Why is the video dropping frames after export?

http://vimeo.com/65108558
The video in question is in the above link. I am using PP CS5 with a new iMac i7 32gb cuda enabled. When watching the clips in the timeline everything looks normal. This video was encoded to h.264 max render quality with the vbr at 50.
There has to be an issue with the export settings, as to why my exports looks like this. Any one who can help out would be greatly appreciated.

May 2, 2013 2:02 PM 1st message 32 minutes later 2nd message May 2, 2013 2:34 PM
This is a user to user forum, so it may very well take more than 32 minutes for some other user to try and help
I am on Windows, so can't really help... you may need to wait for a Mac person

Similar Messages

  • Why does the Video looks Pixelated after Burning DVD

    In IDVD when I preview the video it looks great, when I burn the DVD it comes out very very pixelated. I've changed the preferences from Best Performance to Best Quality, and the project properties as well I've done the same. Does anyone know why this is happening?
    I'm using 16:4 aspect ratio Video Size is 1280x720
    Help

    How are you viewing the DVD you created - on a computer or on a TV?
    In IDVD when I preview the video it looks great
    The preview uses your original content on your hard drive and is simply designed to allow you to see if the 'flow' (sequences, menus, etc) are what you wanted.
    In addition, although iDVD 'supports' HD, it only supports it in the context of current specifications - not the new HD DV world that has two competing HD DVD formats.
    This means your 1280x720 content gets downsized and compressed to fit on a 720x480 DVD. The video must be 'expanded' to play on a HD set.
    BTW, your aspect ratio is 16:9 and NOT 16:4. 16:4 would REALLY be widescreen! I haven't seen THAT spec yet.

  • Why does my video become longer after exporting from Flash?

    I am a relative novice in Flash and working in CS5. When I test my file, it plays perfectly with the audio I embedded in my timeline. I tried a couple different compressions when exporting into a Quicktime file, but my video which is only 32 seconds long at 30 fps becomes 52 seconds long! The animation slows considerably, and yet the audio I embeded plays perfectly. Any advice as to how I can get it to match the "test movie" option so I can get this bad boy on YouTube?
    PLEASE and THANK YOU!

    Without knowing the overall innards of the timeline it's hard to suggest a strategy other than those already mentioned. A clean test worked fine so the audio doesn't seem to be the issue.
    Can you explain what is "buggy" about the output from the converters? Again, those should only be used if there's code involved to facilitate the animation. They essentially run the SWF and attempt to capture each frame as an image while stitching them together into a video. It's a fairly simple thing to do so it's hard to go wrong unless the hardware on the computer isn't keeping up with the SWF frame rate.
    Flash CS6 is not compaible (to my knowledge) with 10.8 so that works to your advantage. Perhaps you can try downloading a trial of Flash CS6 and see if your export issue goes away. It won't solve why CS5 is giving you issues but it does put the power in your hands to export it for now. If it still fails to export that's a pretty convincing argument that a gremlin on the timeline is monkeying around.

  • When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

    When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
    Its the same on most of the preset amps.
    Please help, the apogee cost me £80!

    Is it stopping recording after 8 seconds? Are you using Garage Band?
    If both of these are correct:
    This is actually a feature (i'm not sure why it defaults to this).  Instructions for the iPhone version are below:
    With the amp section open, touch the sproket on the upper right.
    You should be in a "settings" type area with three tabs.  Touch "Sections"
    Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

  • Why is the Video clip jumpy?

    Why is the Video clip jumpy? I have just installed Premiere Elements 12 in a brand new computer:
    Acer Aspire V5
    CPU AMD Dual Core Processor a-4 APU with Radeon (TM HD Graphics 1.0 GHz)
    4GB DDR3 memory
    500 GB HDD
    Windows 8.1
    The file types are AVI, AVCHD, and MOV files

    northgal
    Lots of ways to go on this. But, I think starting with a definition of the source media and how you are setting up the project is going to be the path to success. So, we need to zero in on questions/answers related to what I wrote earlier
    The properties of the source media need expanding up beyond "file types are AVI, AVCHD, and MOV.
    a. What are the video and audio compression of the files with the .avi file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    b. What is the file extension for the file with the AVCHD video compression. Again, what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    c. What are the video and audio compression of the files with the .mov file extension and what is the frame size, frame rate, interlaced or progressive, pixel aspect ratio?
    You asked how to go about that. The best way is to run each of the file types through a video properties read out program such as MediaInfo
    http://mediaarea.net/en/MediaInfo
    Latest versions of that MediaInfo have been problematic in that you need to be on guard for any unwanted toolbars and installed "extra" programs (bloatware).
    OR
    We would not necessarily get more information, but we would get enough to put us in a good position, if we run the types through gspot utility (good for codec and basic information)...less bloatware concerns
    http://www.headbands.com/gspot/
    The dialog that you would get from gspot would look like
    Once we know the video and audio codecs, frame size, frames rates, interlaced or progressive frame rates, etc. that we are dealing with, we on a good course to set up the project settings to match those properties, independant of whatever export choices we have in mind. That we will address later after a successful import and edit.
    OR
    A third choice for getting at this information is less productive but can be a good last resort...knowing the brand/model/recording settings of the camera from which these files came.
    Please review and then let us know if you can gather the file properties information details requested.
    We will be watching for your results.
    Thank you.
    ATR

  • Why do my FCP drop frames on playback working on HD movies?

    Working on HD movies may machine drop  frames after I cut the secuense. Why?
    Model Name:          Mac Pro       OS X    V. 10.6.8
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          12 MB
      Memory:          14 GB
    ATI Radeon HD 5770:
      Chipset Model:          ATI Radeon HD 5770
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          1024 MB

    lots of numbers.
    what's missing:
    How's your Events drive connected, internal or external? if ext, usb2/3/fw/tb?
    Are you using Optimized media? Proxies? if not, what codec?
    Finally: complexity of Project - multicam, color correction, multiple tracks?

  • Final cut pro dropped frames after transition

    Hi, I'm kind of new with FCP 7 and have an issue getting dropped frames after applying a transition effect into my video. Everything else is working right but just after I apply any dissolve or transitions the video hiccups.Even rendering it still jumps.
    I'm using a canon rebel t2i which gives me a h.264 codec (I've read that is a hard format for editing) but it is the only one I got, is there a way to solve this issue ? Thanks!!

    Solve it by transcoding the h.264 file to pro res using MPEGStreamclip.

  • Video is jittery after export.

    The videos I have been exporting are jittery in fast motion scenes.
    My Sequence settings are-
    DV - NTSC: Widescreen 48kHz
    Editing mode: DV NTSC
    Timebase: 29.97 fps
    Pixel aspect ratio: D1 Widescreen 1.2121
    Fields: Lower field first
    Display format: 30fps drop-frame timecode
    Preview file format: NTSC DV
    Codec: DV NTSC
    Under playback settings-
    External device: none
    Aspect ratio conversion: hardware
    Export: None
    Disable video output when in the background is checked.
    24p conversion method: interlaced frame (2:3:3:2)

    I burned the video to a DVD. It's also jittery using other software. Settings below.
    Format: MPEG2-DVD
    Under Video -
    Quality: 5
    fps: 29.97 drop frame
    Field Order: Lower
    PAR: Widescreen
    Bitrate Encoding: VBR, 2 Pass
    Minimum: 2
    Target: 5
    Maximum: 9
    M Frames: 3
    N Frames: 15
    Under Interpret Footage -
    Use Frame Rate from File: 29.9700
    PAR - Conform to: D1/DV NTSC Widescreen (1.2121)
    Field Order - Conform to: Lower Field First

  • Not rendering - Getting dropped frames when exporting to tape

    I am trying to export my project to Mini DV tape. I have been successful before, but am continually getting dropped frames. I noticed that the sections that are getting dropped frames are showing that it is not rendered (red bar). I have tried rendering them several times, but still show the red bar. I am using a PowerMac G5, Dual 2 GHZ processor with 3GB RAM. The footage is on a Lacie Firewire 800 external hardrive and there is almost 200 GB of free space. I do get occasional dropped frames, but not as often as I am now.

    Is there anything else I can do? When I get the Warning - Dropped frames, it suggests turning off "Unlimited RT", which I have and set to "Safe" because I was getting dropped frames. Will this affect the quality when exporting? I have set the Video Quality to "Dynamic" and Frame Rate "Full" and Record "Full Quality". Do any of these settings need to be changed? Lowering your compression data rate (I'm not sure what that is), Closing open sequences (which I've done), Lowering the preference for real-time audio tracks (how do I do that and again will it affect the quality?), Increasing the speed of your system and/or disk drives and/or network connection (Is there a way for me to do that?)

  • Why does Premiere CS6 drop frames in capture?

    Why does premiere CS6 drop frames when I capture from my Canon Visia HV40 via Firewire 400
    Bob Lamb     [email protected]

    1st, more computer information might help... such as the Information FAQ http://forums.adobe.com/message/4200840 questions
    2nd, some other software to try... to see if the problem is with your computer, or CS6
    I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html -and http://forums.adobe.com/message/4708997
    I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

  • My SD video keeps jumping between the upper and lower frames. So the video starts frame blending and blurring in and out.

    My SD video keeps jumping between the upper and lower frames.  So the video starts frame blending and blurring in and out.  The sequence settings are set to
    Editing Mode: DV NTSC 29.97 frames/second. 
    Pixel Aspect Ration: D1/DV NTSC (0.9091)
    Fileds: Lower Field First
    Display Format: 30fps Non-Drop-Frame Timecode
    720 x480

    What is the source of your video, and exactly what is inside your video?
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

    Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
    I Turn it off/on  and nothing changes.

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • HT1338 why is the video not working with skype on this os

    why is the video not working with skype on this os

    Try this:
    Quit Skype.
    Click on the desktop so Finder is active. Hold the option key down and click on Go in the menu bar.
    In the drop down, select Library.
    Open the Library folder and scroll down to Preferences.
    In that folder, there is a file called com.skype.skype.plist. Trash that file.
    Now try Skype.

  • Why does the screenline shut down after about 2 clips?  the tutorial worked fine.

    Why does the screenline shut down after about 2 clips?  the tutorial worked fine.

    I don't know about MOD files, since I don't use them
    >As a beginner
    LOTS of learning information in these links
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/

  • Jerky playback with dropping frames after iPod/iPhone Conversion

    Hi!
    I have a problem converting quicktime hd material to iPod/iPhone H.264. I know that there are iPhone Trailers available on the Apple Movie Trailer Page, but lets take a trailer as an example video source, because they are free to use and are leading to the "dropping frames" problem.
    Source video data:
    H.264/MPEG-4 AVC
    23.976 fps
    5755 Kbps (VBR)
    1280x720 (16:9) / Progressive
    Converted video data:
    H.264/MPEG-4 AVC
    23.976 fps
    1472 Kbps (VBR)
    640x360 (16:9) / Progressive
    While the source video playback is smooth in quicktime, the converted video drops frames and the playback is very jerky.
    The problem occurs with every single trailer i tried (e.g. The Curious Case Of Benjamin Button).
    I also tried to convert the material with visualhub (ffmpeg/vlc) - same result.
    Has anyone ideas how to solve this problem? Thanks in advance!
    Message was edited by: florian.kloppe

    The issue could very easily be insufficient hard drives.  You really should have a minimum of three internal drives for editing.  A single 5400 RPM drive is bound to cause lags.

Maybe you are looking for