Why is the svn failing?

No matter what front-end client I'm using the svn fails after about half of it has finished.
svn: In directory '/Users/ninja9578/Desktop/LiveRuntime/LiveRuntime'
svn: Can't open file '/Users/ninja9578/Desktop/LiveRuntime/LiveRuntime/.svn/tmp/text-base/main.cpp.s vn-base': No such file or directory
Why is this happening? The svn is set up fine, it works on 100+ PCs, why can't OSX's svn get it?

What is it you're trying to do? Check out? Check in? Update? Revert? Without knowing that, it's a bit tough to figure out what the problem might be.
charlie

Similar Messages

  • Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

    AdobeReaderDocumentCouldNotPrint.txt
    Glyn Price Tue 17 March 2015
    Why should Adobe Reader fail to print because of settings
    in the Edit/Preference?
    Adobe Reader XI Version 11.0.10
    MS Window 7
    File > Print > Print
    I got the error message:
    The document could not be printed
    I googled this error message and used the following
    solution that worked i.e. it then printed successfully.
    Edit >  Preferences
    Category: Security(Enhancement)   'Enable Protected  Mode at Startup'
    It was checked, changed it to unchecked.
    Category: Documents    'View documents in PDF/Mode'
    It was set to 'Only for PDF/A'
    Set it to 'Never'
    Exited Adobe Reader and restart it. Then it printed.
    I had a look on another computer system (Adobe Reader XI Version 11.0.10
    and MS Window 7) and on this different computer I could print
    without doing the above two changes.
    I'm a bit puzzled. Why preferences on one system were not
    needed on a different system?

    Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
    There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
    Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
    When it's time to do music, log out of your usual account and onto the new one.
    When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
    This governs whether the drivers go in root/library or root/Users/your name/library.
    If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
    But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
    To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
    There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
    In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

  • Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

    SUMMARY:  I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
    RESULT: I can not accurately get the passing/failing status from the course.
    QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
    OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
    BACKGROUND:  the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API...  In other words the SCORM API receives the same exact commands when publishing in both modes.  "THIS IS WRONG"
    why is the wrong?  IF REPORTING; incomplete/complete ;  the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
    DEMO #3> SHOWS THE PROBLEM
    About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
    DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
    PASS: (PROBLEM)
    Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
    FAIL: (CORRECT)
    Failure gets sent to the database on the last screen with "completed"
    DEMO 2 (Report status  [Complete/Incomplete  Pass/Fail]   has no impact on commands sent to scorm api):
    SETTINGS:
    PASS: (CORRECT)
    Very Last page gets sent to the Database
    FAIL: (PROBLEM)
    NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
    DEMO 3:
    Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
    SETTINGS:
    PASS: (CORRECT)
    Very Last page gets sent to the Database with a 90% passing with "completed"
    FAIL: (PROBLEM)
    LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
    (IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
    this is WRONG ....REALLY WRONG becuase I am trying to report
    "COMPLETE/INCOMPLETE" for 100% slide views
    PASS/FAIL OPTIONS:
    OPTION I CAN PURSUE?
    SO WHAT CAN I DO?  YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
    ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
    QUESTION TO ADOBE?
    SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
    MORE INFORMATION
    HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
    Thanks,
    DOUG LUBEY OF LOUISIANA
    www.douglubey.com
    OTHER WEBSITES:
    http://forums.adobe.com/message/3332035
    http://forums.adobe.com/message/3122315
    http://forums.adobe.com/thread/712502?start=50&tstart=0
    http://forums.adobe.com/thread/800570
    http://forums.adobe.com/thread/720121
    SEARCH ENGINE REFERENCE:
    CAPTIVATE SCORM SUCCESS_STATUS
    captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
    scorm 2004 captivate cs5 success_status incorrect
    scorm 2004 captivate cs5 reports success_status incorrectly
    scorm 2004 captivate incorrectly reports pass/fail
    scorm 2004 captivate 5 incorrectly reports pass/fail
    scorm 2004 "captivate 5" incorrectly reports pass/fail
    captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
    captivate does not work properly when working with completed status.
    CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
    CAPTIvATE 5 cmi.completion_status
    and cmi.success_status does not work independently with scorm 2004.  they both share the same definition.  These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed.   WITH CAPTIVATE 5 they do not differentiate the two.  COMPLETE means PASS and INCOMPLETE means fail..
    I was trying to use "completion_status" as a way to determine when all slides were shown.  So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
    2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
    2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
    CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
    CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
    CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
    CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
    CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
    CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
    CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
    CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

    Hi,
    Here's something I found in a similar situation... hope this helps!
    After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files.  Open the imsmanifest.xml file with a text editor; I like using Notepad++.  Search for the line starting with <imsss:minNormalizedMeasure>.  The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS).  So, if your passing score is supposed to be 80%, edit this line to be:  <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file.  Then select all the files and re-zip them, I use 7-zip for that.
    I found one other weird thing that doesn't happen 100% of the time, so test it.  In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported.  I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score.  No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
    If this works or not, I'd recommend posting your results so others can get some ideas.  Good Luck!!

  • I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

    The title says it all ...
    I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?

    If you are using Help 》updates, it is outdated. You can however go to Product Updates on the Adobe.com website and download your updates there. I am not at my desk b<t when I get back, I'll get the links unless someone else can do that sooner.

  • Why is the latest update failing and giving me this_ U44M1P7?

    See above. Why is the latest update failing and giving me this_ U44M1P7?

    Hi cfosofart,
    Please go follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html .
    Regards,
    Romit Sinha

  • Installing Master collections cs 5.5, the Photoshop failed to install twice and why?

    installing Master collections cs 5.5, the Photoshop failed to install twice and why?

    You need to tell us more about your system. We don't even know what operating system you are using, so this is slightly pointless... Also have a look at the install logs and pick out the information we may need.
    Mylenium

  • HT4519 WHY DOSE MY IPHONE KEEP TELLING ME (CANNOT GET MAIL)THE CONNECTION TO THE SERVER FAILED

    Why dose my iphone keep tellin me when i go check my mail that it cannot ge mail. The connection to the server failed?

    Hi Oskeryogi,
    Welcome to the Support Communities!
    The article below may be able to help you with this. Click on the link to see more details and screenshots. 
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    - Judy

  • This error message appeared.  Does anyone know why this happened?  "You haven't been logged out because the applicationSoftwareUpdateCheck failed to quit-".  Thanks  Mark

    This error message appeared.  Does anyone know why this happened?  "You haven't been logged out because the applicationSoftwareUpdateCheck failed to quit…".  I am using 10.8.4
    Thanks
    Mark

    Apple menu (left on top) and choose "force Quit":
    choose appstore and forcequit.
    Start Appstore again, login, and choose the Update page.

  • "Cannot get mail, connection to the service failed". why and how do I repair it?

    "Cannot get mail, connection to the service failed". why and how do I repair it?

    Thanks. However...these links are to basic troubleshooting.  Good stuff, except I -- like it seems others -- have multiple email accounts coming into their iPhones (my case, iPhone 5 running latest version of iOS) that until this past Friday evening (September 12, 2014).... worked perfectly, then just all stopped.
    In my case, I also lost access to an internet forum I frequent multiple times daily.  All worked fine, until things abruptly stopped working the evening of September 12.
    Seems like anything with a stored login/password got hosed.
    I went into the profiles to make sure my passwords were still there (thought they may have somehow gotten wiped out), but they were there.  I re-entered them just in case, no change.
    Now just this morning, Sunday September 14, two emails from the same (employer) email account have trickled in.  But nothing from the others (gmail, yahoo mail).
    Spouse is having same issue on an iPhone 5.

  • Can't get mail since wednesday.. the connection to the server failed. why?

    can't get mail since wednesday... the connection to the server failed. why?

    Are you connected to wifi?

  • Why does my IPad say "sending the message content to the server failed

    Why does my IPad say "sending the message content to the server failed"  I have checked the wi-fi connection and everything is fine and the email addresses are correct so what's wrong

    Is it an ordinary mail without attachments and links in the body of the email? If so, try deleting the email accountb and setting it up again.

  • I burnt CDs thru Finder and IPhoto. Each time the titles failed to transfer. Why?

    I burnt CDs thru Finder and IPhoto. Each time the titles failed to transfer. Why?

    Where are you looking for the Titles? You're not confusing titles - which are an entry in the Exif metadata of the file - with Filename?
    Regards
    TD

  • Why does the Adobe Updater keep failing?

    Why does the Adobe Updater keep failing? I close my Webroot antivirus app and the update keeps failing for the Extension Manager 6.0.8 Update. The message is "Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7". I cannot retry until the Adobe Updater appears again in the notification bar (lower right of my Win 7 desktop.

    Hi,
    You can try to manually install the updates:
    Product updates
    Helpful Links:
    Installation failed. Error U44M1P7 | Updates
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

  • Why does my Iphone 4s connect to my Wi-Fi network and latter in the day fail to connect until I reboot the router

    Why does my Iphone 4s connect to my wi-fi with a password and latter in the day fail to connect until I reboot the router?  Is there a setting on my router that would avoid this issue.  All my other devices connect alright

    OK so it now looks like on my iPhone 5 iwth iOS 6.1 the LTE network is conflicting with my home wifi (Airport Extreme). At the Apple store the LTE signal is lost in and wifi works like a charm. At home tired all of the "fixes"
    -No security
    -WEP
    -Reset network,
    -Complete reset and reload on the phone
    -ETC ETC ETC
    Just turned off the cell radio and it worked. Turned on the cell radio but kept LTE off and it worked.
    Apple let's get a fix so we can use your "great" phone. I have just received a BB Z10 from work and it seems to work flawlessly.

  • Why does the update keep failing?

    Every day for quite awhile I get a dialogue box saying the update failed. Otherwise Firefox works just fine.

    Try alternate and easiest way by downloading installer
    * getfirefox.com

Maybe you are looking for

  • Error while setting a value into an UDF of type date

    Hello, i get the following error while trying to set a value to an udf with the type "date": Exception from Server: RPC_E_SERVERFAULT This code is used: objDate = CDate(objLineRecordSet.Fields.Item("U_TESTDATE").Value) objDocument.Lines.UserFields.Fi

  • Iphone 4s music won't sync

    I have an Iphone 4s and I updated it to the last iOS (version 7). I also updated my iTunes to the last version, and I had no problems until a month ago: when I tried to sync new songs, It said "cancelling sync". I looked up through the community and

  • I live in Australia, should I use PAL or NTSC settings when creating my DVD?

    I am new to creating DVDs and I am not sure what settings will give me the best quality when I burn it to DVD. I live in Australia, should I use PAL or NTSC settings? Any other hints?

  • How To Convert Multi Page Tiff Image Through open office in application

    I will Appreciate Any Effort Or Reply Which Can Tell Me , To convert a multi-page tiff image in pdf format in application i.e not on desktop using simple open -office but through coding. I doubt if there Exists Ny Plugin Or Separate Library Which Can

  • 3 way color correction preview problem

    I can't see any changes in Visual Mode on my external monitor. Its outputted from a Aja Kona LH. The changes are visible in FCP so I know its working but need to be able to see it on my calibrated HD JVC LCD. I can see adjustments in numerical mode.