Why is there another cell # on my statement?

It doesn't match my current cell #...Not sure why.... Because that number is not mine... And I am not paying for someone else's services.
And also why it take about 10 emails and like 10 hrs to send 27 pics from cell via email to my desktop? Not sure why it took that long to send many emails via phone so I can download the pics... Because the phone would not allow me to download the pics via usb cord. Not sure why on that either...

You would need to contact Customer Support about the cell number on your statement; this is a customer-to-customer forum and we don't have access to anyone's accounts.  Have you checked your on-line MyVerizon account to see if any changes have been made (assuming you are the Account Owner)?
I don't know why you couldn't transfer your photos via USB cord.  If we knew which phone you have, we could offer suggestions.
Customer Service:
Dial *611 from a cell phone
(800) 922-0204 from a landline
Monday - Sunday 6 am - 11 pm

Similar Messages

  • Why is there another persons name on my emails received

    On occasion when some cc me in an email, it has my correct address, but not my name attached.

    I’m not sure this is helpful, but I have recently experienced and, hopefully, solved a somewhat similar problem. In my case, I suddenly started receiving emails from various websites which have periodically contacted me, with the “To:” reading not me but a different name though the pulldown arrow showed my correct email address. I had only recently entered that name in my Address Book. I then learned that the person with the other name had also been hit with something similar to my situation. When I realized what was going on, though I have never understood its purpose, I immediately did two things. I deleted that name in my AB. And, following the suggestion of someone in another thread on this Forum, I went to my Apple Mail Preferences/Viewing and unchecked Use Smart Addresses. The latter causes both recipient name and email to show rather than just the name, thus eliminating the hidden feature. There was also a scheduling aspect in all this, since, from time to time through the day, the names would switch from mine to the other one. Since I made those two simple changes, everything seems back to normal, the "other" name has totally disappeared,though I’m still a bit leery regarding what the Trojan or whatever was all about. So you should check your relevant Address Book entries including the one for yourself, and the Use Smart Addresses, maybe, for a start. Luck.
    Frank

  • After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

    After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

    We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
    much smaller then than they are now.
    The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
    fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
    Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
    Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
    I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

  • I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is

    I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is my download messed up and not giving me everything I need?

    Got a link showing us which video tutorials you're watching and examples of what's missing in your software?

  • I want to download pages, it won't let me. Says it need os x 10.9 or later-I have os x 10.8.5-all updates have been done. Why is this? what can i do? Is there another pages app i can use? thanks

    I want to download pages, it won't let me. Says it need os x 10.9 or later…I have os x 10.8.5…all updates have been done. Why is this? what can i do? Is there another pages app i can use? thanks do i need to download maverick? thanks

    Pages 5 requires OSX 10.9, for some reason that only Apple knows. Many users will not be able to install Mavericks on their Macs or do not want to.
    It has simultaneously removed iWork '09/Pages '09 from the App Store.
    You could ask Apple why it does things like this, but it doesn't say.
    If you don't already have iWork '09 I believe you can still purchase it from Amazon.
    Peter

  • Can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?

    can someone tell me why a standard microphone doesn't seem to work with a mac-mini? Is there another kind of microphone I need to use?

    Most microphone output a low voltage signal that must be put through a preamp.
    The computer needs to have a line voltage signal level instead.
    Allan

  • Why are there itunes store charges on my credit card statement but there are no purchases under my itunes account?

    Why are there itunes store charges on my credit card when there are no purchases under my itunes account?

    Have you added or changed your card details on your account and they are temporary store holding charges ?
    Unknown charges : How iTunes Store charges might look on credit and debit card statements

  • Why did Apple destroy iTunes? Is there another music player for Mac.

    I hate the new iTunes. Useless steps for navigation. They took something simple and complicated. Is there another music player for Mac. Unless I get the old iTunes back I'm done! I would use anything but this ridiculous player. How could they do this? Steve Jobs would never have let this happen.
    Plus it's slow!!! Diffcult to burn CDs then find them. Yikes!!!!

    iTunes works fine for me, and hasn't been "destroyed" by any means. If you can't deal with the new, simpler interface, just go to the View menu and select "Show Sidebar" and "Show Status Bar". iTunes 11 will then look much like the pervious versions did.
    Diffcult to burn CDs then find them.
    Not sure what you mean here. In what way is it difficult to burn a CD, and what do you mean by "then find them"?
    Regards.

  • Why is there no scaling for high resolution monitors in Adobe Bridge CC?

    Why is there no scaling for high resolution monitors in Adobe Bridge CC?
    Photoshop CC, Illustrator CC and Indesign CC have 200% scaling for high resolution monitors in their preferences panel but Bridge CC does not, when will this feature be added to Bridge CC Adobe???

    qsea wrote:
    Why is there no scaling for high resolution monitors in Adobe Bridge CC?
    Photoshop CC, Illustrator CC and Indesign CC have 200% scaling…
    Inconsistency between or among applications in the artificial "suites" should come as no surprise.
    The "suite" concept is a fabrication of Adobe marketing and bean-counting types.  The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
    The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

  • Can conditional formatting refer to the value in another cell

    Is there a way for conditional formatting refer to the value of another cell instead of entering the value in the conditional format box?

    wwjd is right. no way of doing that.
    WWJD, two wuestions:
    1) do you have the new office 2008 for mac beta (is it out?), how close is it to the new features in Office 2007 for windows, if you do?
    2) why do our pictures keep getting cut off after a day of posting. I posted a pic yesterday and its already not showing on the page the next day. Do they not load them after the question is marked as solved?
    thanks,
    Jason

  • Why was there over ten thousand file in my "All My Files" on my new MBP. I'm very new at using ICloud. I don't understand syncing vs time vs time vs syncing! I simply have not idea how to manage my file now.

    Why is there over ten thousand file in my "All My Files" on my new MBP. I'm very new at using ICloud. I don't understand syncing vs time vs time vs syncing! I simply have not idea how to manage my files now. I read short comments & how to's in the support sections, but nothing I've read so far explains"best practices" or turning iCloud off to get a grip on managing files. I have 250gb fast storage on the MBP itself, and 200gb in the ICloud, one would thing that's enough. The files seem too be multiplying like rabbits. IPhoto's Faces has created hundereds of "somethings" not sure what. I am sure I am very frustrated! Please comment with kindness.

    gf raines wrote:
    Yes,I am confused. To say its just another drive is a "buzz statement".
    OK, for example. If I download a document, song, or photo from ICloud, as I understand, it goes to Download in Finder. If I want to move it to a local folder of my choice on the solid state drive in my new MBP, does a copy always stay in ICloud? How do you housekeep? I have always  used to a physical drive. What is different about the mind set.  I used ICloud to store the contents of my old MBP. Once I download all the files I need, should I turn off ICloud and manage the file locally? I don't like the automatic movement of files when I don't understand the locations.
    Nope, you don't understand it.
    If you download a song from the iTunes cloud storage (which is not iCloud) it goes into the iTunes music folder (generally to a subfolder therein)
    If you download a document from the iCloud drive it will go wherever you chose to put it.
    If you download a photo from the iCloud Photo library it will also go wherever you choose to put it.*
    If you move something you have not copied it, if you want to keep a copy on the iCloud drive and in a local folder, you would copy, not move it.
    There is no 'automatic' movement, you decide what to store on the iCloud drive (exactly like any other drive) and what to remove.
    The iCloud drive appears as a folder in Finder, you use it just like any other, copy/paste, save, delete etc.
    You can turn the iCloud drive off whenever you like, download the content to a local drive first.
    * Because the iCloud drive appears as a folder in Finder there is in fact no need to ever download anything to your Mac, everything on the drive is already on your Mac.

  • How to cell register the date/time when you put a value in another cell

    Hello guys!
    How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
    For example, I want to register a cell to read my electricity meter.
    I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
    I hope you understood the question!
    Thank you in advance to those who try to help.

    There is not automatic time stamping of on entry of a time.  One suggestion I've seen has a cell that has the current date and time.  Everytime you cahnge any cell that cell will update.  You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
    Create a new, plain table:
    Now in cell A1 enter the formula "=now()"  short hand for this is:
    A1=now()
    now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
    It should look like this when you have completed this task:
    Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
    Now you can enter a meter reading (I entered "45671").  Now select the CELL that has current date and time from the first table at the very top, and copy:
    Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

  • If i am the only user and owner of my macbook, then why are there 78 users in the directory editor?

    Hi guys just wanted to know little bit about the open directory as my MacBook Pro has been playing up on and off at least a couple of years.  I have been advised by Apple over the phone or as well as over the genius bar in trying to get my mac to behave.  This normally solves whatever problem that has been happening at the time. "Great, job done!"...  Not so much, as another problem eventually shows it's ugly pixelated face again and then we end up going round the Infinite loop ride one more time...  And this ride ain't always free!  I have forked out about £600 on it so far and it wasn't cheap in the beginning!  Anyway I have just got off the ride and before I get punched by a plyst to get back on I would rather learn about the things I don't understand so hopefully I can resolve the matter without hair loss.  So my main question so far is why are there 78 user names (most of which are computer related names, not all) are found in Directory Utility?  I do not play games on my Mac it is mainly used for media such as iPhoto, iTunes, pages, mail and surfing the net.  So which out these 78 users do I select as a server?
    If you have any suggestions or pointers then please post a reply.
    Thanks for reading
    Orion

    So which out these 78 users do I select as a server?
    None. It's normal. Make no modifications.
    It's not clear what trouble you are experiencing, or if anything is wrong at all. If your Mac is not behaving as you expect it should, describe what's wrong in as much detail as possible.
    Include all relevant details regarding your MacBook Pro starting with which one of its three dozen models you have. Posting the results of EtreCheck will help with that. Read about it here.

  • Is there a way to make state transitions/animations of a fl.control states - button for example ?

    Is there a way to make state transitions/animations of a fl.control states - button for example ?
    All I can do now is change the skin design and that's it, I can't animate between states like I can with Flash Builder skins. So is there a way to do that, any technique or I have to create a button component from scratch?
    Thanks!

    simplebuttons have upState etc properties you can use to assign movieclips to the 3 states.  you can use the currentFrame property of movieclps to (appear to) smoothly transition from one state to another.

  • Why is there No visible URL anymore in my firefox browser window?

    Sorry if I am being an idiot but the look of my browser window has changed and there is no longer a visible URL for any website i click on when using google as a search engine.
    This is what used to happen: 1.Open firefox, 2. a google searchbox would appear in middle of window, 3.type something there, search , 4.click on a chosen site...and it's URl would appear in the window at the top of the page. Then if I wanted to share this I could just copy and paste!
    Now, when i do steps 1-4 above i don't get a visible URL at the top of the page. Instead in it's place is a bar with a google symbol to it's left and nothing in it ????
    Why is the URL not visible any more ...is there another way I can find it/see it /display it?
    Thsi is something that has changed only in the past couple of weeks ...and I don't think i have upgraded it recently ...is this why ?
    thanks for your help

    Hi Cor-el
    thanks for your hlelp! i omitted to say that i am a Mac use and so don't have an f10 key ;-( ...and so some of the other instructions don't work either!
    I have tried some of the other suggestions( like looking in customize tool bars) ..and I don't think that something has gone missing. I think firefox may have changed the look of the window?!
    I have attached a screen grab below...to help explain...
    See the long window at the top that has google written on left hand side ?! This is where the url used to be displayed.
    I have discovered that when you are on a page if you click on the icon on the left hand side of the little window/bar...that is to the left of the long one ...and then click more info you can see the page details in a pop up window ( as per the screen grab) . However only the site details can be copied ...and not the individual page URL ...although this appears at the top of the pop up!
    I also noticed I do not have latest version of firefox running ...so will remedy that
    and maybe that will sort it ...what do you think?
    If I do the same thing but use safari as a browser i don't get the same problem ...and the complete URL for the actual page is displayed !
    thanks
    ladylotusflower

Maybe you are looking for