Why is the timeline numbering scheme wrong

I have zoomed in on a particular video and noticed as I zoom in the timeline numbering is not correct. Here is a screen shot showing the issue:
In case you cannot see the numers the read as follows:
00;00;26;00
00;00;26;15
00;00;27;00
00;00;27;15
00;00;28;00
00;00;28;15
This is what I would expect the timeline to read:
00;00;26;00
00;00;26;50
00;00;27;00
00;00;27;50
00;00;28;00
00;00;28;50
If I zoom in further then the problem gets worse. Has anyone else run into this.
kfitz

Kevin,
That is what I would expect with regards to TimeCode. For SMPT TimeCode, one has 00 (hrs.); 00 (min.); 00 (sec,); 00 (frames). As Neale points out, the 15 Frames is 1/2 of a second at 30 FPS, for NTSC. Those intermediate numbers would be 12 for PAL (in reality, halfway would be 12.5, but we cannot have half Frames in Video.
Good luck,
Hunt

Similar Messages

Why are the only numbers that show up in my "Recents" on the iPhone 3G the calls that I've missed? I used to have all recent numbers that had called, on my old phone.

Why are the only numbers that show up in my "Recents" on the iPhone 3G the calls that I've missed? I used to have all recent numbers that had called, on my old phone. Is there some way to make it so that all my recent calls (in and out) show up on my phone?

At the top there's a toggle between "All" and "Missed". Click "All"

Why is the Apple Weather App wrong for low temps in Albuquerque, NM? Low temp is always displays about 10 degrees too low.

Why is the Apple Weather App wrong for low temps in Albuquerque, NM?
Low temp is always displays about 10 degrees too low.

The reason for the problematic weather prediction in Apple is simple and disturbing at the same time.
1. Traditionally Apple gets its weather data from Yahoo! they do so regardless to the fact that Yahoo is not a weather company, this arrangement has historical reasons (and it has nothing to do with the accuracy or quality of service you as a user are getting from Apple weather).
2. Yahoo! (not a weather company) gets its weather data from the Weather Channel.
3. Weather Channel CEO (David Kenny) also serves as Yahoo board member. So good luck changing the Weather Channel Yahoo agreement.
4. The iPhone build in weather app is one of the world most popular apps, The Weather Channel has no incentive to make the Apple weather app as accurate as The Weather Channel own app.
The result is – easy to use inaccurate weather app

Why was the extended star schema scrapped?

Hi,
BW on HANA takes out the dimension tables and gives us back the original star schema structure.
Now my questions are
- How did the original extended star schema help the old BW on oracle or DB2 systems? I mean what was the need for such a design
- If it offered some kind of optimization .. then why was it scrapped in BW on HANA? Couldn't it have added on to the performance that HANA DB brought?
Regards,
Sam

Can anyone please explain.. ? Krishna Tangudu Thomas Jung Shyam Uthaman .. Any thoughts?

Why is the timeline set to -1?

Hi there,
I have a stage with lots of symbols on, all with their own timelines set to play upon click. When previewing in the browser I notice it takes two clicks to get the timeline going. When I query with a console.log command the console tells me that the timeline begins at -1, so my command (which is an if\else telling to play if timeline = 0) doesnt work. Another then click finds the timeline at zero, as if it had been jogged on a bit.
Has anyone else seen this?
Thanks

getPosition();
Description: Returns the current playhead position of the default timeline. Returns -1 if the timeline has never been played.

WHy is the cursor jumping to wrong position (mainly back to position 1 in the text field) as I try to post comments to peoples posts on Facebook?

I love FIrefox browser and prefer to use it on all my devices, PC, Smart Tv, Phone, Tablet etc. In recent times Iv'e had problems though, everytime I try to comment on a facebook post with each key stroke the cursor jumps back to the beginning of the text field and by the time I finish typing I look up and find jibberish, yesterday I upgraded this RKM Mk902 Android device that I am typing on now unfortunately using Chrome from Anroid 4.2.2 to android 4.4.2 Kit-Kat and thought I would no longer have that problem but the issue is still there. I also have discovered I'm having similar problems with FireFox on my Cube U39GT tablet. As I spend more time on Facebook than any other website I have to find a solution. I thought it may of been one of the addons that i use causing the problems such as Phony but I still get the issue without the addons and after a clean install. Please help me sort out this problem so I can once more use FireFox on my Android devices.

I found this, it seems that there are a few issues in Android as well with the wrong placement for the cursor when you type: [https://github.com/RobinHerbots/jquery.inputmask/issues/465] but since it is only happening in facebook, this is odd.
What this means is that they are working on fixing specific issues like this and I am not sure when this will be fixed.
Does this happen with both keyboards that are offered in the Android Settings?

Why is the time remaining so wrong?

I've noticed over the past few years that the "Time Remaining" estimates from various applications in OS X are increasingly inaccurate - usually the estimate is too long!
This is true for apps from Itunes, to Disk Utility, to <on and on and on>. For example, I was just burning a DVD from a playlist in ITunes and when it started the "Finishing" part - it said "Might be up to an hour". It completed in 30 seconds.
Time estimates are just that - estimates - but do they have to be so wildly inaccurate as to be useless as a guide? I have a feeling nobody in the OS X world has looked at how they update the estimate in a long time, and they do not presently reflect the performance of either hardware or software.
Hey Apple! Update the Time Remaining code! Please?
David

Ignoring the boot progress bar (which I believe is an animation, at least it was in my old Tiger system), the progress bars are usually computed by specifying a range of values to produce a scaling factor and updated by supplying values within that range. The amount of progress is determined by the supplied values within the range.
The segment of code responsible for supplying values is given control on some criteria within the algorithm doing whatever the progress is to measure. There's potentially a lot of variables that can affect when this segment of code is called to update its progress. With disk copies there's how fast the drives are, buffer sizes, what else is running that could interrupt the process, and who knows what else. Certainly you should not expect the progress bar drawing to have a high priority in the grand scheme of things. I'd rather the service be "obsessed" with its primary goal (whatever its service is to do) rather then keeping me constantly updated every millisecond taking valuable cycles from the primary task.

Why is the speaker connection wizzard wrong??

I have creative T7900 speakers, which connect through the 4 different coloured cables. My speakers screwed up earlier so I thought I'd run through the speaker connection wizard again. Why does it only seem to think there are 3 cables? It ignores the grey cable and seems to be telling me all 7 speakers and the subwoofer should be working through 3 and sothe side channels don't work.
Please help me out on this, I'm sure someone must know. Please. Thanks.

Thank you. You would be surprised how many times a Google search will land a person here on the forum, and if the answer is found in a thread, they don't have to take the time to post their question. Glad you got the phone working, and have a nice day.

Why does the iPhone 5c display wrong time?

My iphone 5c currently started displaying the wrong time. I hadnt updated the software yet and thought this was the source of the issue. After the update was complete the time was still incorrect. I have tried syncing my phone with itunes, deleting world clocks, doing hard resets, even wiped the phone back to factory settings. Nothing has worked

Ok, so this is a two fold problem. One just like brad805 pointed out you have to have Settings App > General > Date & Time > if Set Automatically is OFF > ON, if it was ON > OFF > Set Date & Time yourself (but when you bring up this screen to manually set time there is this little reminder about having location services set to ON for it to change time zones correctly). So, leave it Settings App > General > Date & Time > if Set Automatically is OFF > ON, now go back to Settings App>Privacy>Location Services>ON (if off). Once I did this (which mine was off) and I went back to Date & Time instead of it thinking I was in New York, it now showed a very complicated America/Indiana/Indiana... (I suspect this is due to the fact that Indiana has 3 time zones EST, EDT (for the counties that observe) and CDT). Now time is running automatic and smoothly. This was on an iPhone 5c 16 GB running 7.1.2 on Verizon. I hope this helps.
On a side note, its sad that techs in the store cannot read the screen and Apples little notes on it to help you out.

HT4367 why do the serial numbers on the Apple TV have to be so small.

I'll come clean. I'm 50 years old. My Apple TV gave trouble so I went to Apple support. Enter your serial number printed on the bottom of your Apple TV. It is printed on the in black on a black backround. It immediatly made my think of Douglas Adams but then it made me think I'd never be able to read it. I got a magnifyng glass..... no use. I got my wife......... no use. I got a passing 8 year old who read it out without pause.
Thanks Apple. My Apple TV still isn't working but now I feel old as well.

The serial number on the Apple TV is exactly the same size text as all the other text in the menus.

Numbering Scheme for Legal Regulations

When we assign the same Numbering Scheme(1 scheme) to more than 2 legal regulations,
we cannot have more than 2 Export Control Classification Numbers in GTS material master.
（We cannot have more than 2 ECCNs for 1 item.）
We customize bellow,
(Legal Regulation) JPACT1-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT2-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT3-(Numbering Scheme) JPECCN1
In this case, we cannnot have different Numbers for 1 item, if we have below,
(Item) GTS10000-(ECCN) 1A001
(Item) GTS10000-(ECCN) 2A001
(Item) GTS10000-(ECCN) 3A001
->2A001,3A001 changes 1A001.
If we have different ECCNs for 1 item, do we divide Numbering Scheme?
(Legal Regulation) JPACT1-(Numbering Scheme) JPECCN1
(Legal Regulation) JPACT2-(Numbering Scheme) JPECCN2
(Legal Regulation) JPACT3-(Numbering Scheme) JPECCN3
If you know another ideas, could you tell me the way.
Regards,
Naoya Kaneda.

Hi,
Iam little confused as to why you want to assign 2 or more ECCN's to one product.
Multiple products with identical features and attributes can be assigned to the same ECCN's but what is the use of doing vice versa.
I know of a concept called set numbers. Number sets enable you to group tariff numbers from several numbering schemes together. You can then assign a set to a product or multiple products to classify that product with multiple tariff numbers at the same time, to simplify the classification process.
This not only allows cross-country grouping of tariff numbers but also cross application grouping. If you use several areas of SAP Global Trade Services, such as SAP Compliance Management and SAP Customs Management and SAP Risk Management for your import and export processing, you can group the numbering schemes for the relevant number types together in a set.
Regards
Vivek

Why can't I drag things to the timeline?

I decided to upgrade to Adobe Premiere Pro CS3 last night after long debate and not wanting to spend the money. Everything is going pretty well now after transferring my project created using Adobe Premiere Elements 3.0 into the new program.
But now I just can't figure out why it won't let me drag media, video/audio transitions, or video/audio effects to the timeline or Effect Controls screen. I'm getting the little No Smoking/Ghostbusters symbol next to my cursor when I try to click and drag those items. Can anyone help? I've searched the help file in the program, the Adobe Premiere Pro CS3 Help.pdf file, did numerous Google searches, and searched this Forum.
Can anyone please tell me what I am doing wrong here? I was trying very hard to not waste anyone's time with a simple question if I could find the answer on my own, but I don't want to waste this entire weekend trying to figure out these problems if there's a simple resolution. :)
Thanks!
Matt

Hey! Hang on... I was wrong about the Gspot settings being exactly the same. My newly captured video in Adobe Premiere Pro CS3 (800MB file size) also says "File Length Correct". My video originally captured in Adobe Premiere Elements 3.0 (it says 500MB file size, but it's actually 8.9GB) says:
"Corrupt AVI Header:
This is an invalid AVI file due to corruption of the data in the header. This is a serious problem, and this file is not likely to playable (I'm not the one who typed this sentence all screwy and without end punctuation)
Details: While processing chunk /RIFF:AVI, found bad length value 1069461800 at file offset 0x0000fc94"
Just to check if the other camcorder tape that I transferred in had the same problem, I checked my other video file with a supposedly 1,820MB file size, though it's actually 10.2GB, and that file says "File Length Correct".
So it looks like this is not a file corruption issue with upgrading from Adobe Premiere Element 3.0 to Adobe Premiere Pro CS3, but possibly a corrupt file. However, it works fine now and I haven't come across any video problem yet.
This also doesn't explain the bass boost problem, but I am going to focus on that now.
Thanks everyone for your input, and thank you Steve about the Gspot tip!
- Matt

Why can´t I pass videos to the timeline?

I was working fine, and suddenly I couldn´t pass my videos to the timeline, when I try to do it there´s a hand and a circle like indicating it is blocked or something. Why is this? How can I put it off?

Hey! Hang on... I was wrong about the Gspot settings being exactly the same. My newly captured video in Adobe Premiere Pro CS3 (800MB file size) also says "File Length Correct". My video originally captured in Adobe Premiere Elements 3.0 (it says 500MB file size, but it's actually 8.9GB) says:
"Corrupt AVI Header:
This is an invalid AVI file due to corruption of the data in the header. This is a serious problem, and this file is not likely to playable (I'm not the one who typed this sentence all screwy and without end punctuation)
Details: While processing chunk /RIFF:AVI, found bad length value 1069461800 at file offset 0x0000fc94"
Just to check if the other camcorder tape that I transferred in had the same problem, I checked my other video file with a supposedly 1,820MB file size, though it's actually 10.2GB, and that file says "File Length Correct".
So it looks like this is not a file corruption issue with upgrading from Adobe Premiere Element 3.0 to Adobe Premiere Pro CS3, but possibly a corrupt file. However, it works fine now and I haven't come across any video problem yet.
This also doesn't explain the bass boost problem, but I am going to focus on that now.
Thanks everyone for your input, and thank you Steve about the Gspot tip!
- Matt

Why cant I see the video frames in the timeline view?

When creating a new video editing project, I cant see the movie frames in the timeline view. I'm not sure why, but I've been pulling my hair out trying to see what I looks like in the tutorial. Even if I have multiple scenes added, they don't appear in the timeline as video 1,2,3, etc(stacked vertically). I'm unable to utilize the editing functions of timeline without having the movies clips broken down into individual frames. Please help me understand what Im doing wrong!!

Thanks for the reply. The Toggle display does stretch out the clips but doesnt still won't show frames. This is all I can see in the timeline view.
I'm using quicktime movies. I notice on the help images the movie files are AVI. could that be the issue?

Why do I want bookmarks from other clips to remain in the timeline?

Hi,
I've been using iMovie for about a year now and am finally bothering to write in about this. Most of what I use iMove for are music video compilations so I have a bunch of clips that I work on. I trim them, combine them and then make a DVD (with iDVD). My question is, why does iMovie leave the bookmarks from the/all previous clip(s) in the timeline unless I delete them? Why would I (anyone?) want bookmarks from one clip to be there (in the timeline) when I am working on another clip? I take each clip out of the timeline and put it back in the clip window until I am ready to assemble them all, working on them one at a time. The bookmarks remain after I've worked on each on so have to I delete ALL each time. Why would I/anyone want them to stay? (Perhaps they appear in the correct place in the timeline if I keep adding clips but I think, and since I don't do this I may be wrong, that they don't. They certainly don't appear in the correct places when I put other clips in the time line. How could they when I haven't decided where I want the bookmarks to be in the new clips?)
Also, when I do an edit (crop), the bookmarks remain in their places (x frames in for example) even though I have shortened the movie. Shouldn't they adjust and in the case of cropping off some of the beignning, shouldn't they then be right at the beginning if that is where I had marked so I could crop it? I don't understand.
Thanks for any help. I'm using iMovie 5.0.2.
Cheers,
John L

My question is, why does iMovie leave the bookmarks from the/all previous
clip(s) in the timeline unless I delete them?
Bookmarks are an editing tool that we create as needed, keep in the Timeline for as long as useful, then discard, one at a time or all together. They are generally discarded when no longer needed.
(I feel Bookmarks are one of iMovie's most useful features, especially when iMovie preferences are set to Snap to items in the Timeline, and snap with audio. Bookmarks greatly simplify editing.)
Personally, I wouldn't want iMovie to decide for me when to discard my Bookmarks, any more than I want iMovie to discard clips or chapters. iMovie isn't very good at reading my mind, so I prefer to make those decisions.
When the current editing task is done, I tell iMovie to discard all the Bookmarks, usually just to clear the table.
The whole point of Bookmarks is to mark a point in the project, not mark a point in a clip. It's not meant to move as you move that clip or others.
You might create a Bookmark to use Direct Trimming to trim a clip to that point, for example, or place a new clip there, or insert a temporary "Black" clip as a placeholder.
You might create a Bookmark to mark the beat of the music in an audio track, for example, the spots you want to sync clips to. As in:
http://discussions.apple.com/message.jspa?messageID=607322&ft=y&#607322
Generally, you create a Bookmark to define a spot you'll use later. Whatever content you edit will move/adjust/fit to the Bookmark, not the other way around.
Does this make sense?
Karl

Why is the timeline numbering scheme wrong

Similar Messages

Maybe you are looking for