Why is there a 64bit vista driver but not 64bit

For the Creative Zen 4/8/6/32... Title says it all...Creative have drivers for their soundcards on XP64.Message Edited by SpaceFarm on 2-7-200703:28 AM

signal static in either the cable, cable connectors, or in signal thru the DVI adapt./ cable.
"Mini Displayport to DVI adapter with a DVI to DVI cable"
excessive connector static points.
Elminating variables as per your above, your "DVI adapter with a DVI to DVI cable" is the source of the static.
Use another and eliminate the variable or dont use same.

Similar Messages

Why is there green pixels via DVI but not VGA

MacBook Pro
15-inch, Mid 2009
2.66 GHz Intel Core 2 Duo
8GB 1076 MHz DDR3
NVIDIA GeForce 9600M GT 256 MB
OSX Lion 10.7.5
Exernal Monitor: Samsung SyncMaster PX2370 (new)
When I use my Mini Displayport to VGA adapter with a VGA to DVI cable my external monitor displays a normal picture, no problems. When I use my Mini Displayport to DVI adapter with a DVI to DVI cable the external monitor displays a high res picture but is covered with green flickering pixels and sometimes white horizontal flickering. I have tried every resolution in the apple prefs, tried changing external monitor settings and I have also tried various adjustments with SwitchResX. I'm still getting the green pixels, etc and im out of ideas.... has anyone had/solved this problem?

signal static in either the cable, cable connectors, or in signal thru the DVI adapt./ cable.
"Mini Displayport to DVI adapter with a DVI to DVI cable"
excessive connector static points.
Elminating variables as per your above, your "DVI adapter with a DVI to DVI cable" is the source of the static.
Use another and eliminate the variable or dont use same.

I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

Try Handbrake (http://handbrake.fr/), it's good and free

In the AppStore in categories in free section there are iPhoto, iMovie, Keynote, notes. But they have the prices near them. If they are free, then why are there prices near them? If not, then why are they in the free section? Thank you.

In the AppStore in categories in free section there are iPhoto, iMovie, Keynote, notes. But they have the prices near them. If they are free, then why are there prices near them? If not, then why are they in the free section? Thank you.

They are free to People who have purchased ios devices after a cetain date(September 2013).
Those that have devices purchased before then have to pay.

Blocking downloads to hard drive, but not flash drives

Blocking downloads to hard drive, but not flash drives
A nonprofit has asked me to configure new Windows 7 computers so that all content is BLOCKED from the hard drive, but any downloads may be downloaded to the individual's flash drive.
The nonprofit allows individuals to play games, check e-mails, but we have a problem with them trying to upgrade Firefox, Google, etc.
They want all configuration to the DEFAULT STATUS after a person log off the computer....no upgrades to any programs!
I will occasionally upgrade programs once a month or so, as the volunteer administrator.
They have changed the controls from Windows ME and XP, when I was a computer programmer and installer (I also worked during Windows 3.11, 95 and 98/98 SE versions as well)...
Anyone help me, please?

1. You can change security with cacls function. However if you do it in wrong way, you can cut the branch you are sitting on:
http://technet.microsoft.com/en-us/library/bb490872.aspx
2. If you are working in Active Directory, consider Group Policy
3. Consider third pty software for granular access control (DeviceLock,...)
4. There is nearly nothing that you can transfer from previous technologies. (Even nice
steady state in Windows XP has no continuation. Consider
kiosk mode in Windows 8.1)
M.

Why can I only see iCloud Drive and not iCloud in Finder?

Why can I only see iCloud Drive and not iCloud in Finder? The latter is not available either under Favourites or Menu>Go>...
After a clean install of Yosemite 10.10.3 on a MacBook Pro, I chose not to upgrade from iCloud to iCloud Drive because it would break syncing with my iPhone 4. My docs are still visible in iCloud, according to System Preferences. I can access them on my iPad but I not from my MacBook Pro. Calendars and Contacts sync ok.
I tried logging out of iCloud, rebooting and logging back in, but that did not remedy the problem.
What's gone wrong?

Just so I'm clear. You have enabled iCloud Drive in your iCloud preferences:
Now, in your Finder's sidebar you still do not see the iCloud Drive showing. In the Finder's preferences is it checked:

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

HT1364 why will my ipad2 connect to itunes but not my iphone 4s

why will my ipad2 connect to itunes but not my iphone 4s

why will my ipad2 connect to itunes but not my iphone 4s

I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to "Apple ID and Primary Email Address." But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a). (@me.com addresses are no longer available as new addresses.) Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost. They are permanently tied to the original ID you used to purchase them. You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

I assume you have Photostream on, correct?
In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection. Both of these criteria must be met before the sync occurs.

Why apple lie people iphone 4s arrived but not in stock...?

why apple lie people iphone 4s arrived but not in stock...?

Contact 3 asap you may have been frozen because of inadvertant excessive
data use or more.
All you can eat does NOT apply overseas
AND if you did not enable roaming they will certainly believe your iPhone has been stolen
and taken out of the country

PSE 9 raw works on on Vista PC but not on XP PC

I purchased PSE 9 about a year ago. I love the raw editing capabilites
and the little window that the raw files open in on my Vista PC. I also installed PSE 9 on my netbook as the liscense said I could
install on up to 2 computers. The problem however, is that I can't get those raw controls to show up on my Netbook which has XP on it. Today I decided to uninstall the PSE 9 that was on the netbook and install it again but to no avail. I still can't get those raw controls to show up on my netbook. Why does this work on the Vista PC and not on the XP pc? Can anyone help me wiht this. I'd really like to get those controls onto my netbook so I can edit files in Oregon from my vacation while I'm there. thanks for your help. :-)

Wow so I guess I can't use them on my small netbook. That's kind of stinky :-( . Oh well, thanks for letting me know. I can still open raw files but I can't adjust sharpness, nose, wb or anything like that. Guess I'll stick to my larger computer for that stuff.

AEBS sees drive, but not the partition on it

Hi folks,
I try to connect a WD 1TB SATA2 drive in a Fantec USB enclosure* to my Airport Extreme Base Station. I have tons of stuff on the drive, "unified" from various older external and internal drives.
Now, while Airport Utility "sees" the physical disk in the list of Airdisks, it does not actually mount the single HFS+ (Journaled) formatted partition/volume on it.
1) It mounts nicely on my MacBook Pro, and I can also access it using MacDrive on my PC.
2) I checked it using Disk Utility, everything is fine.
3) I even checked it in Disk Warrior, and rebuilt the directory structure for good measure.
4) The partition's name is only 14 characters, no spaces, no High ASCII characters.
5) It mounts without problems on my Win XP PC with MacDrive 7 via USB.
I tried rebooting the AEBS, but no success. Another, older 250 GB external drive (also HFS formatted) connected fine, the volume immediately appeared in Airport Utility, no restarting necessary (sadly it's an IDE enclosure, not SATA).
*The Fantec enclosure uses a JMicron JM20336 SATA to USB chipset, if anyone cares to know.
EDIT: latest Mac OS, latest AEBS firmware 7.3.2, latest Airport Utility on Mac and PC, etc.
I'm stumped, why can't the AEBS see the volume?
I hope anyone has an idea what's wrong. Maybe the enclosure is not compatible with the AEBS?

Ok, I had the chance to test another SATA drive in the same HD enclosure, and Airport Extreme recognized the drive. It was formatted as FAT. Other partitions on the same drive were formatted NTFS, and the Airport warned me about a faulty disc.
In any case, it is now verified that it is not the enclosure, but seemingly the drive itself that isn't recognized by the AEBS.
Next, I did various tests to see what is wrong. Remember, this is a brand new 1TB Western Digital Green (3 platters, the most recent model). Other (smaller) drives in the same or other enclosures work fine.
*Test 1:* format the drive using HFS (Journaled)
Expected result: partition should mount as volume with name "xD".
Actual result: partition does not mount (as can be seen on the screenshot)
!http://666kb.com/i/b631xlvxyii0kboty.png!
*Test 2:* format the drive as NTFS using MacFUSE
Expected result: error alert by AEBS (faulty drive)
Actual result: no luck (see screenshot above)
NOTE: At this point, I didn't have the option in Disk Utility to format as FAT - I don't know why.
*Test 3:* format the drive as NTFS using a Windows XP PC using the Management Console
Expected result: error alert by AEBS (faulty drive)
Actual result: error alert by AEBS (faulty drive)
NOTE: After this test, the option in Disk Utility to format as FAT has reappeared. Maybe formatting in XP fixed some partition table error? Or the disk is now formatted in MBR mode rather than GUID?
*Test 4:* format as FAT (using Disk Utility)
Expected result: mount the partition
Actual result: partition mounts! As you can see in the screenshot, the volume name is "XD" instead of "xD" because FAT only supports upper case volume names.
!http://666kb.com/i/b632kbz0xp0lihk6u.png!
*Test 5:* format the drive as HFS (Journaled) again
Expected result: mount the partition
Actual result: Disk Utility fails to delete the FAT partition (see screenshot)
!http://666kb.com/i/b632se0dzj9fknwxi.png!
At this point, I am trying a few things to delete the FAT partition. First, I reformat using FAT, which succeeds. Formating as NTFS also works. I click on the drive icon rather than the volume icon, and see that the disk IS using the Master Boot Record scheme. I guess this is why I can't format the partition as HFS...
*Test 6:* re-partition the drive with 1 HFS (Journaled) partition, this time specifically setting MBR as scheme.
Expected result: formatting will fail, because I guess HFS doesn't work on MBR partitioned drives
Actual result: yup, Disk Utility fails to do this
*Test 7*: re-partition the drive, using GUID with 1 HFS (Journaled) partition
Expected result: partition mounts
Actual result: partition mounts - SUCCESS!
!http://666kb.com/i/b633840bd5mkinjw6.png!
CONCLUSION:
If a drive fails to mount in AEBS, there is most likely something wrong with the partition table. Try repartitioning the drive (either using GUID or MBR) and see if this fixes the problem.
Hope that helps,
Stefan

Why my brandnew L10-193 reads DVDs but NOT CDs?

Tehnical support of the company I bought the laptop said "this is not possible", but it is a fact. My laptop simlpy does not read CDroms, although it has no problem to read DVDs. I use Windows XP. Is it a technical defect?
by the way, it took me about 30 minutes to register myself in order to be able to attend this forum.. throught the registration-over-registration-line. very burocratic.
[Edited by: admin]

Hi
First of all I dont find that this forum or the login procedure is bureaucratic.
For me it was very simply and short login procedure.
But now something about your drive issue:
Did you test the drive with different CDs? Audio, data, etc
But nevertheless, try to remove the drive from the device manager. After rebooting, the OS should recognize the drive again. If after this procedure the drive will not read the CDs so in my opinion there is a lens calibration problem. I dont know why it is happened but the unit is under warranty. In this case the drive replacement will be done for free.

Why does Mail open in guest account but not my account since upgrade to Mavericks?

I've read a lot of threads but not found anything that works for me. The history is this:
I've upgraded to Mavericks 10.9.2. Since then, Mail won't open in my own user account. I only get a very brief error message:
Process:
Mail [1448]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.2 (1874)
Build Info:
Mail-1874000000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [157]
Responsible:
Mail [1448]
User ID:
I have gone to user/Library/Mail and deleted the contents of the folder Mailboxes + all the other mailboxes. No change - Mail still won't open.
If I switch user accounts to guest user, Mail opens normally (sets up email accounts etc).
Any advice would be much appreciated.

Rebooted in safe mode, repaired disc permissions, rebooted (again in safe mode) but no difference.
There was a bit more detail I could / should have added.
1) Before it crashes, Mail says it is Upgrading your Mail database.
2) I downloaded Mail update but Installer said none of the drives were compatible. (Anyway Mail works fine in Guest Account)
3) I've been through all the tips on this post https://discussions.apple.com/message/23490745#23490745http://
and
looked at Internet accounts in Preferences and none of my email accounts is checked with Mail. It asks for a password for each one but when I provide it I get the message Unable to verify account name or password. And if I try and uncheck iCloud with Mail I get the message that I need to do that from within Mail. (Obviously not possible until I can open Mail).
In Terminal tried defaults delete com.apple.mail ColorQuoterColorList but got the message that it hadn't been done.
Tried to find Envelope.x.x files as per this fix:     Final solution: Go into ~Library/Mail/V2/Mailboxes > Delete all mailboxes. Then go to ~Library/Mail/V2/Maildata and delete 3 or more "Envelope.x.x" files > Restart Mail, and enjoy your success.     but don't have a V2 folder nor Envelope.x.x files. I do have Envelope Index file and Envelope Index - journal
I don't suspect 3rd party applications because I think they are all available in the Guest Account aren't they?
Many thanks for your reply though. Any more ideas?

Why is there a 64bit vista driver but not 64bit

Similar Messages

Maybe you are looking for