Why is the White MacBook out of the store?

Hallo Apple lovers,
I have a quastion for you: Why is the White MacBook out of the apple store?
Greetz,
Ruben.

The MacBook was sort of the "odd man out" in the whole MacBook lineup. With the update of the Air and the availability of the 13" MacBook Pro, there really isn't a place for the MacBook. Although, I don't believe Apple has made any announcement about discontinuing it.

Similar Messages

Why do I get sometimes my macbook to do white noise out of the blue

Why do I get sometimes my macbook to do white noise out of the blue? It's a new mac so is it faulty?

Never heard of that problem - seems as if something may be affecting your speakers, somehow.
If you're still under warranty, you should take your machine to your local Apple Store or an AASP and have them check it out. Even if you're not still under warranty, the diagnosis and estimate for repair will be free.
Good luck,
Clinton

Why does my brand new MacBook pro have 13 cycles on the battery right out of the box?

Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.

horn0371 wrote:
Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.
Yes it should have 0. I would return it, that means that the battery has already went through 13 full cycles. Perhaps they accidentally resold a returned one as new.

How many revisions have the white macbook had?

Just wanted to know, I have had 2 white macbooks in 4 years.
Seems all of them have faulty cases, go to an applestore and look at all the white macbook's and you will notice all of them have faulty top-cases.
Just bought my second and after 2 returns, I still cant get a 100% clean macbook, how is that or why is that?lol
1st. Bad top case separation and faulty isight camera.
2nd. Couldn't burn a DL DVD and had slight top case issues and crashed all the time, genius said needs a DVD drive and new ram too.
3rd. Seems to be ok, but it's still under a day old, so who know for sure yet.
Should I feel like an *** for taking back computer that are not even 85% working out of the box?
Thanks for your time!!

There are 7 revisions of the white MacBook. It does seem like most of them have the issue with the topcase, and many people believe the way Apple dealt with this problem is by introducing first the unibody MacBook and now the smaller MacBook Pro.
I think you've had some bad luck with the machines you've received. My MacBook is about 15 months old and I had the topcase replaced after I had the computer for 11 months. Haven't had any issues for 4 months now!
~Lyssa

When is there going to be an update for the white macbook?

when is there going to be an update for the white macbook?

bambateehee wrote:
how do you know that they are not coming out with another one, though? lol
I don't, I am just answering the question asked without speculating on days to come.

IMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?

Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now?

I have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS?

i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.

First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd

Does the K8N Neo-FSR support the mobile chip out of the box

just like the titles says
does the K8N Neo-FSR support the mobile clawhammer out of the box.?
if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

Jim,
From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice. It's also reported to have some performance improvement over Winchester and Newcastle. It will use a default 1.4v VCore. Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
If Monarch is shipping the combo with available Bios, you can bet they work. I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues. They shipped mine with B3, and I think there may be a reason. The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay. That's why you see those memory settings working on mine.
On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice. Use the Venus 7+ in my specs. It's low profile, all copper, and one of the highest rated. Monarch has it in their configurator. It's as quiet as AMD's. Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
Danno

My computer froze so i manually restarted it. Since then, I haven't been able to proceed past the white loading screen with the grey apple on it. What should I do?

My computer froze so i manually restarted it. Since then, I haven't been able to proceed past the white loading screen with the grey apple on it. What should I do?

Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The RepairDisk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!

About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help!
I've had my new one for less than 3 weeks. What gives? I'm loosing faith in apple

no body?

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Th

Hi, I'd like to put a black and white effect on my colour footage which will look really sharp but which also looks bright so the whites look bright and the blacks look very dark . Any tips of which best effects to use to achieve this look in Prem Pro. Thanks

Under the Effects-Lumetri Looks-Desaturation choose a B and W effect. Then add the luma corrector from the Video effects-colour correction section. Adjust the brightness and contrast to get the effect you want.

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

If the OS X 10.2 on the hard drive is/was bootable, try this -
Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

The cursor "jumps out" of the find box before search line is completed?

I frequently use "find" command..... what happens VERY frequently is that the cursor "Jumps out" of the find command box prior to my finishing the search letters......... Firefox wants to locate ANY item with only a few matching intro letters........... This is VERY annoying.... I do believe that Firefox should be changed so the find search will be executed when "enter" is keyed.........

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Why is the White MacBook out of the store?

Similar Messages

Maybe you are looking for