Why is the video audio white noise when I share my project since I updated to 10.0.9

On the movies I created before I updated to 10.0.9, the audio prortion of the video is now white noise. The audio is fine when played back in FCP, but when i share the project it is white noise. When I burn it to BluRay the audio is gone all together. Even when I make a master file to my desktop, it still happens. The music I added to my project is fine. It just the audio that is part of the video clips that is affected. I've turned off the EQ's and Compressors I was using and I even tried moving the audio to the center channel instead of mono. No luck. Need some help. I can't figure this out.

I'm encountering the same problem as the original poster.  In my case, I'm using FCP 10.1 (running on OS 10.9.1).  My source file is DV video imported via FireWire from a DV camcorder.  The clip's audio is fine when playing inside of Final Cut Pro 10.1, but when I share the project the audio track is just white noise.  My share settings are to Apple 720p devices (the subseqent dialog boxes indicate the software has figured out it's really 640x480 video).
Here's what the QuickTime Inspector says about the source file:
Format:
DV/DVCPRO - NTSC, 720 x 480 (640 x 480)
Linear PCM, 16-bit little-endian signed integer, 48004.6 Hz, Mono
Linear PCM, 16-bit little-endian signed integer, 48004.6 Hz, Mono
FPS:  29.97
Data Size:  5.87 GB
Data Rate:  30.30 Mbit/s
Current Size:  640-480 (actual)
I tried changing from "faster encode" to "better quality", but it made no difference.
The rather dated version of Compressor I have (v3.5.3) was able to encode the clip to H.264 640x480 and the results are fine.  However, it took way longer than FCP 10.1 (I think it's too old to be taking advantage of the GPU).

Similar Messages

  • 890GXM-G65 on-board Audio white noise when shutting down ... Please Help

    Just got this board on ebay. Runs great but when rebooting the following happens:
    MSI 890GXM-G65 on-board Audio produces a second's worth of white noise (radio no-station-tuned static sound) when shutting down - about a second before the screen goes bank and the PC restarts
    I don't mind the noise but is this normal or should I send the board back ?

    I'm using the following hardware :
    Athlon II x 3 440 AM3 (unlocked 4 cores @ 3.6GHz)
    Thermaltake MaxOrb
    MSI 890GXM-G65
    2 x 2GB Kingston 1066 CAS 7 DDR3 KVR1066D3N7K2/4G
    MSI N460GTX Cyclone 1GD5/OC
    OCZ Fatal1ty 550W Modular (Dual Rails +12V@25A per rail)
    WD 250GB 7200rpm SATA II
    Thermaltake Gaming Cube VF6000BNS
    Windows 7 x64 Home Premium
    19" Sony Triniton CRT Monitor
    All Windows Sounds are turned off except for Device Connect / Disconnect / Connect Failure. I have an Audigy 2 PCI card but I haven't tried it because the drivers always lock up the PC when I run MSI Afterbutner, eVGA Precision or almost any other hardware monitoring utility.
    Since I flashed the BIOS to v1.B I feel I can't return it to the seller but I really like the board and it works well, except for this integrated audio issue. I won't return this board - it's a keeper.
    Still, I'm hoping for a fix if possible.

  • Why is the video quality for AVCHD when uploaded to youtube higher...

    when submitted from a mac?
    #1
    http://www.youtube.com/watch?v=f8d-fQxdBmQ
    I sent this video directly from my Macbook using iMovie 8.0 and that's the video quality results
    #2
    http://www.youtube.com/watch?v=5U3dDmAX7C0
    I uploaded this using Adobe Premirere Pro CS 4 H.264 - youtube HD widescreen preset and those were the results...?
    Why?

    "I suspect you simply didnt wait long enough for youtube to fully process  the video before you watched it."
    Incorrect. After I uploaded the second video, I went to sleep, without watching it once.
    So if I set the 2nd video to low resolution, would it end up looking like the first video? Because I still think the first video has better quality.

  • Why are the video player change size when resizing the window a little?

    When I use the video player to show mp4 files, the "player window" changes size if I change the firefox window. Why and how do I do to get the correct size direct (640x480)

    Hi john3,
    This can be the resolution of the screen or the site detecting screensize, do you have a url we can take a look at to determine what's going on?
    Thank you!

  • I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

    I inserted a HTML5 video in page, when I test it in a Browser, I see the poster image and controls, But when I click play button the video goes white, slider moves like its playing, but just white picture. There was no audio included in video. Please help

    Without a link, it's anybody's guess.
    It could be a problem the video rendering itself.  Which software did you use?
    Did you export to the 3 file types -- MP4, OGG and WEBM to support all browsers?
    Does your web server support those 3 MIME file types?
    Nancy O.

  • Why is the video I took with my iphone5c clear but when I email it it is blurry

    Why is the video I take on my IPhone5c clear but when I email or post to Youtube it is blurry?

    DId the Sprint people possibly set this code?

  • I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    I took some videos using my iPhone 5c and uploaded them to my computer.  I can play the videos in iPhoto, but when I open them in QuickTime, they are dark and silent.  Why can't I see them in QuickTime?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • When I'm using facebook on Safari,why is the video icon on chatbox is missing?

    when I'm using facebook on Safari,why is the video icon on chatbox is missing?

    Because video chat is not available.

  • Why is the video buffering when downloading

    why is the video that I am downloading buffering on my imac.

    Probably because your Internet connection is too slow. What speed is your connection? Your computer is running much faster than your connection can provide the movie data.

  • How do I edit the video audio in Adobe Premiere Elements 10

    I want to edit the video audio, so that I can get rid of some of the sounds and background noises.  Also, how do you import Plug-ins into Adobe Premiere Elements 10?  I have trial versions of Adobe Audition CC and SmartSound.  Thanks in advance for your help!

    woody122
    What computer operating system is your Premiere Elements 10 running on? And, very important, what video card/graphics card  does your computer use.
    If a NVIDIA GeForce card, then that needs to be looked at first because of the serious and known Premiere Elements 10/NVIDIA GeForce issue which is described in one of the announcements at the top of this forum.
    SmartSound is an feature included with Premiere Elements 10. Why are you looking at any trial version of SmartSound?
    As for Adobe Audition CC, I was not aware that this is a plug-in. As far as I know, Adobe Audition CC is an application that Premiere CC can integrate with as a CC application which Premiere Elements is not.
    See the following video tutorial
    Clean up Premiere Pro audio clips with Audition | Adobe Creative Cloud tutorials
    Look at the price tag afterward, probably on subscription rates?
    Please check out the Premiere Elements 10 audio effects, especially those related to noise reduction.
    Have you looked at the free audio editor named Audacity and its noise reduction opportunities?
    Please give more details in support of your Adobe Audition CC being a plug-in if you are confident that it is.
    Thanks.
    ATR

  • When I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

    when I Share my project using QuickTime the top of my video is chopped off, how do i fix this?

    What version of Premiere Elements and on what computer operating system is it running?
    - Mac OSX; Premier Elements 11 v11
    Where is the audio in the project - numbered audio tracks, Narration Track, and/or Soundtrack? Any chance that you are using a XviD.avi file?
    - audio is either in the soundtrack , or in audio 2 when part of a video
    Besides the full properties of your source file including file extension, what are the full export settings that you are using presumably for Publish+Share/Computer/MPEG?
    - i was just using the default for MPEG, which is the NTSC DVD standard, file type MPEG2-DVD
    What player are you using? Does the file playback video and audio using the VLC player? Does the problem exist in a new project?
    - i have tried in quicktime and VLC, both have the same effect (picture works, staccato background noise).  I have not tried in another file, but will do so now.

  • Why does the Video looks Pixelated after Burning DVD

    In IDVD when I preview the video it looks great, when I burn the DVD it comes out very very pixelated. I've changed the preferences from Best Performance to Best Quality, and the project properties as well I've done the same. Does anyone know why this is happening?
    I'm using 16:4 aspect ratio Video Size is 1280x720
    Help

    How are you viewing the DVD you created - on a computer or on a TV?
    In IDVD when I preview the video it looks great
    The preview uses your original content on your hard drive and is simply designed to allow you to see if the 'flow' (sequences, menus, etc) are what you wanted.
    In addition, although iDVD 'supports' HD, it only supports it in the context of current specifications - not the new HD DV world that has two competing HD DVD formats.
    This means your 1280x720 content gets downsized and compressed to fit on a 720x480 DVD. The video must be 'expanded' to play on a HD set.
    BTW, your aspect ratio is 16:9 and NOT 16:4. 16:4 would REALLY be widescreen! I haven't seen THAT spec yet.

  • Why is the Video clip jumpy?

    Why is the Video clip jumpy? I have just installed Premiere Elements 12 in a brand new computer:
    Acer Aspire V5
    CPU AMD Dual Core Processor a-4 APU with Radeon (TM HD Graphics 1.0 GHz)
    4GB DDR3 memory
    500 GB HDD
    Windows 8.1
    The file types are AVI, AVCHD, and MOV files

    northgal
    Lots of ways to go on this. But, I think starting with a definition of the source media and how you are setting up the project is going to be the path to success. So, we need to zero in on questions/answers related to what I wrote earlier
    The properties of the source media need expanding up beyond "file types are AVI, AVCHD, and MOV.
    a. What are the video and audio compression of the files with the .avi file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    b. What is the file extension for the file with the AVCHD video compression. Again, what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    c. What are the video and audio compression of the files with the .mov file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    You asked how to go about that. The best way is to run each of the file types through a video properties read out program such as MediaInfo
    http://mediaarea.net/en/MediaInfo
    Latest versions of that MediaInfo have been problematic in that you need to be on guard for any unwanted toolbars and installed "extra" programs (bloatware).
    OR
    We would not necessarily get more information, but we would get enough to put us in a good position, if we run the types through gspot utility (good for codec and basic information)...less bloatware concerns
    http://www.headbands.com/gspot/
    The dialog that you would get from gspot would look like
    Once we know the video and audio codecs, frame size, frames rates, interlaced or progressive frame rates, etc. that we are dealing with, we on a good course to set up the project settings to match those properties, independant of whatever export choices we have in mind. That we will address later after a successful import and edit.
    OR
    A third choice for getting at this information is less productive but can be a good last resort...knowing the brand/model/recording settings of the camera from which these files came.
    Please review and then let us know if you can gather the file properties information details requested.
    We will be watching for your results.
    Thank you.
    ATR

  • Why is the video inside FCP 6 slightly darker than the OS

    Why is the video playback inside FCP 6.0.5 slightly darker than wehn I play the same Quick Time file just inside the normal OSX10.5?
    I'm using a Cinema HD 23" monitor running at 1920x1200 and display profile is Cinema HD Calibrated
    Thx
    Kevin

    It is darker because that is a more closely representational GAMMA as to what you will see on your external broadcast monitor. QT lightens the gamma to ensure that most computer monitors can see the footage. As stated, if you want the gamma to appear darker, enable FCP COLOR COMPATIBILITY in the QT preferences.
    WHY does it look more like what you see in FCP when you view this on a PC? Well, that is the monitor that PC is using. Take this file, put it on 10 PC all with different monitors and you will see 10 different gammas. The monitors themselves can be set to certain DISPLAY PROFILES (look in your DISPLAYS section under COLOR)...so you can have a HUGE variety of looks.
    The reason is because of the monitors and the computers driving them.
    Shane

  • The ringer only makes noise when the earpiece is in.  The settings are showing as correct

    The ringer only makes noise when the earpiece is in.  The settings are showing as on for both ringer and messages.

    The internal switch in the audio output port is stuck.  Try inserting the earphone plug a few times.  If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
    Ciao.

Maybe you are looking for