Why is the time bar in Calendar not corrected for DST?

My iPad has corrected its clock for DST, but the time bar in Calendar is still an hour out. Any ideas?

Mine is correct in the Eastern time zone, US. Have you tried any of the basic stuff? Restart, quit the app, reset the iPad?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the calendar app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

  • Why is the time on my calendar different to that of my phone

    Why is the time on my calendar different to that of my phone

    Hello Mray001
    You may need to enable Time Zone Support on your iPhone to ensure that time is correct no matter where you are. Check out the articles below for some troubleshooting options to resolve your issue.
    iOS: Troubleshooting issues with date and time
    http://support.apple.com/kb/ts3920
    iOS: How to adjust Time Zone Support for calendars
    http://support.apple.com/kb/ht4576
    Regards,
    -Norm G.

  • Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

    I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

    Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
    In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
    The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

  • The time of event is not correct

    on icloud.com event 1:00 h give on iphone 10:00.
    Thank's to answer when possible in french.

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If not then your current library is damaged. 
    If that's the case make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
    Fix #1
    1 - delete  the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder. 
    2 - delete iPhoto's cache file, Cache.db, that is located in your Home/Library/Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot.
    Click to view full size
    OT

  • Time series functions are not working for fragmented logical table sources?

    If i remove that fragmented logical table sources, then its working fine.
    if any body know the reason, please let me know.
    thanks and regards,
    krishna

    Hi,
    is because the time series function are not supported for the framentation content, see the content of the oracle support:
    The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
    Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
    Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
    Regards,
    Gianluca

  • Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    my imac came with lion and don't think it ever span with lion and mtn lion and now maverick not sure if it's a setting

  • The time machine Icon does not does not show up in my menu bar

    The time machine icon does not appear in my menu bar. The desk top icon for the external hard drive is green. I've checked preferances and the time machine is turned on and the box is checked that has the icon appear in my menu. I've turned off the time machine and rebooted and then turned it on and rebooted again. Nothing seems to work. I'm running Mavericks and I have an Intel I5 processor.

    the box is checked that has the icon appear in my menu
    Uncheck it and check it again. Any change? If not, see below.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Why am I being charged data usage during the times my phone is not being used?

    I got a notice on my phone that my number has used all of its allowed data usage for the month.  I looked at my current usage and seen that I was being charged for data usage during the times that I am not using my phone.  I figured it up and it adds up to be more than the amount that you say I am over.  Explain please.

    Ok, what all should I turn off on my 5s and I should get any additional fees waived.  I just got this new phone about a week before Thanksgiving and never got a notice till it was full.  I have never went over before.  I also have never been told that I could be charged data even if I am not using my phone and I should make these changes to prevent this.
    Also, the phone was 2 days late getting to me.  So in addition to any additional fees that I may occur from the overage I should get a credit for the delay in my phone being sent.  Oh, and it probably would have been longer had I not called to see where it was at, which the guy that helped me put in the order and was to follow up the next day with a phone call to let me know what the status was and never did.

  • Report a broken website on firefox help does not work- why does the action bar keep scrolling when i click submit

    the broken website link is not working for me - the "submit toolbar just keeps scrolling until I give up and navigate to another site. recently my leftside bookmarks display keeps highlighing one website ''''''''Live Internet Seismic Server '''''''' even when i don't click on it

    This problem was also reported in question 774215 as a problem that the user encountered after trying to report his primary problem. See https://support.mozilla.com/en-US/questions/774215. FWIW.

  • HT201436 Most of the time my phone as not network connection any goes to voicemail

    I find few big problem on my phone
    -1 Most of the time my phone as not network connection and goes to voicemail
    -2 when I call  and I talk I find the call has been cut the words and also I heard half of the words of the person is calling me !!
    I hope you can help me
    My colleagues from work they thinking I did not want answer the calls
    Is very annoying me
    Thank you

    Do you see any toolbars at all?
    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
    *https://support.mozilla.org/kb/how-to-use-full-screen
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area
    Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
    *if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
    You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Why will the iOS 7 download but not install?

    why will the iOS 7 download but not install?

    IOS 7 stinks wrote:
    I made the mistake go read the internet
    It would take a very long time to read the entire Internet. There are billions of pages.

  • Why is modern times by bob dylan not available on iTunes? I bought it on iTunes.

    Why is modern times by bob dylan not available on iTunes? I bought it on iTunes.

    I believe all iPad Smart Cases & colors for the 2nd, 3rd & 4th gen models have been discontinued except for the Polyurethane Dark Grey color. The reason you are likely seeing them on Amazon & other websites is that they still have stock. If you really want that color, you'll have to go through Amazon (or other) or check/call your local Apple Store to see if they may have the item in stock at that particular store.

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Why is the week number in iCal not ISO8601?

    why is the week number in iCal not ISO8601?

    Error "The serial number is not valid for this product" | Creative Suite

  • I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

Maybe you are looking for

  • Billing Document to be shift to other customer accounts with same invoice number

    Hi, For a long period of time we were maintaining different projects and site of a customer in a single account. Now there is a requirement to distribute individual invoices to respective individual customer accounts for that site or project. But doi

  • Is there a way to dynamically allocate memory in labview?

    In the C programming language, there are malloc() and free() functions which, combined with pointers, allow the user application to dynamically allocate memory.

  • CrossTab

    I have a crosstab with two columns.  The first is a date range ie 10-1-2010 to 11-28-2010 the second is individual dates within that ranges.  Everything works fine except if there is a gap in the date ranges but not the individual date. I need the in

  • New Update Coming Soon!    Here's the Change for 4.4.2  164.55.2

    This new update has allot of things in it and it seems it will be coming out pretty Soon)  if this update is Good and has solved some things might we see it shortly after Moto X  all we can do is Hope.. Here is the the Update Via the Good people at D

  • Blank cds/dvds not mounting, iLife '06 will not install

    After auto upgrades to Tiger v10.4.8 blank cds and dvds will not mount but are automatically ejected. I have a superdrive Sony DVD RW DW -U10A. It will recognize and read cds and dvds that have data. I also attempted to install iLife '06. The install