Why is the sound low on my Ipod? When I have my earbuds in I have to have the volume almost all the way up. I have the volume limit maxed out also. Same thing when I plug it into a boombox
Why does my Ipod play at a low volume? When I have my earbuds in I have to have it at almost full volume, and when I plug it into a boombox it doesn't play as loud as the radio or a cd. I have the volume limit turned all the way up in the settings also. All my songs on my Ipod were burned from cd's(if that helps) thanks.
Sorry, I have the same issue.
So far searching threads here is not coming up with anything.
I have set aside my restore discs, to start the process of ripping the drive clean.
I tried Omni Sweep, but all it did was confirm the space I counted up.
Still does not show what's hidding. 113GB worth on mine.
That software really boggs down the system.
I could not load an email with it running.
Good LUck as well.
Similar Messages
-
I just installed iTunes 10 and all it does when I open it up is show me the software license agreement, and if I click either "accept" or "decline" it closes up and does nothing else. It does the same thing when I try to play mp3 files, just opens up the license agreement and nothing else. It also doesn't recognise my iPod touch when I plug it in, thinks it's a digital camera. Please help! (By the way, I have Windows XP SP3.)
Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR. -
Why isnt my sound working on my ipod
why isnt my sound working on my ipod only when i have headphones in
If you confirmed the headphones are not the problem.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!
This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly. -
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or
what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue. -
After I updated my iPhone4 into iOS6, all my applications crash on launch. I tried restoring it but same thing happened
you'll have to set it up as a new phone. You have no choice. If you've been using your phone as recommended, you should have little, if any, data loss.
-
I have my Macbook Air hooked up to a Thunderbolt Display, is there any way to power on the Macbook Air using an Apple USB keyboard plugged into the Thunderbolt display? I would like to be able to keep the Macbook Air in the Archbook dock and not have to open it to power it on?
Thanks for any advise.SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
My iphone was stolen, I used find my iphone app, and found that it was offline, however when tried locking mode option, I pressed remove device by mistake. Is there any way I can restore the iphone to my icloud/ apple Id again? No manual backup on laptop
The phone will automatically re-appear when it connects to the Internet. However, don't get your hopes up, as thieves know this & will make sure your phone never re-connects so you can locate it.
-
Why do Orange and EE blame Apple for the delays in unlocking my iPhone. 10 months now. What is the exact process that these companies have to go through to unlock an iPhone and is Apple in any way to blame for the delays.
Indeed how long does Apple take to carry out its part of the process.
It seems to me that Orange are just trying to stall me despite the fact that I am out of contract with them now. I originally paid to have the phone unlocked back last November. This was never done.
I have phoned them numerous times over the last two months but still they haven't done it. Can anyone advise me and has anyone had similar problems with them.
ThanksI certainly understand that only Orange can unlock my phone. My annoyance is that they blame Apple so I am keen to know what exactly is Apple's involvement.
I presume that Orange have to tell Apple that the phone has been authorised for unlocking by Orange and that Apple then notes that in some way on iTunes so that the user can then complete the process on iTunes.
What I would like to know is how much time Apples part in this process takes.
I would also like to make contact with others who have had similar problems.
Many thanks -
I sent my Iphone 5c in for repair and when they sent it back my sim card wasn't in it is there any way i can have them send it back or do I need to get a new sim card for it?
You'll have to get a new one from your carrier. I believe the shipping instructions for mail in service explicitly tell you to take it out as you will most likely not receive the same phone back. Apple doesn't repair most phones, they replace them.
-
I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli
You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.
-
HT2693 I have iTunes gift card but numbers is removed and i try but no way and I have the card
I have iTunes gift card but numbers is removed and i try but no way and I have the card
http://www.apple.com/support/itunes/contact/
email them and they should be able to take care of you :-) -
I cant dowload the itunes i use win 7 with 64 op i get all thge way through then at the last step HRESULT:0x800736FD shows up and cant go any further. please help
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My itouch won't charge. I keep getting a warning that the battery is running low. When I plug it in nothing happens. Thanks.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to read XML file and update the data in MS CRM 2011?
Hi Folks, Can anyone please help me finding some references to read XML files and push the data to MS CRM 2011 preferably by using a console application. Please let me know if any ways of handling it in simple ways. Thanks, Sri
-
Allow Networking Disabled when Webpage Renders in an App Hosting Webbrowser Control
Was there a change with Security for Network requests for Flash player 11.4? I have a Windows Application that hosts the Webbrowser Control. When browsing webpages with Flash files that load external requests, the Flash ActiveX control does not load
-
Dear sir I hav created one adobe form in SFP also i connected webdynpro using interactive form tool and template source i given the form name its working fine. while im executing adobe form im giving one material as a input . its working fine. after
-
Configurator Hangs in Oracle Linux
I'm trying to simply install and configure Essbase Server (11.1.2.2) in a Linux environment. I thought Oracle Linux was compatible, but I cannot for the life of me get the configurator to do anything in Oracle Linux. I've tried installing and configu
-
JDeveloper 10g Release 3: Oracle ADF Tutorials bugs
I downloaded the latest release of JDeveloper 10g Release 3 together with the tutorial and scripts setting up the SRDemo schema yesterday but running the scripts is giving a lot of errors. Any help?