Why is there a problem with Setup.exe when upgrading from 2.0 to 3.6.3?

I am trying to upgrade Firefox on a laptop that currently has 2.0. I downloaded 3.6.3 and opened setup. I get an error message indicating that setup cannot run setup.exe. It advises I restart my computer. When I do, it does no good. Please advise.
== This happened ==
Just once or twice
== I tried to upgrade from 2.0 to 3.6.3.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Similar Messages

Problem with Navigation Attributes when upgrading from BI 3.1 to BI 7.0

Hello,
I have the following problem that occured regarding queries during the upgrade from BI 3.1 to BI 7.0:
As far as the queries are concerned it is not possible in the 7.0 system to completely rebuild them according to the queries in 3.1. More specifically this refers to a certain number of navigation attributes that cannot be integrated into the query. In this case the following error message appears: "Error in BW: Missing mapping partprov cha <-> multiprov cha". Moreover, this error message only appears when you try to include navigation attributes into the query that are all attributes of the same specific InfoObject.
I have already checked in the 7.0 system if the relevant objects have the status 'active' and if the identification between the Multiprovider and the InfoObjects used is correct. So, is there anybody who may has another idea why this error message appears respectively who experienced the same/similar problem?
Thanks in advance & Regards

Hello Martin,
yes, I've also checked the identification in the MultiProvider for the navigational attributes. There is nothing missing.
I've also reactivated the objects.
Do you may have another idea?
Thanks and regards, Ines

Problem with explorer.exe when LR starts

When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAM

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Do you see problems with text size when importing from Photoshop?

Hi all -
We're working on improving some things in the Photoshop-to-Reflow workflow, and right
now specifically investigating trouble with imported text.
Aside from the desire to have support for local fonts, are there any problems you run into
when importing text from Photoshop into Reflow? We've heard some issues with text size and position,
but want to make sure we understand all of the cases.
If you have problems in this area, please share them in this thread, and I'd also love to get some
sample PSDs that demonstrate the problems. (You can send them directly to me; vmitnick at adobe dot com .)
thanks,
Vic

I'm using CS4.. and I'm using the standard "Save As" .pdf features....
and I'm reading it with adobe acrobat pro 9.1...
i think it has something to do with compression. but i can't figure out how to solve it. converting the text to symbols maybe?

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

Hi,
I have problems installing LMS 3.2. I get the following error during the installation process:
I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Problem signature:
Problem Event Name:                        BEX
Application Name:                             setup.exe_InstallShield
Application Version:                           15.0.0.603
Application Timestamp:                     4a030a42
Fault Module Name:                          ErrStack.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  4a1c4e04
Exception Offset:                                02ac26a0
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.0.6002.2.2.0.274.10
Locale ID:                                             1033
Additional Information 1:                  b2be
Additional Information 2:                  82109204b3973566ace818217390e302
Additional Information 3:                  9025
Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Regards
Mathias

This looks like CSCte84743.
Symptom:
Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant. The error seen will be related to OpsConfUpdate.exe:
The application has failed to start because GGShared.dll was not found. Re-installing the application may fix this problem.
Conditions:
This can occur on Windows 2003 and 2008 servers. The underlying root cause is still not known.
Workaround:
Configure the following registry key value:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
Then, a clean installation of LMS should be performed. Once LMS is installed, this registry key value should be removed.
However, the problem with the page not found error could be CSCtb17186. If you try Firefox and get a redirection error, then that would confirm this bug.

Problems with Capture Date when converting from PSE9

I'm trying to troubleshoot a problem I'm having when converting my PSE9 catalog to LR3.4. Specifically, about 20% of my images (abouit 2,500 out of 12,000) didn't import with capture dates. I can clearly see the correct capture dates in PSE9 Organizer, but when I view the same imported images in LR3.4, there is no date. This occurs with dates that I've modified in PSE9 as well as dates straight out of the camera.
This is a major problem for me because I'm used to organizing my photos in PSE9 using capture dates. On a related note, PSE9 allows you to set the capture date to a known year and unknown month, day, and time, but when imported into LR3, these dates are converted to Jan 01 of the known year. Sorry, but Jan 01 is not the same as unknown. Is there a way to correctly display unknown portions of a capture date in LR3 similar to the way it's displayed in PSE9?
Sorry if this has been discussed before.

How did you convert your catalog? Did you use File > Upgrade Photoshop Elements Catalog, or did you use File > Import Photos? You should use the former; the latter has many problems, among which PSE doesn't always correctly write medata (e.g. capture dates) into files. If you used File > Upgrade Photoshop Elements Catalog, post an image here and we can take a look at its metadata to troubleshoot.
function(){return A.apply(null,[this].concat($A(arguments)))}
On a related note, PSE9 allows you to set the capture date to a known year and unknown month, day, and time, but when imported into LR3, these dates are converted to Jan 01 of the known year.
Even though Adobe's XMP metadata standard allows for unknown month, day, or time, most programs including LR don't support it -- PSE is the only program I know of that does (and it has problems). I use the conveniton of 1/1 12:00:00 to represent unknown values.
See this FAQ for other issues with converting PSE catalogs to LR:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Converting_to_Lightroom

Problems with custom authentication when migrating from 3.2 to 4.1.1

Hi,
we’re about to upgrade our APEX instances to 4.1.1 and to migrate our applications. I encountered some problems with our custom authentication schema.
1. Recognize already authenticated sessions: in 3.2 the sentry function could return false as long as the user was not authenticated. Public pages could still be displayed (including the login page). The result of the function apex_custom_auth.is_session_valid returned false until once the sentry function returned true. How can I recognize non authenticated sessions in 4.1.1? I looked for the test the Condition “User is the public user (user has not authenticated)” computes on a page but didn’t found the right one. It’s not what docu states here (comparison with the public user): http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/condition001.htm#HTMDB25943. I replaced the test with p_authentication.username = ‘nobody’. It works. But that doesn’t seem to me to be the right way …
2. Post_logout lacks session context: the Post Logout Procedure does not receive a session_id and username. Neither the V(‘APP_SESSION’) nor p_authentication.session_id are set. This applies to both plugin authentication schemes and non-plugin custom authentication schemes. Is there another way to obtain the logged-out sessions infos or is this a bug?
See apex.oracle.com for a demo, workspace WS_MW, gast/gast. Can someone please guide me the way?
Michael

Hello again,
there are no replies until now .... I reviewed some posts regarding custom authentication again and did not find any solution for the issues. Found some that worked with APEX 3.2.1 but not with 4.1.1. I can only work around
1.) in an insecure way, because the non documented (?) user "nobody" can change and all new sessions will be considered authenticated
2.) in a way, that ends up in implementing the logout from the non apex environment outside the authentication schema or authentication plugin.
May be I should contact support for at least the second issue because this doesn't work as documented or am I doing something wrong?
Michael

Problem with redirect script when calling from external - UCCX

Hi,
I have a problem with external calls not being redirected when the call comes from an external that begins with a certain prefix on teh ANI.
The call path goes PSTN - VGW - UCM SUB - UCCX.
To give you info this should be redirected to a auto attendant on unity but it just hits the fourth option unsuccessful.
If i change it to match an internal ANI and test it works.
What trace and log do i look at to see the call coming in from the UCM and what is happening with it why this is failing when it trys to redirect a call coming from external?
I have also attached my script.
Thanks for the help.
Kev

Hi Martin Braun,
Go to GUI status which you set in the PBO of your screen,
and open "Function Keys" part.
You should have set function key F4 for a button on your GUI status,
delete this button and create with another function key again.
I hope it helps.

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

Hello together,
The system of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
In the Billing Due List a dump occurs when clicking on an item and then on conditions
Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
(Other classes are new generated after the upgrade)
During the Analysis we looked to the billing engine navigator:
In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
BR, Anne

Hi Nawanit,
we checked the key figure settings and categories. Everything is maintained correctly.
Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
"Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
As far as we work with ECC 6.0, EHP4 this message makes no sense.
Does anyone have another idea?
Thanks
Jan

Problem with field catalog after upgrade from 4.0

Hi experts,
We have recently upgraded from CRM 4.0 to 5.2.
I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
Any comments or suggestions will be highly appreciated.
Best regards,
Anders

Hi,
If you did just install database, then you use Embed PL/SQL Gateway.
See this guide
Upgrading Oracle Application Express in Oracle Database Express Edition
I think you have not run step 5 script apxldimg.sql
Regards,
Jari

Problems with german umlauts when Migration from MS Access to Oracle

When I make a Migration from MS Access 97 to Oracle 8.1.5, I have Problem with the germans characters (umlauts). The Oracle is using the rigth character Set for german characters. What can I do? Is it e problem from the MS Access ODBC Driver or the Oracle ODBC Driver?

Is your character set for Oracle set up to UTF8??

Problem with 4 displays since upgrading from 10.3.9 to 10.5.6

I was happily running 4 displays from my 2 graphics cards (9600XT and 9200) under 10.3.9. 3 x DVI (one of which is with the ACI adapter) and 1 running via VGA to a plasma TV. The 3 displays running from DVI were all "name" recognized and all resolution options were available.
I have now upgraded to 10.5.6 and suddenly two of the displays are recognized and I am only given a single, low resolution option on the other two - also on these two affected displays, display the Leopard background (the Universe pic) is mainly blue - almost like when you have a loose cable (but they are not).
The problem is not card specific i.e. it seem to effect one socket from each card.
I have tried swapping the displays between the cards and when I do the alternate display is then recognized so it can't be a problem with any of the displays either.
Any ideas? I need all 4 displays running in their respective resolutions (and without a blue screen) for Logic screenshots.

I was happily running 4 displays from my 2 graphics cards (9600XT and 9200) under 10.3.9. 3 x DVI (one of which is with the ACI adapter) and 1 running via VGA to a plasma TV. The 3 displays running from DVI were all "name" recognized and all resolution options were available.
I have now upgraded to 10.5.6 and suddenly two of the displays are recognized and I am only given a single, low resolution option on the other two - also on these two affected displays, display the Leopard background (the Universe pic) is mainly blue - almost like when you have a loose cable (but they are not).
The problem is not card specific i.e. it seem to effect one socket from each card.
I have tried swapping the displays between the cards and when I do the alternate display is then recognized so it can't be a problem with any of the displays either.
Any ideas? I need all 4 displays running in their respective resolutions (and without a blue screen) for Logic screenshots.

Problem with data format when getting from a database

I'm trying to get a date from the database but the problem is that it also return the time. I have tried to change the format of the date when retrived from my database but it still returns the time.
Any solutions?
String theDBDate = rset.getString("date_of_call");
SimpleDateFormat formatterdate = new SimpleDateFormat ("EEE, MMM d, ''yy");
String date = formatterdate.format(theDBDate);
theCalls.setDateofCall(date);// callin my Call Class to store the date which is a string

Hi could any help me? I have this problem for the last few day. I gave up on it for a while but today I'm trying to get to the botton of this problem.
I connecting to an oracle database but it return back the date & time but I want only the date.
Here my code.
Locale currentLocale= new Locale("en","GB");
Date today = new Date();
DateFormat formatter = DateFormat.getDateInstance(DateFormat.DATE_FIELD,currentLocale);
String theSQL = (" Select * From Call ") ;
Statement stmt;
stmt = conn.createStatement();
ArrayList CallsList = new ArrayList();
ResultSet rset;
rset = stmt.executeQuery(theSQL);
while(rset.next() == true)
Call theCalls = new Call();
theCalls.setCallNo(rset.getInt("call_no"));
theCalls.setUsername(rset.getString("username"));
theCalls.setCompID(rset.getString("comp_id"));
theCalls.setTimeofCall(rset.getString("time_of_call"));
Date todaydate = rset.getDate("date_of_call");
Timestamp theDBDate = rset.getTimestamp("date_of_call");
SimpleDateFormat formatterdate = new SimpleDateFormat ("EEE, MMM d, ''yy");
String date = formatterdate.format(theDBDate);
theCalls.setDateofCall(date);
theCalls.setPriorty(rset.getString("priorty"));
theCalls.setProbCat(rset.getString("problem_cat"));
theCalls.setProbDesc(rset.getString("problem_desc"));
theCalls.setCloseDate(rset.getString("close_date"));
theCalls.setProbSol(rset.getString("problem_sol"));
theCalls.setStatus(rset.getString("status"));
theCalls.setAssign(rset.getString("assign"));
CallsList.add(theCalls);
conn.close();
return CallsList;

Why is there a problem with Setup.exe when upgrading from 2.0 to 3.6.3?

Similar Messages

Maybe you are looking for