Why is the "start time" in my screensaver preferences grayed out?

I am attempting to adjust the timing of a particular screensaver, however, the START AFTER menu at the bottom left is grayed out. I am running OS X 10.8.4. Any help would be appreciated.

Is this your personal computer, or is it administered by someone else? Is there a preference pane named "Profiles" in System Preferences?

Similar Messages

Why is the music list for my ipod classic grayed out in itunes?

why is the music list for my ipod classic grayed out in itunes?

I have a similar problem. Originally, my iTunes advanced setting was set such that a shortcut to the song was copied into my music library so sometimes copying songs to my iPod resulted in them being grayed out. I changed that setting some time ago and haven't had the problem until recently.
I don't know what to do. here's the situation:
     1. I have a song that is stored on my file system within My Documents. (it was purchased via Amazon)
     2. Through iTunes I choose the File | Import file to library (or some text like that)
     3. I navigate to the location of the song
     4. I import it.
     5. I can play the tune from the music library or from an internal PC playlist.
     6. I then attempt to copy the song to my iPod. When I do, it appears in the iPod's playlist grayed out.
I have done those steps countless times for dozens of songs without a problem. Even others that I've purchased through Amazon. What is so different this time? I should mention that this problem NEVER happens if I buy the song through the iTunes store. Only if I buy it from another source (e.g. Amazon). WHY ???

Why is my 'start private browser' under "Tools" option grayed out?

When I click on 'Tools' from the browser screen, the 'Start Private Browser' option is grayed out.

Are you sure that it isn't a grayed "Stop Private Browsing" ?
See also:
* [[Private Browsing]]

Why are the NI-DAQmx Base for LabVIEW options grayed out using custom install (with Action:Skip)?

I'm trying to install NI-DAQmx Base 3.7.0 for LabVIEW 2013 (LV is installed). When I try Standard Install, it doesn't install for LabVIEW (only the Common and C and USB tools), but gives a successful installation message.
When I try Custom Install, all of the "...for LabVIEW 20XX" options are unchecked, grayed out and the Action says "Skip".
I'm trying this on a 2011 MacBook Air 11" running OS 10.9. LabVIEW runs fine.
Thanks for any suggestions.
Solved!
Go to Solution.

Hi,
OS 10.9 is not officially supported by NI with the DAQmx Base 3.7. This information is from the description of the driver (http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/):
OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
So this seems to the be the problem. Either you choose another OS version or wait for a new driver which supports 10.9
Regards,
Michael

Why does my LG Cosmos 2 calendar change the start time to the same as the end time?

This does not happen all the time but often enough to be a pain. When I enter a new appointment in the calendar sometimes the phone changes the start time to what I entered as the end time. I thought maybe it was me but it happened twice today and I watched carefully to make sure I was entering it correctly. I was and it is the phone making the change. How do I fix this?

Hi AyaniB
It's been doing it for some time. It seems to be random in occurrence. The day I made the post it happened three times. Since then I have been watching carefully and it does not seem to have happened again. Am I missing any phone updates or anything? How do I check that?
Thanks for your help.
Dave Zamzow

How to edit the starting time for clips in properties?

Hello there ,
I’m testing the CS5 Audition right now and find it great except for one thing:
In the properties for each clip there is a starting time. But it just can’t be edited!
I can change the starting time of the whole session – yes.
But not the ones of the individual clips. Only by moving them around and that is not very precise.
Is there a way to edit this starting times for the clips by typing in numbers?
Thank you :).

AAUser777 wrote:
But wasn't that easier before?
Do I have to save any time I make a change?
As far as I'm aware, you've always had to save changes to metadata to make them permanent!
One more please:
Can't I group Clips and move them together anymore?
One more thing please:
Many people say that CS5 is worse than 3.
Why are all those people bothered?
No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.

I'm trying to have the end times shows up when I print my calendar from the month view. As of now, when I print in the monthly view, it only gives me the start time of a meeting.

I would like to have the ending times shown on my monthly calendar. As of now, it only shows the start time. The end times show up on the weekly calendar, but I don't want to print from the weekly view.

Hi,
I see two issues,
1. the url is not correct for the image, www.mountjay.com/Home/MountJayDesign.jpg
2. meta property should go in to head section, at the moment, it is under body (if you insert the code as html). go to page properties-> Metadata-> head. Paste this here, and check the site again,
Please let me know if you have any other query.

Why is the boot time on my mac pro 2010 slower than my 2010 core 2 duo 13 mbp?

Why is the boot time on my mac pro with clean install of lion around 34 sec on my mac pro 2010 2.8 quad core, when it is only around 17 sec on my 13 mbp 2.67 core 2 duo?
The mac pro uses around 13 seconds from i hit the power button til i hear the chime and see the grey screen.
Is it because it uses time to find the wireless keyboard, trackpad and cinema display?
Mac pro has 16 gb ram and 240 gb ocz agility 3 ssd, macbook pro has a intel 120 gb ssd (320 i think) and 8 gb of ram, so the mac pro has more umpf....

Well it might take a little longer since POST (power-on self test) needs to check more memory.
But try doing a smc and pram reset and see if that helps.

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

Need a script to change the start time of meetings set by someone else...

Hello,
I have a series of events that someone else created and the start time is off by 1 hour in my timezone. Is there a script available to run and change these times or do I have to delete them and manually create them myself?

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

Change the start time of track 1

Hi, fairly new with waveburner but spent about 2 hours going through all the windows so i've got a good idea about the layout and where everything is.
Goal - to remove the 4 second silence at the beginning of the cd. There is a 2 second pause, and 2 seconds before the audio kicks in.
I recorded a dj mix and imported from logic into waveform. I made my track edits, titled all my tracks, added my efx and automation adjustments and just burned my master cd. After further review there is a 5 second delay before the first track.
I zoom into the timeline and it appears the audio sample is located and starts at 4 seconds. There is by default a 2 second pause for the first track. I have tried to change the start time on track 1, move the entire sample, and create a new track on the 5 second marker and delete the first track but i can't move get the first track to start at the 4 second point.
Here is a screenshot - http://kennygrant.ca/wp-content/uploads/2010/01/kenny-screenshot.gif
totally frustrated as the file i bounced did not have a 4 seconds of silence, so i'm totally confused.

What I ended up doing John is just simply deleting the original events from iCal then I went in to Outlook and manually changed the start/stop times of each event then went into the IMAP Calendar folder, clicked on that event and added it to my iCal. Thats sort of the process I use for getting my events to from Exchange to iCal anyway (can't wait for Snow Leopard) but that did the trick for me for these few items that were off. Fortunately I don't expect any changes from the author.
Thanks for responding!
JimN

Where is the start time setting in CC 2014.2?

Cant find the start time setting for the timecode in my latest version of Premiere.
thanks
Phil

Found it, its in the sequence tab. rightklik and there it is.

Why is the "start time" in my screensaver preferences grayed out?

Similar Messages

Maybe you are looking for