Why is the youtube is not working if i am connected with other wifi... But its working if im home... Help me guys

Hi... Please help meguys

What is 'other wifi'? If it works at home, but not away from home then the host of that wifi service may be blocking or slowing down their service. Does it work at all, start and stop, or is there nothing at all? Many public wifi or hotel set ups are crowded, with many folks sharing a single connection. You tube needs a good fast connection to work well.

Similar Messages

Why doesnt the youtube and imessege work on my ipad

why doesnt the youtube and imessege work on my ipad

For iMessages there is some troubleshooting on this page : http://support.apple.com/kb/TS2755
Has the YouTube app previously worked on the iPad, and have you ever synced the iPad with your computer ? This page for YourTube (which refers to a "Cannot connect to YouTube" error message) says :
To use certain services, iTunes must download and install an authentication token on the device. Because iPad and iPod touch do not require an active Internet connection to activate, these tokens may not be downloaded and installed during initial setup.
You can resolve this issue by verifying that iTunes has an active Internet connection. Use the following steps:
Open iTunes on your Mac or PC.
Verify that your Mac or PC has an active Internet connection by accessing the iTunes Store in iTunes.
Connect your iPad or iPod touch to your Mac or PC.
After the sync completes, verify you can access YouTube.

Why does the sync button not work in itunes when my ipod touch is connected

why does the sync button not work in itunes when my ipod touch is connected?

It's working for me in Acrobat XI:
I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
workspaces.acrobat.com

Why is the "plug in" not working every time i try to stream?

Why is the "plug in" not working every time i try to stream?

If you own "Sausage Fattner" you'll find a update in your email that solves this problem.

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

Why do the youtube clips not expand properly when I double click on the page

why do the youtube clips not expand properly when I double click on the page

The exclamation mark is telling you that iPhoto has broken the file path/link to the original file. Assuming you're using iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks

I already update my os to ios7 but the panorama wallpaper is not working, i try to use before the ios7 beta, the panorama is working. Why in this ios7 is not working. Could anyone help me????? Thanks

That's odd.
Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.

My ipod connects with other computers but not mine.

my ipod connects with other computers but not mine.

Start here:
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Why does the remote app not work with Apple TV 1st gen anymore.

This is a review I just left on the app store, I am posting it word for word, and i hope that dowsnt complicate anything. My hope is that this finds the right party to address the situation, and if any user has a fix, I would love to hear it.
I have an Mac mini running iTunes as a server, I have 2 airport expresses to allowing airplay to them for different rooms, and I also have 2 Apple TV first gens... I can play one stream of music from the server, and have the option of playing 2 other streams of music from the apple tv's as they have a built in hard drive to sync music to. I can send any of the feeds to any o the devices in any room and i love it. This whole system used to work flawlessly... It doesn't anymore. The latest update of remote broke what was working so well. I can pull it up and see all 3 music sources, log into each and play music, no problem there. The problem is that when I want to log back into that device, it won't show what music is playing. It loads up to a trackpad... Why do I need a trackpad? the point of a wifi remote is that it interfaces directly with the library, not needing to see the display... Annoying enough in itself as none of my devices are actually hooked up to a screen, but whatever, annoying point aside, I back out of the trackpad and refresh the device playing music... The music is playing, but won't show on my remote, I can't pause, press next song or anything. I have to start over and pick a song and override the currently playing song. Even the volume control is broken. I used to control each volume of each of the multiple devices individually, they each had a slider in the multiple speaker view, now there is only one master volume slider... One speaker is in my baby's room... If she is sleeping I don't want to have to go into the room to physically adjust that speaker, I want an individual slider like there was before.
I used to be very happy with this app. I'm not anymore. I used to praise apple and promote the functionality of it to all of my friends. Now I'm just embarrassed when I can't control it when they are over. Embarrassed....
As another fail.... I want to describe another point. As I have the iTunes server, it should be able to handle multiple things at once. It can to an extent... For example, I can play music from the server to an airplay device, and I can go onto my iMac, load up iTunes, click on shared libraries ad load my entire library from my server. I ca also at the same time take my iPhone, click on music, and again pull up my entire shared library of music from the wifi server... It handles this very well. I recently purchased an Apple TV 3. As it does not have a built in hard drive, it relies on content from a locally attached network or stuff from your iTunes account. So while I can use my iPhone to pull up the entire shared library while its also playing elsewhere, why can Apple TV 3 not?... It's using iOS just like my iPhone. All it was good for was airplay as an extra speaker. It wouldn't work as an extra rendered source of media using the shared library. Needless to say, that Apple TV went back to the store. Fail Apple, Fail.... That was the only reason I bought one. Maybe Apple TV 4 will actually be functional without a hard drive.

Working fine on my system
If on wifi, try ethernet
Make sure router is up to date
Reboot all components

Why does the App Store not work in Genius with VoiceOver switched on

After I downloaded IOS 6 to my iPhone 4 there were a lot of things not working properly, the main things that were a problem was the App Store, to move anything with VoiceOver switched on it was touch-and then tap twice also to move the thing on the page you use three fingers swipe up or down left or right to move it. We now find that to move something in Charts you only need one finger touchon the left to move it.If Some body can come up with thee answer it is the People that work in the Accessability side of things at Apple. So if you know in Ireland why Apple cannot put in the info for Accessability for People who are Blind like me we cannot see what is going on we do not change anyof the settings...

Thank you very much for the reply. That certainly makes sense, as I am sure it is all the Time Machine backups I have that are at the root of the problem. How can I update all those older version Apps deeply embedded within my TM backups, or is the solution to unmount my 2TB drive that I use for TM?
I suppose if Apple could somehow direct the App Store to disregard all those other apps in TM, the problem would be resolved.
 Nick Andriash 
17" MacBook Pro, 2.3GHz Intel Core i7, Memory 16 GB, OS X 10.8
AMD Radeon HD 6750M 1024 MB
iPad2 WiFi & 3G, 64GB
iPhone4S 32GB

Why is my YouTube upload not working in CC 2014.0.1?

I understand that the MOOV Atom issue was supposed to be fixed in the new version of PPro/AME released yesterday.
New to the issue? The MOOV (or Movie) Atom is a piece of metadata that belongs at the very top of a streaming MP4 file. In the previous iteration of PPro/AME, the YouTube upload was a two-pass VBR process and it put the MOOV atom at the END of the file; a third-party software, MP4 FastStart, was required to move the MOOV. Then, YouTube uploads went without a hitch.
"Without a hitch" means: YouTube acknowledges your upload and delivers the URL at which the video will appear when finished.
There is NO "Video/Audio Quality" warning! That warning, indicating that the video you're uploading is not a streaming video, is a sign of trouble.
I upload a 1 1/2 minute file and it appears to work perfectly i.e. no warning messages.
However, when I upload the full 2 hours 15 minutes, it warns. The warning is not without teeth: my first upload of my large video was still not ingested and processed by YouTube after 4 hours. It would display...but this lovely work that I had uploaded at 1080p was showing in 360p.
An additional issue is that the bit rate (8Mbps in the older version) has been bumped up to 16, making for huge upload files (literally double). Even after cutting the bit rate back in half to 8, it warns; I didn't complete the upload but suspect it still would not display properly.
I'm now uploading the work separately by act (1 hour 15 and 1 hour for the two acts, respectively). If that doesn't work, I will need to uninstall and carefully re-install the software, not allowing the update to install (I'm told by TS that this is possible), and then get my work done. I'd obviously rather not have to do that. I'll actually do the uploads to YouTube this time and see if they process fully, whether or not I get the "Audio/Video Quality" message in the beginning.
If anyone has any ideas (other than pointing out to the engineers via bug report that they seem to have messed up) I'm eager to hear.
Jay

Hi,
Please check this.
please have a look into this :
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename =
FILETYPE = 'ASC'** HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
you have file type here , just give the type whether XLS or CSV format or whatever.

Why sometime the STMS is not working??

Hi,
I want to know why sometimes the transport system (STMS) hang or is not working and I need to delete the entries in TRBAT and kill process in the O.S. Someone knows why this issue happen?
Thanks for the explication!

Please check whether the filesystem /usr/sap/trans is properly mounted in all the hosts ( All App. Servers and CI). Please ckeck the RDD* jobs. In case of a transport hang situation ( In this situation you can view so many truck sign in the import buffer), go to Import monitor and kill any transport request having the truck sign for a long time.
The transport hang situation may occur for the following reasons:
1. Filesystem /usr/sap/trans is not properly mounted in All App. Servers and CI
2. RDD* jobs are failing.
3. Kernel patch level is very old
4. Oracle client is not properly upgraded to the latest oracle release of the system
Thanks,
Sourav Misra
SAP Basis Consultant
IBM

Why is the youtube app not the new ipad

why dont i have the youtube app thingy that used to be there

Apple decided to remove google apps from being included in iOS. Google released an iPhone version of YouTube that you could install while we all patiently (or not) wait for google to make it universal...

Why Somtimes the notification alert not working in iphone 5s??

Notification alert is not working all times specially in whatsapp...i reset the phone and tried again the same thing is happening again...
Please help to fix it...:(

Does the charger-cable that came with the iPhone 6 work properly, does the extra charger work correctly with other devices? If so, could be an issue with the extended cable matching the new iPhone. You could take it to an Apple Store Genius Bar and have the techs check it to see why it won't work with the new iPhone. Could be the resistance is too high for the new iPhone.

Why is the charging cable not working on iPhone 6?

Hi guys,
I just bought a new iPhone 6 and i'm very happy with the phone itself. Natural upgrade from my old iphone 5. But i kinda feel ripped off by the following: I bought an official apple 2m lightning charger at an official apple seller about 6 months ago for about 30 euro (don't know the exact price). Worked perfectly with my iphone 5 and allowed me to use my phone in a better way while lying in bed. But when i try to charge my iPhone 6 with that charger it says that the asseccory isn't supported by the phone. It really ****** me off. Why is an official apple charger not supported on the iPhone 6?

Does the charger-cable that came with the iPhone 6 work properly, does the extra charger work correctly with other devices? If so, could be an issue with the extended cable matching the new iPhone. You could take it to an Apple Store Genius Bar and have the techs check it to see why it won't work with the new iPhone. Could be the resistance is too high for the new iPhone.

Why is the youtube is not working if i am connected with other wifi... But its working if im home... Help me guys

Similar Messages

Maybe you are looking for