Why is there a thin gray line at the top of my home screen on iPhone 6plus?

The top of my home screen has a thin gray bar and the very top of my iPhone 6plus

Hey Alliemac71639,
Thanks for the question. I understand you are experiencing issues with your iPhone 6 Plus display. The following resource outlines some great troubleshooting steps::
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
1. Try turning iPhone off and then on again.
2. Verify the issue is not content related, by viewing different content.
3. If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks,
Matt M.

Similar Messages

  • Why is there a thin vertical line on the copy when I use the feeder?

    There is a thin vertical line on copies when I use the feeder but not when I copy from the glass. The copier is new. Any ideas?

    Hi Ccorning, When a vertical line (top to bottom) is produced only when using the feeder (ADF) of your laser product, the issue would actually be due to a small mark or debris on the scanning glass area that sits directly under the left panel cover of the ADF.  This occurs because as the paper feeds through the ADF and across the scanning area, every inch of the paper passes over the small mark which gets picked up by the scanner.  This then produces what looks like a line.  However, thorough cleaning can resolve the issue. You can clean the platen glass and the underside of the ADF by following the procedure below. 1.  Turn OFF the Main Power Switch and disconnect the power cord. 2.  Open the ADF. 3.  Clean the ADF scanning area on the left side of the platen glass and the same area on the lid (the area that would touch the scanning area when the lid is down) with a cloth dampened with water.  You will want to carefully and fully clean the glass in the ADF scanning area.  Look for scratches, tiny spots and marks of any sort.  If marks are noticed, you may have to clean the platen glass up to three times or more depending on what created the mark (i.e.. correction fluid, pen ink).  You can use a soft lint free cloth either dry, with glass cleaner or water to clean the glass and may have to scrub until it squeaks to remove certain types of marks.  NOTE: Please spray the cloth with the cleaning solution and not the glass.  Another way to ensure the mark is removed is to use a credit card by placing in on a angle and sliding it across the glass in one direction.  The plastic of the card will not scratch the glass.  You can then lift the credit card when reaching the end of the glass and return to the other side to slide it across again.  Then wipe the area with a soft, dry cloth. 4.  Close the ADF. 5.  Reconnect the power cord and turn ON the Main Power Switch. Caution:  Be careful not to get your fingers caught. After cleaning the glass, run 4-5 blank/clean pages through to test it.  If the thin black line still appears, please try cleaning the scanning area again as a mark on the glass is the only cause for this.  If the issue persists, there may be a scratch in the glass which would require service. If further assistance is needed, please feel free to Contact Us.

  • Why is there a thin dark line between two of my three cover images that wasn't there before?  When I delete the images, you can tell that there is extra space between the first two image boxes.

    Getting ready to purchase my first book, I looked over everything once more and noticed that there is now a thin gray line between the first two of my three cover images.  I believe this may have happened when I switched out the left image.  When I delete the images, you can see an extra space between the center and left image boxes.  How can I fix this without starting over?

    What size book? Are you previewing this way -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • Why is there a strange grey object on the top left corner of my iPhone?I have included a photo

    Why is there a strange grey object on the top left corner of my iPhone? I have included a photo. It randomly appears and disappears.

    Hey Scott! Like I said, I thought I had done some damage -- even though the drop was just a couple of inches that was my very first thought, but when it came and went with which app I was in (or not) I knew it wasn't a damaged SCREEN.  So I wondered if it was a different damaged part, memory or some such.
    When I saw that others had the exact same shape, I could only imagine that perhaps the phone was indicating it was running a diagnostic, had been forcefully dropped, had a faulty/damaged accelerometer or some other purposeful object.  It clearly wasn't random, it was a definite shape.
    Hey Paul!  I'm hoping they've seen the issue and tried replacing a few parts or something...  Ya never know.  As a (mostly) retired guy I have the time!
    I also mentioned in a kind of oblique way that I had enabled the Kanji keyboard.  I should also mention that I have the field strength test enabled so that I am able to see the -db numbers instead of the antenna bars.  That's right in the same area, so it could be related.... maybe... or not. The screen was unlocked when this happened and I'm guessing I pushed a whole lotta buttons and/or icons as I was grabbing at it... I wonder if it is possibly an easter egg of some sort -- just the right combo of touches.  Then again, it bounced right on THAT corner... LOL 
    That's the only stuff I've ever done to the phone.  It's never been jailbroken or anything like that.  It has taken a few falls in its lifetime but none resulting in any obvious damage.
    It's a 32GB iPhone 3Gs and it is now 2 years old (bought June 27, 2009.) I'm just happy that it seems to be OK.  While Apple's stock may be the largest market cap in the US, my portfolio sure isn't.

  • Why is there a line at the top of my computer screen

    why is there a line at the top of my brand new macbook pro? it goes right through the top of the grey bar where the date time and everything is located?

    Don't know.  Ask Apple when you send the computer back to them! 
    You have 14 days from the date of purchase to return your computer with no questions asked.

  • There is a blu line at the top of my screen after upgrading to iOS 8.3.  How can I get rid of it?

    Why is there a blue line at the top of my screen after upgrade to iOS 8.3?

    Try the basic troubleshooting:
    Restart / Reset
    http://support.apple.com/en-us/HT201559
    Restore from backup
    Restore as new
    http://support.apple.com/en-us/HT201252

  • My Classic developes two thin horizontal lines across the top third of the screen.

    After a day using my classic in the car, I plugged it into its speaked dock and niticed two thin horizontal lines all the way across the top third of the screen.
    Does anyone know how to get rid of them pleaase. Thx

    You can try Resetting the iPod, won't work, if LCD screen is damaged or the display chip surface mounts has gone wobbly, which mean going in for servicing.
    Otherwise.
    Press Menu and Center button for 10 secs till the Apple logo comes on, then release the buttons.

  • Why have I got an exclamation mark in the top left corner of my outbox iphone 5

    I sent a message to a third party and it got delivered ok. Since then I am now seeing an exclamation mark inside a red area in the top left hand corner of my iphone 5. I've tried logging out of Yahoo and then back in. I've switched my phone off for two minutes and then gone back in but the thing is still there?
    Help please anyone.

    Can you post a screen shot.

  • I have a 2 inch gray bar across the top of my home page now after dragging a few windows around my desk top. I'm not sure if it's a mozilla thing or google thing but it just appeared and I would like to get rid of it. g

    My home page is just www.google.com with a search box and a picture of some planets as a background from my computer. While I was dragging the restored down browser window, I slipped with my mouse and now I have a light gray two inch bar across the top of my background picture. It's below the; Search-Images-YouTube-News-Gmail-More icons. When I right click on it and select inspect Element (Q) it says div#gbx1.gbqfh in three different colors. I would like to get rid of it, but I don't know if it's a google or Mozilla issue. I know google has been changing things so it wouldn't surprise me if it was just a coincidence.

    Is there any text in that gray bar?
    I see some buttons on it, do they have a tooltip?
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Are you using a proxy to connect to the internet?
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • Why is there a large grey roundel at the top of all my mail messages?

    I don't want this to happen:
    Suddenly, in Mail in Yosemite, every outgoing and incoming message displays a large grey roundel at top right, beside the date, containing the initials of the person who sent it. If I sent it, the initials are mine. If it was sent by somebody else, their initials show.
    I didn't ask for Apple to do this, I don't see the point of it, and I want to stop it from happening.
    Does anyone have any suggestions as to how I can do this?

    Hey Alliemac71639,
    Thanks for the question. I understand you are experiencing issues with your iPhone 6 Plus display. The following resource outlines some great troubleshooting steps::
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1. Try turning iPhone off and then on again.
    2. Verify the issue is not content related, by viewing different content.
    3. If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Purple line at the top of MacBook Pro Screen

    This purple line has appeared recently, I don't know what is causing it. I can see it in the dashboard space, mission control, and at the login screen. 
    http://twitpic.com/8mk2rp

    Don't know.  Ask Apple when you send the computer back to them! 
    You have 14 days from the date of purchase to return your computer with no questions asked.

  • Why do i have a lock icon on the top right of my screen??

    how do i get rid of it?

    Open Control Center by swiping up from the bottom of the screen and tap on the highlighted Lock screen icon.

  • Why is there a thin rectangle beneath the launchpad icon in my dock?

    Why is there a thin, empty rectangle beneath the launchpad icon in my dock?

    You can try this, may help.
    Go step by step and test.
    1.  Restart the computer.
    2.  Startup into SafeMode
         Start up in Safe Mode. http://support.apple.com/kb/PH18760
    3. If the steps given above  don’t help, try restarting the Dock.
        Restarting the Dock:
        Applications > Utilities > Terminal
        Launch Terminal.
        Wait until the $ sign shows up.
        Enter the command     killall Dock 
        Press the enter key on the keyboard. Wait until the prompt shows up.
        Quit Terminal.

  • 6th Gen nano has thin white line around the icons and wont respond to touch

    Hi
    I sent away my 1st Gen nano and got sent one of the 6th Gen ones. When recieved there are thin white lines around the  icons and the screen doesnt not respond to touch. I have reset and reset and nothing has worked

    Sounds like VoiceOver has been enabled.  See this article for instructions on turning it off.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

Maybe you are looking for

  • Back Button not working in FireFox 4

    Is anyone else having trouble with the back and forward buttons not working in FireFox 4? I installed 4 on an XP desktop and a Vista 64 laptop, and the forward and back buttons don't work on either installation. Does anyone know a fix for this? I tri

  • Regarding remote login in IDOC to FILE Scenario

    Hi Friends,       I have been struggling from this issue from many days. when i am doing IDOC to FILE Scenario, i was posting an CREMAS03 IDOC from ECC client 800 to SAP XI Client 001.       After executing WE19 in SAP ECC, its automatically asking f

  • How to show  a fixed number of rows in JTable

    Hi, I have to show only a fixed number of rows in the table . After scrolling number of rows must not be changed.

  • Airline Reservation System

    An Airline wants to design a reservation system based on the following conditions: �h Each Plane has capacity of 10 seats. �h Applet should display the following options at the top of applet window ��Please type 1 for ��Non-Smoking�� ��Please type 2

  • Reveresing black and white still Photoshop image in FCP?

    is it possible to reverse the black and white of a still photoshop image within FCP? then remove the background apart from the letters? need to get a black and white company logo into FCP for use in the credits of this programme - due to a graphic de