Why is there no sound coming from my Ipod speaker?

Why is there no sound coming from my ipod speaker?

Do headphones work?
Do you have volume set to max?
You can try the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If you still have the problem then it is likely have a hardware problem and an appointment at the Geniu Bar of an Apple store is in order.

Similar Messages

  • Why is there no sound coming from my mac air book ?

    why is there no sound coming from my mac aribook?

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    14. Make a "Genius" appointment at an Apple Store.

  • TS1425 My iPod Classic was working fine all day.  Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod.  I've used both headphones and a docking station.  The songs don't even begin, they just skip to the next one. 

    My iPod Classic was working fine all day.  Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod.  I've tried both headphones and a docking station......nothing.  The songs don't even engage, they skip to the next one.  I've tried rebooting the iPod and still nothing.  Any ideas?
    Kim

    Hi, and welcome to Apple Discussions.
    Have you tried resetting the PMU?
    I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
    Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
    How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
    All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

  • There is no sound coming from my ipod!!

    Hi, I am using an itouch 2nd gen. and there is no sound coming from it when i attach my ear phones to it. I have reset the settings, restored it, switched it off many times, still nothing. The earphones are working just fine. Some help would be great!! Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod. Not clear if you did that type of restore
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. I would say not worth it for a 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Why isn't sound coming from my ipod nano?

    I recieved a brand new 7th generation ipod nano. no matter what I plug into the device to listen to my music (headphones, earbuds, speakers), there is no sound coming from the device. even when I attempt to use only the built- in speakers, i can hear nothing. video works fine.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • No sound coming from my ipod

    I have a 5th gen. ipod video and it works fine but the only problem is that no sound comes out.....I can't hear anything and it's not my headphones
    Toshiba   Windows XP Pro  

    Hey Dear,
    Have you got the Solution of your problem of Ipod giving no sound. I m having the same problem with my ipod. Everything seems working well in ipod but there is no sound coming out of ipod.
    Please guide me if you have got the solution.
    Best Regards
    Ajay
    [email protected]

  • Why do i not have sound coming from my ipod?

    Problem started after the iPod was left in a hot car. At first it played nothing, then it played a few songs flawlessly and finally the sound has completely vanished. I restored factory settings and have done some of the suggested tips from various sites to no avail. All things appear normal as far as operation is concerned.
    I have all the music that was on it and it shows it as playing. I'm stumped. Any help would be greatly appreciated.

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • There is a very loud, distorted sound coming from my Ipod Nano 7th generation no matter what headphones i use. Any fixes?

    I bought an Ipod Nano 7th generation and out of the box, there was a really loud distorted sound as soon as i pressed play. When i press pause, it stops. If i use a different pair of headphones is does it. So, i exchanged it, and all was good for about three weeks, now even the new one is doing it. The sound is so loud and fuzzy that i cant even hear what the song is supposed to be.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • There is not sound coming from my ipod.

    I have an ipod classic 30G Video. I have tried resetting, restoring, trying different headphones... nothing working so far.

    If a restore to factory settings did not resolve the issue, it's likely hardware related as a restore would eliminate the possibility of a software error or data corruption.  And you have already ruled out a bad set of headphones. You'll need to either take or send your iPod in for repair either via Apple or a third party service.
    B-rock

  • Weird sound coming from my ipod, help

    My ipod has just frozen and it's emiting a high-pitched sound (not throught the ear phones, but directly from the device itself). What do i do? I'm going crazy with this sound.

    Run an Apple Hardware Test to see if it picks up any anomalies.
    I would open the MBP and inspect the internal components with emphasis on the fan, as suggested by dalstott.
    Also make certain that you data is backed up.  Though you HDD is not in the upper left hand corner, I don't discount that as a possibility.
    If your purchase date is less than 12 months ago you are still under warranty.  I would then take to Apple and have them perform diagnostics to determine what the problem may be.
    Ciao.

  • When I plug my headphones into my MacBook Pro, and I turn the volume up, I hear the little bubble sound coming from the computer speaker. What is wrong with my computer? I don't think it's the headphones, because i've already tried two pairs.

    How can this be fixed?

    Hi DS,
    Thanks for the response. Unfortunatly those documents are of no help to me. I have tried several times to boot into the AHT, which didn't work. And attempting to do an internet recovery won't even allow me to log into my wireless network, even though I know the password is correct.Let us try to go through this step by step, as I've been doing.
    1) After resetting the NVRAM it still does not see any new hard drive, and I don't need to select the old HD to boot from it. If it is in it works.
    Therefore this means that it is
         a) not the SATA cable
         b) not the new hard drive because my friend got his replacement HD today and I checked them both out. They both work fine on my other friends new macbook pro.
    2) The old hard drive can boot up regularly, and the new one can be seen via the SATA to usb connector and booted from, but not via the internal SATA connector.
    Also, I still can't boot into Parted Magic, or any other rescue OS I have.
    This seems like a very specific problem, and it definatly wasn't anything I did. I followed troubleshooting steps like I normally do and it wasn't a clusterfuck as you so elequently stated.
    Please take the time to respond to all of my questions this time, I feel like you are overlooking some very important information.
    Thanks,
    RFJ3200

  • Weird sound coming from my ipod

    Hi, Problem 1:My ipod mini makes a grinding noise when connected to my computer.. It only generates this sound while updating.
    Problem 2: I bought an album on Itunes store and when I tried to put it on my ipod it only copies the first three songs..
    Whats wrong???
    // Fredrik
    PC   Windows XP   Ipod mini

    Same thing happened to me. I took the ipod back yesterday to the apple store and I got a new one. However, I'm still having the same problem. I think that something is wrong with the settings or itunes 9 itself. Going to keep checking.

  • I put a case on my iPod touch 5 and now there is no sound coming from the speaker.  The head phones work though.  I called Apple Support and the 2 people I spoke with seemed baffled.  Has this happened to anyone and how do I resolve this?

    I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker.  There is sound when we use the headphones.  Is there a mute function that I may have switched on and if so how do I turn it off?
    It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
    Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device.  Who h has not helped.
    HELP!!!!!!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Every time I scroll, there's a clicking sound coming from the top left corner of my macbook

    Similar to the clicking sound of my hard drive, every time I scroll, or whenever there is any sort of animation on my screen, there's a similar clicking sound coming from the top left corner on my , around the area where the microphone is. I know the hard drive is at the bottom right corner, so is this a graphics card issue or am I overlooking the issue?

    It is better to take the MBP to the Apple store for evaluation.
    They have the diagnostic tools to make sure that there is no problem with the computer.

  • Theres very little sound coming from my speaker and people cant hear me i phone 4

    theres very little sound coming from my speaker when i play music and ringtone it was working fine last night also when its going straight to voicemail when people ring but then coming through as a missed call, then when i recive calls i can hear people bnut they cant hear me is anyone else having this problem with there iphone 4

    Hello adam-hardwick1993,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

Maybe you are looking for

  • STO_Reverse

    Dear Experts, My issue is ,,, My client  done STO process completely ,but in delivery (vl02n) he picked 1st line item partially and the system selected NLN item category Again he picked remaining quantity in next line for same line item and the syste

  • Timed Out using iPad

    When using GoodReader App on the iPAd to access our Mac server from another location I get timed out, any suggestions?

  • Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_

    Hi, Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_EXCEPTION external server. What could be the reason for this? This Function Module will be called within program ZMWXO011. This program will be configured in the output de

  • Can't find External Topics

    I am trying to create a jump to an external topic, and can't find any of the topics after selecting the hlp file. Using RoboHelp for Word version 6 build 099. The Primary Source Layout is Winhelp 2000. I have added the hlp files to the primary layout

  • LR2 and PS Eelements8 show different RGB for the same color - Please, HELP

    LR2, Elements 8, Color Chart 24 (CC24), Please help. I may need to reset LR2 to factory default or to something else. For the following RAW adjustments the tone curve set to Linear, Contrast and Brightness to 0 I have photographed a CC24 in RAW. Open