is removed than I want. Sometimes this effect carries over, so that the next couple words are selected once I start typing.
    It's wonderfully annoying. So I was wondering if anyone else was experiencing such issues or if anyone might have an idea on how to get rid of this problem.
    Thanks.

    Ooops. I haven't updated my sig in a while. I'm on 10.8.2 and it happens on a late 2008 Alu Macbook.

  • Why is the camera so blurry

    ever since i downloaded the new os x the camera has been very blurry

    Nang123 wrote: why is the camera so blurry
    Because something is wrong.  You need to troubleshoot to find what to fix,
    If you have checked that the camera lens cover is not smudged, restart Mac and check again.
    If the problem continues, check more than one other Apple camera app in more than one  user account per http://support.apple.com/kb/HT2090.
    If the problem is exactly the same in all apps and user accounts, reinstall OS X 10.9
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • [X-Fi] Why do the "small things" not wo

    Creative has designed and produced a great soundcard, I think many people will agree with this point. Of course, there are some small problems, but that's ok with such a high technology product (Vista Support, Crackling Problem).
    But:
    Why is the X-Fi not capable of Dolby Digital (respecti'vely DTS) Li've Encoding and you have to buy an external DTS encoder, so you get D/A -> A/D -> A/D converting.
    Why is there no mode-switcher integrated in the driver and I have to use third party tools, which cause problems sometimes?
    Why is there no Linux/Unix-support respecti'vely a Open Source-driver?
    I'm sure there will be some more "small things" people want to get realised. Especially the not existing DTS/DD-Encoding should be done without great technical problems, and also without licence-related problems, otherwise the external DTS encoder wouldn't have been realised that fast. I think Creative just wants to earn fast & easy money.

    You are right... specially the last line in youre post. But i agree with everything you said.
    I think Creative just wants to earn fast & easy money.
    But there is no answer, and dont expect one from CL. As they are sitting home and counting the easy money, and laughing their rich asses off!! "LOL the suckers....Hope we can fool them buy the new Super X-FI pci-e, we?ll promise them to be 00% crackling free."

  • Why does the default text tone play instead of the personalized text tone I have selected for a given contact?

    The selected text tone plays when I check it out on the contact page, but when I receive a text message from this contact the default text tone plays.

    Not me. iPhone or not, it always plays the default sound instead of the custom one

  • Why did the smaller/larger buttons quit working in Mail 3.3

    In Apple Mail 3.3, message toolbar, the smaller/bigger buttons no longer works. The function works using the pulldown menu. I tried reloading mail, and a new tool, but no cigar. Anybody know what's what?
    Thanks
    Dalej

    My bad, I should have said Mail V. 3.2 as that is what I have.
    The buttons I refer to are on the tool bar of a message window. If you don't have them, you can go to the view pulldown menu, then select customize toolbar and drag the
    button to the toolbar of your message window. It looks like a small capital A and a large capitol A. When viewing or writing an e-mail in the older versions, if the message letters were small I could go and hit the large A a few times and the lettering would increase in size, but no more with my upgrade to 10.5.
    Dalej

  • Why cut shapes into text in 3D (Photoshop CS6)?

    Right. Hello all.
    I'm having a little bit of an issue with photoshop cs6 3d function. It's pretty damn good (I'm using it for the first time) and I'm pretty impressed. However, whenever I go through a prelim render to get the jist of what the text I'm working on will look like, it decides to cut a random shape into a specific letter (the letter 'A', capitalised, News Gothic, Caps).
    Why is it doing this?
    I've tried multiple times to start over again after trying to change as much as possible but it still comes back and always comes back affecting the 'A'! Please see screengrab below.
    Help please!
    Thank you,
    juggernautdave

    It's pretty damn good
    *lol* Armies of 3D artists using "real" 3D programs would disagree. That aside, your issue is pretty clear - your contour contains messy points/ duplicate points in that specific corner and it screws up the triangulation. You need to create the text as paths, manually clean them up and extrude the result. Not so good anymore, eh?
    Mylenium

  • Why are the colors in Illustrator and Photoshop so off?

    Hi,
    Let me just start off by saying I have the color mode in both Illustrator and Photoshop set to RGB. Yet, there is a noticeable color difference between a picture on the internet and when I paste it in for example Photoshop.
    Picture from the internet:
    Picture when pasted in Photoshop:
    It's the same thing in Illustrator. And this is not just with pictures by the way, it's affects all the colors I use, which is a major pain in the rear.
    Anyone know a fix?

    Well, my suggestion in post #13, was to help me find out what the cause of your problem is. It doesn’t solve your problem permanently but temporarily, only for the current session of Photoshop or Illustrator by making these programs show your image without applying any color management conversions.  So, you have to do this every time you open such files in these programs.
    If you want to understand what is going on and be in control, you have to go through a lot of walls of text unfortunately .
    I’ll try to explain it roughly but if you don’t understand it you need to read more about color management.
    You are using Safari and this is how its color management  works:
    https://developer.apple.com/library/safari/technotes/tn2220/_index.html
    on that page it says:
    "Important: For images that are not tagged with a color profile, their color values will be displayed on the screen by Safari with no optimization or adjustment for differences between devices in how they render colors. This may result in the colors not being displayed as originally intended"
    This made me think that like most images on the web, the image you are using doesn’t have a color profile. In that case, assuming a certain scenario based on your input, the reason it is displayed differently from Photoshop and Illustrator is because you have a color profile of your monitor used by your system that is different than the color space used for the display of the image. By default RGB Images without a color profile are displayed using  the color space set for the working space in the Color Settings of Photoshop and Illustrator. Also by default this color space is sRGB.  If your monitor was also with an sRGB profile assigned in the system, which is the case with all monitors that come without a color profile provided from the manufacturer, you should have not experienced this problem because Photoshop and Illustrator will see that the color space you want to display your image is sRGB and your monitor is sRGB, and there will be no color conversions because both color spaces, source and destination are the same.  Unless someone else has setup your system ,color management, and installed a monitor profile,  my guess is that the manufacturer of your monitor has provided a color profile installed in your system that is not sRGB.
    When you choose View > Proof Setup > Monitor RGB, this in effect turns off the color management because you are displaying the image in the same color space as the one assigned to your monitor.
    If you want to turn off the color management permanently which will be valid only when displaying images in the sRGB color space, you can assign the sRGB color profile to your monitor. This will show the images on your monitor with the same colors as those displayed without color management in the other applications and choosing View > Proof Setup > Monitor RGB will make no difference.
    Non color managed programs can display the color only in the way your monitor displays it. Color managed programs simulate other outputs on your monitor. The only way to match the display in color managed and non color managed software is to turn off the color managed software. This will display the same color values with the same color in all programs on your monitor.
    The purpose of the color management is to allow the viewer  see the colors as intended (the way the creator sees them when creating the image). Different devices and media output the same color values differently resulting in different color. Therefore, when the viewer uses different device or media the colors if not color managed properly will look different or not as close as possible.
    When you turn off the color management, or even when it is on but not properly applied, which I suspect is the case in your situation, you can’t be sure that the colors you see are as intended. In other words, you can’t tell if an image is supposed to look the way you see it, and you can’t create images providing means that will allow others to see them the way you see them. 
    So, for whatever reasons you want to make colors look the same in all your programs, have in mind that this is valid only on the current state of your monitor, and this also cuts the possibility to see and send to others colors as intended.

  • Why is the embedded form blurry?

    When embedding the form to our website, all text gets blurry and pictures funny with a shadow effect. It looked fine the for a couple of weeks but now it
     's like the picture below. 
    The developer helping us with our web sites says, I quote:
    "The page renders a div with id = "content form". This div get an IE-specific shadow filter through CSS.
    Since this css from adobeformscentral.com there is nothing we can do from Sitecore to remove the shade, but this must be handled where you create the form."
    I really need some help or instructions to pass on to the developer or if there is something I should do to help this problem. It's due to launch as a competition on May 1st, a bit stressed, can't publish it like this.

    The 4/22/2013 release of FormsCentral introduced this problem.  It affects IE versions 6, 7, 8.  We are working on a fix that should be available by Tuesday 4/30/2013 but cannot guarantee the exact date.  I'll keep you posted.
    Very sorry for the inconvenience.
    -DevRandy

  • Why does the zoom keep changing in Photoshop CS6?

    Hi,
    I have just recently bought photoshop, When I use the magnifier, it sometimes zooms on the left mouse button and zooms out on the right mouse button. Other times it dosn't do this. Why does it keep changing and how do I get it to stay on L/R button zoom? 
    I have just created my new site that has many English teachers on Skype All this was done using Photoshop cs6 but I had the problem with the zoom the whole time!!
    Please help me with this annoyance!

    Other times it dosn't do this.
    That’s a bit vague and you do not provide a lot of information, please read
    http://forums.adobe.com/message/4587299#4587299

  • Why do the colors appear different from photoshop when I place a picture in indesign?

    I am new to indesign, and photoshop for that matter. But when I place a picture in indesign the color looks completely different from what it was in photoshop. Is this just a display issue or will it print with the wrong color?

    You have a profile mismatch. Make sure the document and PS file's assigned profiles match. If you are not assigning color profiles then the Working Spaces in Color Settings have to match.

  • Why are the fonts so blurry on iMac 27 in OsX?

    I just got a new iMac 27, my first Apple desktop.
    And I'm sorely disappointed with how fonts look. Sort of clumpy and blurry, as if they are mismatched to the resolution of the screen.
    I tried a number of sizes, fonts, apps, browsers (Safari and Chrome), brightness settings. Even changed my glasses.
    Then I installed Windows 8 in Bootcamp. Perfectly clear fonts on exactly the same hardware!
    I am seriously considering returning the iMac as I'm getting headaches.
    Before I do, I thought I'd ask here if there is something I'm missing and there is some solution?
    Thanks in advance.

    I did call Support, spent 1hr40 with them on the phone, so far have no resolution but the case is still on-going. The only action proposed was to delete the partition and reinstall OS X. This did not change anything.
    After the reinstall I captured some screenshots. Unfortunately this forum does not post the images in their full resolution, so it may not be as obvious when you read it:
    On OS X, using Safari:
    The same website on Windows 8:
    And an article, again first in OS X:
    and in Windows:
    I rest my case.
    Message was edited by: jamullian to reflect the observed resolution not being the same as what is posted.

  • Why does the image go blurry when I export my file to jpeg from Illustrator CS6?

    Hi,
    I have created an image on illusrator CS6 and am ready to save it.
    I have saved it as a pdf format and the image stays as a sharp vector image and not blurry at all.
    But I also want to keep the image as a jpeg. So when I go to export the image from illustrator CS6 as a jpeg, the end result comes out blurry and not sharp anymore, but more jagged on the edges of the image.
    Is there anything I can do to keep my file as a jpeg with it staying as a sharp crisp image?

    The image above is a screenshot of the ai.file
    Above - second image is the screenshot of my export settings
    the 3rd image above is a close up zoomed in part of the image - the edges are jagged and blurry

  • Why does the display look different in photoshop and lightroom

    I am using CS4 and LR2.1. When I open the same picture in both programs the picture in CS4 looks dull and washed out. My color space in both programs is srgb (I send all my pictures to Miller's for printing). Any Idea why and what setting I should adjust.
    Thank you in advance for your help,
    Allen
    Edit/Delete Message

    Your color settings are not the same, or something is broken with your display profile that one application is trying to fix up (but that should give you a warning).

  • Why is the text so small on this web site???

    Why is the message text so small on this web
    site?? It is almost impossible to read!!
    The navigation text is tiny as well, I cant
    read a word of the navigation bar at the top
    of this page.
    If this is produced using Netweaver, I am
    very concerned.
    Come on SAP, this needs addressing.

    On my computer it is OK, but I have seen this on other machines too. But this surely is not connected to NetWeaver, as you surely knew
    I'll forward this to SDN personell.
    Regards,
    Benny

Maybe you are looking for