Why is the volume of my song not as loud on iTunes?

When I adjusted the volume on garage band to where it's perfect. When I shared it to iTunes, it wasn't as loud. Why is that?

ekoko wrote:
When I shared it to iTunes, it wasn't as loud. Why is that?
http://www.bulletsandbones.com/GB/GBFAQ.html#exporttooquiet
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • Why is the names of my songs not what they actually are, i even deleted them and put them back on but their still mixed up ?

     

    There not new ones i had them on my phone but then when i did the new update and playd a song it wasnt the song that i wanted to play at all it was just another one that was in my library ?

  • Why is the volume of my phone so low in calls ?

    Why is the volume of my phone so low in calls ?

    Hey there Claudia,
    It sounds like the audio from the receiver is low when you are talking on the phone. I found this article for you to help troubleshoot this issue named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Receiver
    Follow these steps to resolve the issue:
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Why is the sound on my Envy not working?

    Why is the sound on my Envy not working?  Checked all volume levels, mute, settings etc.

    Hello NellyMac,
    You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
    Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Why is the week number in iCal not ISO8601?

    why is the week number in iCal not ISO8601?

    Error "The serial number is not valid for this product" | Creative Suite

  • After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

    After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it. See below for how to clone a drive.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

  • The volume for "Downloads" can not be found

    i keep getting this message when i click downloads in the finder sidebar menu. if i want to see something i downloaded i have to actually find the folder and that takes too long. Is there anyway i can stop this message from coming up (The volume for "Downloads" can not be found) when i click on it from the sidebar?

    That's a very good question. I have a hunch that it might be the plist file com.apple.sidebarlists.plist which you will find in <home>/Library/Preferences.
    The only thing is that I do not know if you can simply move that file to the desktop, close the current Finder window, then open a new Finder window and add the items you need back into the sidebar. Because Finder is running all the time, I would be very wary of doing that just in case it causes drama . Perhaps one of the other Guru users might have a comment on that.
    Alternatively search the discussions for possible clues along those lines.
    Chris

  • THE VOLUME FOR "MOVIES" CAN NOT BE FOUND

    Not sure if I posted this in the right place. I would appreciate anyone that can help.
    I installed iLife 08 yesterday and everything seemed to go fine.
    When I go to open my MOVIES folder I keep getting a : "THE VOLUME FOR "MOVIES" CAN NOT BE FOUND" message?
    What happened??
    More importantly....
    On the left hand of my Finder window where it lists DEVICES, PLACES, and SEARCH FOR.... if I click on SEARCH FOR and go to ALL MOVIES....
    I was relieved to find all of my movie files still in there.
    BUT HERE'S THE PROBLEM:
    I was watching some of the movies... and I noticed as soon as I clicked off and started viewing a new movie... the previous movie would disappear from the ALL MOVIES FOLDER... and the number tally would decrease.
    I finally realized after 10 movies that files were disappearing... or perhaps being deleted.
    I used FIND to try to locate the lost files but no such luck. I can't find them anywhere.
    It also appears to be only my WINDOWS MEDIA PLAYER FILES that are disappearing.
    What happened to my MOVIES folder? and where are these lost files going? Are they being deleted? UGH UGH UGH!
    If anyone can help I'd greatly appreciate. I'm very frazzled.

    Welcome to Discussions - This is the G5 forum, you seems to have a G4. I suggest you post in the [iMovie|http://discussions.apple.com/category.jspa?categoryID=141] forum, where you will get better informed help.

  • Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • Why is the volume so low on my iMac when I'm using Safari?

    Why is the volume so low on my iMac when I'm using Safari?
    On both my 2008 MBP and my new 2014 iMac 27" when I listen to the audio portion of a streaming video or news story using Safari, I can hardly hear anything. I have to crank the volume all the way up just to barely hear what is being said. Any ideas on how to fix this?

    please help!! I have the new 2014 iMac 27" as well, same thing happen to me. Dont know what to do!

  • Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

    Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

    Songs you rip from CD can have their bitrate increased to a maximum of 320Kbps from the iTunes preferences; alternatively, the default encoder can be changed to a lossless one. Songs from other sources have a fixed maximum bitrate.
    (67928)

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • HT203167 Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

    Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

    I recently had to reinstall my software for a
    dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
    The 2131 usually indicates firmware needs to be updated on a drive.
    Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

  • Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

    Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
    Why are the planned orders not displayed anymore. They are still in the system - in  MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared  from transaction MCP9!!!!.Now we are using Version 4.7
    There must be a reason 
    Perhaps searching in  SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
    Or we need to apply an OSS note from SAP to repair the problem...
    Or the info system update must be modified because of rel change... I don't know.
    Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

    Dear Guruji Mr.Rajesha vittal,
    Sir ,iam stuck with this problem,not able to proceed.
    Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
    Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
    I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
    Thanks & Awaiting your reply
    P.S.KIRAN
    [email protected]
    [email protected]

  • Why does the password of Apple Id not paste from the clipboard at the Ipad?

    Why does the password of apple id not paste from the clipboad at The ipad 2 ?

    In most apps, you can't paste into the password field. It's a security risk.

Maybe you are looking for

  • Handbrake Screen Size

    I made an interesting discovery on handbrake by accident last night. I put in Indiana Jones and the Temple of Doom before I went to bed, adjusted all the settings but forgot to adjust the screen size. I've done this before and I usually would have ju

  • Calling batch file using dbms_scheduler

    Hello, i have created a schedule, program and a Job to using the DBMS_SCHEDULER. creates all those fine but when i try to run i get errors. here is the code: begin dbms_scheduler.create_schedule( schedule_name => 'dailyjob', repeat_interval => 'FREQ=

  • How do I transfer an album from photoshop elements 12 to my ipad?

    How do I transfer an album from photoshop elements 12 to my ipad?

  • Cannot change Firefox start page on XP, always Dell Start page.

    I cannot change the start page on Firefox on my Dell XP. I can change it on I.E., Seamonkey, and Netscape. Firefox always becomes the Dell/Google start page. I don't have the GoogleAFE nor the Browser Address Redirect programs. I don't have the My Wa

  • Database Issue Or Jdeveloper Issue???

    hi all, i have some problem and i need help now i have table that its data in Arabic language i made form in jdeveloper that updates the data using execute operation but after pressing on execute button the data converted to strange characters what i