Why is the text I type sometimes deleted on my iphone?

Sometimes when I am typing a text, what I have typed gets deleted one letter at a time as if I was pressing the delete key?

If all the basic troubleshooting has been done (reset, restart, restore first from backup then as new) fails to resolve the issue, then take it to Apple.
They will evaluate the phone and if the battery fails to meet the specs, they will replace the device.

Similar Messages

  • Why does the text look blurry sometimes in Firefox 4?

    Whenever I use Firefox 4 on my Toshiba Windows 7 64 bit, it doesn't happen but using it on a Lenovo with 7 64 bit, this problem happens. It doesn't happen everytime I use it and happens on sites that I have visited before that were previously unblurred. I assume this is a issue with FF4's compatibility with my display.

    Turn off hardware acceleration in the '''tools/options/advanced-browsing''' section. This seemed to make it better. Found this suggestion elsewhere.

  • Why is the text bubble to the same person with another iPhone sometimes green and sometimes blue?

    Why is the text bubble sometimes green and sometimes blue when I text to the same person/number who has an iPhone 4s?

    Ebe68 wrote:
    the colors indicate if the message receiver has a iphone or not. Blue for iphone, green for other.
    Not necessarily an iPhone but rather if they have iMessage support at the address you're using.
    If you're using an email address they could have an iOS device or a Mac.

  • Imac OSX 10.8.2 imessage will not show the text I type

    When using message from my imac, the text i type does not appear in the chat box. But this same text I just typed will show up on my iphone and ipad.
    I have looked under preferences and do not see any related settings. Is this meant to be? If not how can i correct this issue.
    Thanks

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Why is the text not the visible in the protected PDF opened on Mac?

    Long story short:
    I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
    Why is the text not visible in the protected PDF opened on Mac?
    (is this bug or a "feature"?)
    Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
    Thanks!

    A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
    B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
    C. Have you checked the file after adding security to see if all fonts are embedded?

  • Why is the text in the resume template invisible?

    using macbookpr laptop and iWork '08 pages professional resume template with a pic, why is the text invisible? I can't get the font to be black....when I preview in print , everything looks normal

    Which version of Pages 08 do you have? The latest is 3.0.3. If you don't have it you cna get it from here Pages 08 3.0.3
    Have you tried oter templates? Do they have the same prblem?

  • When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    Try validating your installed fonts and fixing any errors that show up. To do this see this article: http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/

  • Why is the text going over the image????

    Please refer to video here http://www.youtube.com/watch?v=2rN6Ndm9sFo&feature=youtu.b
    Why is the text going over the image when the text layer is below the image layer?? It is so frustrating.

    Are you sending the texts to his phone number or his Apple ID? It might be that the texts originated from your phone is to his Apple ID and not his phone number and his Apple ID was not registered for the Message app on his phone. So any texts to his Apple ID is not received by his phone.
    Can you receive his texts? If yes, then reply back from what he send you and see if he can receive the texts.

  • Why is the text garbled when I convert a pdf file to  microsoft word ?

    Why is the text garbled when I convert a pdf file to  microsoft word ?

    Hi amedah,
    Could you please try converting any other PDF file with same fonts and then check.
    It might also happen due to use of some poor fonts which result in garbled text.
    Is the PDF scanned?
    Let me know.
    Regards,
    Anubha

  • Why is the text greyed out and small on my Macbook air

    why is the text greyed out and small on my MacBook Air it started after update to Yosemite

    have the same issue

  • Why is the text so small in the log in screen?

    I am visually-impaired.  Why is the text so small in the log in screen?

    You can try to set the display resolution to something like 1024x768 (from the "Best for display") in the "Displays" System Preferences - this will "enlarge" things on the login screen as well as after, (the trick about using the Option key to zoom does not work on the login screen), and then after logging in, reset the Display resolution back to "Best for display".
    To use the "Option" key for zooming -- set in the "Accessibility" System Preference Zoom options "Use scroll gesture with modifier keys to zoom" to Option.
    Not sure, but you might also be able to affect this by changing the default system font. If the above doesn't help, say so and will do a bit more research to see how to change this and see if it also applies to the login screen
    Good luck...

  • My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?

    My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?

    linda mariefromharper woods wrote:
    My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same.  Why are the oldest backups not being deleted to make room for the newest backups?
    It may be in the process of making room.  What version of OSX are you on?    (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network;  Lion has improved it greatly.)
    A clue may be lurking in your logs.  Use the widget in #A1 of  Time Machine - Troubleshooting to display the backup messages from your logs.   That should help you figure out what's going on.  If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
    If you can, connect via Ethernet; it will be 2-3 times faster.

  • Does anyone know if I can change the font on Word to 13? When I highlight the text and type in 13 it automaticall reverts back to 12. I have a MacBook Air.

    Does anyone know if I can change the font on Word to 13? When I highlight the text and type in 13 it automaticall reverts back to 12. I have a MacBook Air.

    hit command + A to highight all text, type in 13 in the font size box.

  • When I open a new document in Pages, the text I type is white on a white background even though the default color is black.  Can someone help?

    When I open a new document in Pages, the text I type appears white instead of the default black color.  I can highlight the text, once I find it, but it will not change to anything other than a light purple.

    Those are the symptoms many users ran into with an early update to Snow Leopard that never was fixed in the updates available through Software Update & not having the iWork apps updated. The problem was not whether or not your system is the current version but how it got there. You must use the combo updater, not the one from Software Update unless it specifically states it is the combo. Software Update will only offer the combo if your system is two or more versions behind. Now that you're running Lion, this generally isn't a problem.
    But making sure the iWork apps are updated is essential. If you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

Maybe you are looking for

  • "Read Only" external hard drive?

    my seagate expansion external hard drive is all of a sudden "read only". it will not let me edit any files using my macbook pro. How do you change this? I have veiwed and edited files from this external drive using my mac before and not had any probl

  • Content moving in ie (not safari, FF)

    I am designing a site and when previewing in FF & safari the text areas are similar in look & ok but when I preview in ie the page text flows off the page & the layout looks much larger. ex:link www.carbon9.com/home.html

  • J2SE File Sender Adapter Error

    Hi Experts, I am doing a scenario on J2SE. Like this: J2SE File Sender -> XI -> J2SE File Receiver. On File Sender adapter, it has an error, like this "ERROR: Finished sending to Integration Engine with error u201Cjava.io.IOException: invalid content

  • How do I make variables from CS.INI available to task sequences?

    So I have created some custom variables in customsettings.ini under the 'Properties' area.  These variables seem to be working in WinPE, but once I reboot and start to install Windows, the variables aren't listed. I also don't see them listed in the

  • Transfer data from Archive to current

    Through a purge event all my data from my date book have been transferrred from my Palm and from the Palm Desktop to the Archive. It's stored in the archive on my computer. How can I transfer all the data back to the Current device and back to my Pal