Why is there is no colour difference in FF4 between an active and an non-active tab?

Tabbed browsing is one of the best features of Firefox. In previous versions the active or selected tab is a lighter colour than the non-active tabs, making it easier to navigate between tabs.
In Firefox 4 (Windows) all the tabs are the same colour. Installing the coloured tabs add-on does not help, because it relies on the shading that FF4 provides (or does not provide in this case).

I am using XP and I can see no difference.
I have gone back to FF3.6 because it is easier to see which tab is active and which tab I am about to select when I hover the mouse over it. FF4 is just dead man. :(

Similar Messages

  • Why Are There Two Sets of Current Flash Releases, 10.3.x and 11.2.x?

    Why are there two sets of current Flash releases, 10.3.x and 11.2.x?

    As Pat mentioned, our current policy is to support the last major version of Flash Player with security related fixes.

  • Re: Why are there numbers not showing up on my verizon online call and texts log?

    I am having the same problem with texts not appearing on my online text log and have also noticed a huge increase in data since my two sons have had their iPhone 5s.  I have the iPhone 4.  Two problems here
    iPhone users DO appear.  In the posted questions and response below, you indicate that if we are all using iPhones then we are not using the Verizon network but using data.  HOW DO I STOP THIS DATA USAGE AND RETURN TO USING THE NETWORK?  I can't afford the data charges that I am getting.. HELP!!  and Thank you.
    1.   Re: Why are there numbers not showing up on my verizon online call and texts log?     
              SuzyQ     May 11, 2013 8:03 AM    (in response to aheath17)    
    If you are all using iPhones, then it's likely the texts are going through iMessages and therefore use data.  Since the texts are not using the Verizon network, but the app, they do not show up in the logs.  The app is not specifically blocking the texted numbers from showing up, but the information comes through Verizon as data usage, not numbers texted.   

        Sparkyjames81,
    Lets figure out just where those texts are going! There are many apps that can be downloaded from the Play Store for Android phones that will allow messages to be sent over the internet, and therefore they are not actually text messages and will not show up in our records. Even Facebook has their own messaging app available that does this.
    If you have an iPhone, they come with a service called iMessage that allows for messages to other Apple devices be sent via the internet, and this will also not show up on our records. These are all ways to bypass our actual texting services, and since these messages are not being sent as texts they do not show up on our records.
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

    Hello.....
    I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
    This issue is with only three servers in the environment
    "Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
    The date/time is correct on the server when i checked in the console session of the server
    Can see below messages in event logs
    Event ID 1014:
    "Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
    Event ID 1053:
    The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
    a) Name Resolution failure on the current domain controller.
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Any thoughts ....

    Hi,
    Have you tried to connect these three servers with IP address instead of computer name or DNS name?
    Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
    For more information please refer to following MS articles:
    Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
    Cannot connect via Remote Desktop
    http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
    Lawrence
    TechNet Community Support

  • What is the difference, if any, between Photoshop CS6 and CC?

    What is the difference, if any, between Photoshop CS6 and Photoshop CC?

    Thank you, Garima. This helps!
    Larry
    Date: Thu, 13 Feb 2014 14:14:08 -0800
    From: [email protected]
    To: [email protected]
    Subject: What is the difference, if any, between Photoshop CS6 and CC?
        Re: What is the difference, if any, between Photoshop CS6 and CC?
        created by Garima.J in Photoshop for Beginners - View the full discussion
    Hi LarryMeikle
    The biggest difference between Photoshop CS6 and Photoshop CC is that Photoshop CC is subscription-based--you have to subscribe to Adobe's Creative Cloud service to use it.  Also, Photoshop CC includes new features that were not in Photoshop CS6.
    Let us know if that helps.
    Thanks!
    Garima
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6118812#6118812
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6118812#6118812
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6118812#6118812. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop for Beginners at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • SAP SD--Difference of upgrade between SAP4.7 and ECC6.0

    Hi friends,
    Somebody can pls tell --Difference of upgrade between SAP4.7 and ECC6.0 in terms of sap SD module or any links for this.
    Rahul

    Hi Rahul,
    Your question is a little general...Maybe you could go to sap help portal to search for the documentation for upgrading to 600.
    As I know, we have some new functionality in release 600. For example, shipping point determination with storage location, automaticly outbound delivery creation after saving stock transfer order...
    Also the screen is different for most list transactions like VA05.
    Regards,
    Smile

  • Is there any way I can use continuity between an iDevice and a Lumia? (The iDevice being an iPad or iMac)

    Is there any way I can use continuity between an iDevice and a Lumia? (The iDevice being an iPad or iMac)

    Continuity requires OS X and iOS. At least one of the devices you mention is lacking those... So no.

  • Is there a way to stop sharing apps between my iphone and my daughters ipad. We share the same email and itunes account.

    is there a way to stop sharing apps between my iphone and my daughters ipad...we share the same email and itunes account.

    You can keep the same Apple ID for purchases, but set up her own iCloud account for email and syncing.
    You can easily and effectively use the same ID for purchases.
    What you do is use the apple ID you have been using for app/book/movie/music purchases. In Settings > Store, make sure you are using your usual apple ID.
    Then, set up an icloud (@me.com) account for you on your phone, and one for your daughter on her phone. In Settings > iCloud, make sure each of you are using your new iCloud accounts, and not your Apple ID.
    Also, in Settings > Messages > Receive At, make sure you are using your iCloud accounts
    This way, all of your purchases are using one account, and you can effectively use iCloud.

  • 3.     What is the difference, if any, between a Workset and a Role?

    3.     What is the difference, if any, between a Workset and a Role?

    Hai
    Pls check these links
    http://help.sap.com/saphelp_nw04s/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
    http://www2.sapdesignguild.org/resources/ma_guidelines_3/introduction/what.html
    Reward points if helpful
    Regards
    Nissy

  • Why is there an 'Error: No Data' sign when importing in Log and Transfer?

    Hello,
    I am trying to import clips from my Panasonic HDC-SD100 camcorder into Final Cut Express 4. I am using the Log and Transfer window and am able to import most of my clips. However, every time I import there are a handful of clips that are left idle and an 'Error: No Data' sign appears next to them. They have not been imported to the Scratch Disk, and yet there doesn't seem to be anything wrong with them because they playback on the viewing screen in the Log and Transfer window. Can anyone help me to determine what is wrong?
    Many thanks.

    Some of the descriptions you are using are kind of confusing.
    "first 2 controls of each DO line(s)"
    "button 1 of DO lines 1 and DO lines 2"
    "control 2 of DO lines 1 and DO lines 2"
    What is the difference between "button 1" and "control 2".  I am going to assume you mean the same thing when you say "button" vs. "control" but just decided to change terminology in mid-sentence
    You need to write out a Truth table to describe what you need done.  The way you have the description written, you are already using the word "OR" to describe the different situations.  That is going to be a key part of your program.
    This shows:
    (DOlines button1 AND button2)  OR
    (DOlines2 button1  AND button2) OR
    (DOlines button1 AND DO lines2 button1)  OR
    (DOlines button2 AND DO lines2 button2)
    Attachments:
    002[1]_BD.png ‏11 KB

  • Why are there numbers not showing up on my verizon online call and texts log?

    << Discussion  moved from All Things Community to Apple for better exposure >>
    Why are there numbers not showing up on my call and texts log when i look this up online at verizon? There is one number that my daughter texts and calls a lot i found from her phone log but not one time does it show when i look this up on the Verizon wireless call log???  We all have iphones is there an application or something that can block certain calls from showing up? It clearly has texts on her phone from this number why would it not be on the call log?

    Thank you for your reply.
    However, wouldn't an iMessage show up different than a text? It looks just like every other text on her phone.  We all have iphones in this house and they always show up as texts on  the call log but this one number seems to be blocked somehow from showing up on the text log. And there are texts from weeks ago and it's from an actual number not computer or any weird/odd code and yet it never comes across on the text log when i look it up. 
    If you are correct and it's coming across as iMessage is there a way for me to block texts coming across this way so they all show up on the text log?

  • Strange differences in printing between 1.5 and 1.6

    I've been successfully running for some time now an application which prints CD labels based on information in a database.
    The front label is fairly simple, dividing a square area into four rectangles, the top left and bottom right are squares of different sizes, the top right contains text (artist name(s)) printed horizontally, and the bottom left contains text (album name) printed rotated 90 degrees clockwise, both text fields centred both horizontally and vertically, with respect to the rectangle orientation. The application lays out a print preview panel, and if I'm satisfied with it I invoke a print function, which uses exactly the same code as the preview.
    This has been working fine for a year and a half (for in excess of 600 labels) under Java 1.5. Now, using 1.6, the print preview works OK, after modifying the code for problem#1, but the printed output gets the bottom left area wrong. The reason I found problem#1 was that I test whether there is room for all the text on one line, and if not split it. I do that using FontMetrics.stringWidth(String). Under 1.6, when an affine transform is applied to rotate the rectangle, stringWidth returns a negative number - on 1.5 it was positive.
    After changing the code to take the absolute value of stringWidth, the text in the rotated rectangle is not centered vertically, and seems to be
    possibly centered horizontally, but in a much larger rectangle, so that most of the text is invisible, being outside the visible rectangle.. If I have to split this rectangle it's even worse, the text falling completely outside the rectangle, and the two lines being aligned according to different widths, quite apart from being presented in reverse order.
    If stringWidth is behaving correctly, I'd like to know what the explanation is, and why it behaves differently depending on whether I'm creating a print preview or actually printing.
    As a matter of interest, I just triedchanging the orientation of the bottom left rectangle to rotated 90 degrees anticlockwise - print preview exactly as expected, same displacement on the printer. I'm having to keep a copy of 1.5 just for this application, and having to remember to change my PATH every time I run it.
    A similar application which writes the tray inserts, which produces, for the spines, text rectangles in BOTH rotated orientations, AND 180 degree rotation, works without a problem in 1.6.

    Yes, of course, I'm running on the same system. My testing technique involved parallel tests in two command prompt windows, the only difference between the two being tha PATH environment variable.
    I have resolved the problem by using Math.abs() for all the invocations of stringWidth, getHeight and getDescent for my rotated rectangle.
    I'd still like to know where it is described that the return values for these methods are negative when the rectangles are rotated 90 degrees, and why.
    I have found another resolution to the problem, by doing all stringWidth, getHeight and getDescent processing before rotating. The negative values only seem to occur when rotated �90�.
    Message was edited by:
    digby

  • Differences in NLS_LANGWE8ISO8859 between Oracle 8i and Oracle 9i or higher

    Are there any differences in NLS_LANG WE8ISO8859P1between Oracle 8i and Oracle 9i or higher?
    please, there is a document that explains what.
    thank you very much.

    Ok,      
    I want to know whether there was any difference when using this NLS_LANG between 8 and oracle 9.
    I read many documet about unicode, but i want to know this question.
    If NLS_LANG is a standard there isn´t changes between the to versions.

  • Difference in Amount between BI Report and GL Account

    Hi,
    Regarding the difference between BI report and GL,
    We found duplicated records in the data source 0FI_GL_4.
    (The difference was in an another account which did not match with the GL.)
    1.Account: 123456
      G/L Balance: $430,382.41
      BI Report:     $432,211.10
      Difference:     +$1,828.69
    u21D2In data source, there are a duplicated record for each of two accounting document below.
    Acct doc. 1900000900 item#2    $2,623.64
    Acct doc. 1900000901 item#2      -$794.95
    2.Account: 7891011
      G/L Balance: $92,301.92
      BI Report:     $78,341.42
      Difference:  -$13,960.50
    u21D2On data source, there are a duplicated record for one accounting document below.
    Acct doc. 1900000902 item#2   $13,960.50
    What could be the cause of this? How can I solve this issue?
    Thanks

    Hi,
    Since I already know where and what the duplicate amounts are in the PSA, Can I do the following:
    1. Delete the Amounts (and change them to 0) in the PSA
    2. Delete that particular load from the Cube
    3. Now that the duplicate amounts dont exist in the PSA, Re-Load it back to the Cube using DTP
    Would this work? Is this even possible?
    Thanks

  • Difference of balance between Sub Accounting and General Accounting !?

    Hi,
    i have a difference between the sub and the general accounting, the correct balance is in the general accounting.
    When i show the balance of the sub accounting with the Tcode FK10N i find that the difference comes from the last year, there is a balance of 10.000 Euro that is already cleared but it is still apearing in FK10N and in other Tcodes of sub accounting.
    Please how can i solve that ?
    Regards.

    F.07 is the Balance Carry Forward; it copies the suppliers (and customers) balances from one year to the next one (tables LFC1, LFC3, KNC1, KNC3).
    You should check that the opening balance of one year is the same as the closing balance of previous year. If it is not true, F.07 should repair the data in the tables.

Maybe you are looking for