Why is there a white line around 1200 pixels and will it show up when I publish the site?

Hello,
I am working on creating a website through Muse and as soon as my website exceeds 1200 in height, it shows this white line. How do I get it to go away or will it go away when I publish the site?
Thank you.
Nicole

There is not such a limit. Could you post a screenshot of this white line?

Similar Messages

Why is there a white line o my screen when the screen is a darker color

why is there a white line o my screen when the screen is a darker color

Please post a screen shot of your display. It will help to determine what needs to be done.
Ciao.

There is a line around my image and i want to get rid of it. is there an easy way?

that is the image i am editing, please help i need this done asap

You can simply paint over the lines with white. A bit tedious but shoudn't take long.
Or a quicker way:
1. Use the Color Picker to select the image color.
2. Activate the Magic Wand and uncheck the Contiguous box.
3. Click anywhere in the color to select all of it.
4. Invert the selection and fill with white.
Note: After step 3 you might want to smooth the selection to minimize the "jaggies". In my PSE version this is via Select>Modify>Smooth. Here is a comparison without Smooth and with Smooth value 5.
Here is the smooth version if you want to save it:

Why is there a white line on my screen

i cant get it off i put it down on my dresser and it was charging and when i picked it up it had a white streak and i cant see half the screen

This may count as a White Screen.
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
Source: http://support.apple.com/kb/TS3474 (may not be the same gen for ur nano.... but this shows on all iPods)

Why is there extra white space around an imported image?

I had made a JPEG2000 format image sized at 119 pixels wide by 142 pixels tall. Went to convert it to a pdf file and Acrobat took the liberty of enlarging the images size to what I assume is the smallest size supported by the format.
Any ideas on how to resolve this without having to open and edit the pdf directly? Ya know, during export.
Acrobat Version: XI Pro

The new Acrobat size is formatted at 1 inch by 1 inch (300px x 300px). Importing this new *.pdf file back into photoshop interestingly reduces this back to the original size, however, handling of the pdf when importing into say, InDesign, will retain the new size. This might be just be a media box, but I would rather change the formatting than adjust placement options every time.
I am subscribed to the full CC Suite.

TA24927 My videos aren't showing when I open Iweb, but they do show when I publish the site, any ideas why?

They do play in the browser just not in the application, makes it hard when I try to organize the page

Well, if the video displays after publishing then nothing is wrong.
If you cannot see the video in iWeb, then your code probably does not allow it to display in the application.
In that case, imagine that you see the video.
If that's too difficult, use a picture.

When i turn my mac on i get the white screen and a progress bar that when finished shuts the computer down

i recently came back from holiday and tried to start up my laptop (that stayed at home, just shutdown but plugged in). when i turned it on, i got the apple white screen, a timer wheel and a progress bar that when it reached the end of the bar, it just shut the computer down again. i cannot get past this screen and the mac will not turn on. does anybody know how i can fix this please?

Your hard drive is dead and you'll need a new one. If you're the least bit handy, you can replace the drive yourself. You need to decide what capacity and speed you want out of a new drive.
I'm hoping that you had backup schemes in place? If not, there's a chance that, with a tool such as DiskWarrior, you MIGHT be able to grab some data from your dead/dying drive.
Clinton

White line around image

Hi everyone,
I keep getting a white line appear around images I save in
Photoshop and then insert into Dreamweaver. It happens when I also
save text with a transparent background. The text has a very faint
white line around it. Why is this?

Where are you seeing this, in PS? or DW design view or in a
browser?
When you insert your pics in an HTML page with 0 border, do
you still see
the border?
This is not a graphics forum. Adobe has a PS forum at
http://www.adobeforums.com/cgi-bin/webx?14@@.3bbf2764
"dollecom" <[email protected]> wrote in
message
news:e5f6cq$fb7$[email protected]..
> Hi everyone,
>
> I keep getting a white line appear around images I save
in Photoshop. It
> happens when I also save text with a transparent
background. The text has
> a
> very faint white line around it. Why is this?
>

DW8-Fine white line around images

DW8 - On some of my images there is a very fine white line
around the edge when the site is previewed in the browser. The site
has an almost-black background color (181714), and I use the same
color in making the image backgrounds (in Photoshop CS), for
example roll-over images. How do I get rid of this?

You wouldn't set this in the Property inspector, you'd set it
in the CSS,
and the only time you need it would be when the image is
within a link:
a img { border:none; }
Also, you wouldn't expect this effect to produce a white
border - it would
be a blue one (by default).
I'm guessing the fine white line is part of the image (it's
easy to
undercrop when the canvas is white).
> I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
If you have nothing there, you will get the default value for
the all of the
table attributes, which is often (but not always) not zero.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Damaeus" <[email protected]> wrote in
message
news:[email protected]..
> Reading from news:macromedia.dreamweaver,
> "Fugasi" <[email protected]> posted:
>
>> DW8 - On some of my images there is a very fine
white line around the
>> edge when
>> the site is previewed in the browser. The site has
an almost-black
>> background
>> color (181714), and I use the same color in making
the image backgrounds
>> (in
>> Photoshop CS), for example roll-over images. How do
I get rid of this?
>
> Check to make sure that your image border is zero in the
Properties
> Inspector in Dreamweaver for the specific image in
question. I've noticed
> that in tables, having nothing there is "bigger" than
specifying a zero.
> I
> don't think I get a white border around images with
nothing in the image
> border width setting, but see if that works?
>
> Damaeus

White lines around texts with object effects applied

I am having a persistent problem with InDesign's output of PDFs when I have applied object effects to text boxes.
When I use an effect—such as emboss (shown in samples) or outer glow—on a text box, the PDF renders it with white lines around the text boxes (sometimes with more than one).
See the attached samples; the boxes are clearly visible with a 3rd party PDF viewer, such as Skim; less so with Acrobat Pro, but still there. It's there when I open the PDF in Photoshop, as well.
I've tried playing with transparency flattening settings, and with merging the layers into a single layer. No help.
The sample shown has an emboss effect applied, transparency flattening set to high resolution (ignoring style overrides), and a single merged layer.
Any help?
In Acrobat Pro:
In Photoshop:
In Skim:

Thanks so much, Bob.
My printer requires that I use the PDF/X-1a:2001 standard for PDF export, which means that it must be Acrobat 4 or later compatibility.
Also: I don't see how to NOT flatten, when exporting PDF for print; the options for flattening are "low resolution," "medium resolution," or "high resolution"—but there is not an option to NOT flatten. Do you know a work-around for this?

6th Gen nano has thin white line around the icons and wont respond to touch

Hi
I sent away my 1st Gen nano and got sent one of the 6th Gen ones. When recieved there are thin white lines around the icons and the screen doesnt not respond to touch. I have reset and reset and nothing has worked

Sounds like VoiceOver has been enabled. See this article for instructions on turning it off.
iPod nano (6th generation): How to use VoiceOver
B-rock

Annoying white line around artwork

There's a strage thin white line around a black artwork, it's easier to see it with red background.
It's hard to see it so i zoomed in.
Here's the Appearance panel with this object selected:
How do I get rid of it?
Illustrator CS5
Windows 7

Set your black artwork to either:
Overprint and view in Overprint Preview or Multiply (in Transparency).
That way you won't see the white lines.
On the other hand, although they won't show up in print, those white lines (when viewed in CMYK preview) can sometimes be a useful indicator that an overprint is required.

Why do I get white lines surrounding transparencies when exported as a PDF for print - Indesign Vers

Why do I get white lines surrounding PSD or Tiff transparencies when exported as a PDF for print - Indesign Version 9.2?
I recently upgraded creative suite - now I am having issues with white lines surrounding any tiffs or PSDs when exporting for print.
I initially thought it was an acrobat viewer problem, but it seems to be effecting print. Please let me know if anyone knows the answer to this problem. thanks!

PDF settings? Flattener settings? Overprint and trapping settings? You need to be much more specific. Eitehr way, ask in the ID forum.
Mylenium

After importing pictures they became grey with doted white line around

I have imported pictures (RAW CR2 format) from my camera hundreds of times and they all went well. But this time the only the import worked well (I saw the preview when each picture was imported). Then Iphoto asked if i would like to delete the pictures on the camera after import. I deleted them. But then when I should take a look at the pictures they were grey with doted white lines around all of them. When I chose a picture and check the properties I can see that the pictures use normal space. I tried to drag one picture to a directory in the finder but this didn´t work either. The export doesn't work either. When I scroll fast among the pictures I can see them for a short period but when I stop scrolling they will turn grey with doted white line around. Whats wrong? and how to solve?
system: iPhoto11 and Lion.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Help!! White line around image with placed in Illustrator from Photoshop, possible CMYK issue?

I have a CMYK file, outlined product, that looks perfect in Photoshop. When I place the image into Illustrator, it shows up with a thin white line around parts of the product (fyi - it shows up on a print as well). I have tried to place an RGB file and it does not have the white line around the product. I assume it has something to do with it being CMYK, but I'm at a loss on how to fix this. I'm desperate for any help.

Okay, please refer this image and change the option within Ai General preferences. Uncheck the option Anti-Aliased artwork.

Why is there a white line around 1200 pixels and will it show up when I publish the site?

Similar Messages

Maybe you are looking for