Why is there only Dyndns and TZO DDNS services?

With all due respect ..but this is the dumbest thing , I've waited so long for the new firmware to be released in hope that my router e1500 could use a free DDNS service but still only DynDns and Tzo which has been acquired by DynDns ..no free DDNS service ..No custom URL ....I'm so disappointed -_-

I recommend that you phone contact your regional Linksys support office and ask for help and information regarding this. Or [email protected]
Let us know how it goes please.

Similar Messages

DDNS Lack of Options. Only DynDNS and TZO (which are now the same thing)

DDNS is an open standard. Why not let us put in any URL for a DDNS server we want? Or at least expand the list of them to the many many other DDNS providers out there.
The buy in/bait and switch is: those two free options went to one free option went to no free options: PAY THE MAN.
That's not right. We shouldn't be forced by your Firmware into a new fee arrangement that we didnt' have up front.
Easy fix in the firmware, if you would...

I noticed that too. I guess most routers these days as well has already been following the same standard, which made me think that this aspect has definitely fallen as a product limitation. Right now, we are only torn of choosing between the providers supported by the routers.
Help, learn and share

Why is there only one automated audio fader at head and none at tail of some audio clips?

When I select "Show audio animation," top left of an audio clip, on some sections I have two knobs... one at the head for fade in, and one at the tail for fade out. Why is there only one on some of the audio clips and not both? I've set up the clips the same, regarding audio animation, and some have faders at head, but not tail. How do I make another fader at the tail of a clip? Or why doesn't it automatically behave like the other audio clips that DO have two faders? I don't know what I'm doing to make them act differently.
Thanks,
Michael

Tom,
Thanks for reply. I'm attaching screen shots. For some reason my pointer didn't show up with a normal screen grab. Don't understand. Anyway, several versions are attached. There isn't one hidden on the right beyond the frame that pops out when I put my pointer there (or any tool). Strange.

Why is there only one Operating Concern defined in GBI?

Hi all,
I have the following question: when looking at the CO structure of the GBI case study, why is there only one, global operating concern defined? According to the definition of an OC, it is the level whereupon profitability analysis is performed. So why is in GBI that has two very distinct business areas not at least two OCs defined (one per business area), if not more (per product)?
As a follow-on, what is then the relation between OC and Controlling Area? I am looking for a plain English explanation that I can also use for teaching purposes.
Thank you in advance for reading!
Regards,
Gerhard

Hi Gerhard,
I hope my reply is not too late.
I agree with you. Profitability analysis is typically done at a detailed level - by market segments, which may be defined by geographical segments, customer groupings, product groupings, salesforce grouping, etc. CO-PA does support profitability analysis at such detailed levels.
After defining an operating concern and activating it, the system generates a series of database tables for the operating concern. I took a screenshot of the (partial) structure of the "master" table for the global GBI operating concern, GL00, from the GBI 2.2 system I am using, below:
As you can see, with such a table structure, CO-PA is capable of capturing profitability information at a very detailed level for reporting and analysis.
You may also notice that operating concern is not a field in the table. The reason is, the entire table (as well as its related tables in the same series) is used only for operating concern GL00. Its name is even hard-coded in the last 4 characters of the names of these tables. When CO-PA reports are executed in SAP ECC, they retrieve data from only one series of tables, i.e., only data of only one operating concern can be reported.
Back to your question: Why is there only one operating concern and not two? The wisdom of defining one global operating concern is that profitability data of both controlling areas (Europe and North America) will be updated into the same series of database tables and reported together. If there had been two separate operating concerns for the two controlling areas, there would have been two series of database tables, making profitability analysis across the two areas difficult, if not impossible.
Let me know if you need further clarifications.

Why are there only 10 options under "Set Metadata Format"?

Why are there only 10 options under "Set Metadata Format"?
These are:
Caption
Title
Filename
Author
Copyright
Comments
Keywords
Date/Time
Aperture
Shutter Speed
Has anyone found a way to to change this?

Hi.
Can you find the "Comments" field into the Metadata? Because I don't find it and when I write something in the box Aperture tells me that the box is "unlink" from the metadata...
How can I add a (free) comment to my photos in a book?
Thank you very much for your reply
Bye

Why cant itunes get it together? Why is there only one frank ocean video when in America there are more???

why cant itunes get it together? Why is there only one frank ocean video when in America there are more???
i have spent all day trying to buy or download kid Cudi's what I Am video but am being blocked every time. Why???

Because the content providers have not released it for your country. I am guessing you are not in the US.
This is nothing to do with Apple.

TS2755 why can i only send and recieve text messages from other iPhones whith my new iPhone 5?

why can i only text between other iPhones whith my new iPhone 5?

Hello i need help! My text are only getting to iphone users and some other people without them but some non iphone users are not getting my text?

Why is there only one phone available? Where can I get it?

I arrived at the main site for Firefox by typing www.getfirefox.com in the address bar of my Firefox browser, because I wanted to see if I have the latest version of Firefox. I saw the message that says, "Congratulations, you have the latest version!" Then I saw there is a Firefox OS, so I clicked on that. I eventually followed the link to get a Firefox OS phone, but to no avail. The eBay listing is expired. Yay!
Finally I got to the page that lists, with pictures, the various Firefox OS phones. Only one says it is available, and when I click on that one, to try to get it, I get to a similar page at eBay, where it says the listing has expired. Wow. This doesn't give me a lot of confidence in the security of Firefox. I wonder why it told me that I have the latest version of the Firefox browser installed, when mine is 31.0 and the latest is 33.0.1, and if there is only one Firefox OS device available, and the link on the Firefox site takes me to an expired eBay listing, I don't think I'll be trying to get a Firefox OS device any time soon.
Does anyone here have any suggestions for me?

Hi Scottelly,
You can update the Firefox browser in your computer by following these steps:
* [[Update Firefox to the latest version]]
Regarding Firefox OS, it's a mobile operating system that is available on phones around the world. Here are all the devices currently available (please keep in mind that some of these devices are only available in some countries):
* [https://www.mozilla.org/en-US/firefox/os/devices/ Firefox OS devices]
There is also the Flame Reference Device available for purchase, which is recommended for developers wishing to create applications or develop for Firefox OS:
* [https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame Firefox OS Flame Reference Device]
If you have issues finding a phone, or with a link pointing to an expired Ebay listing, please let us know so that we can investigate.
I hope you find this information useful. Please let us know if you have any questions.
- Ralph

Why are there different specifications and SKUs on the same model window air conditioner?

Hello, The Best Buy website has a Frigidaire Home Comfort 12,000 BTU Window Air Conditioner - White Model: FFRE1233Q1 SKU: 6060171. In the Specifications next to "Energy Star Certified" it says "No" and doesn't show the EER. The picture of the unit shows an Energy Star emblem in the upper, right of the unit.
The website also has a Frigidaire Home Comfort 12,000 BTU Air Conditioner - White Model: FFRE1233Q1 SKU: 8274079. It also states in the Specifications next to "Energy Star Certified": "No" yet shows the EER as 11.3. The picture of the unit also shows an Energy Star emblem in the upper, right of the unit. Both units are in the section "Best Buy/ Appliances/ Heating, Cooling & Air Quality/ Air Conditioners/ Window Air Conditioners/ Product Info".
The Frigidaire website shows a Frigidaire 12,000 BTU Window-Mounted Room Air Conditioner FFRE1233Q1 and states Energy Star Certified": "Yes" and says the EER is 11.3. The picture they show looks to me like the same picture on both pages I've referenced on the Best Buy website and also shows an Energy Star emblem in the upper, right of the unit.
Can you possibly tell me what the difference is between the 2 units on the Best Buy website and the Model FFRE1233Q1 on the Frigidaire website? Thank you.

Hello agreatcompany,
This is certainly bizarre! To my knowledge, it seems that these are the exact same unit, so there wouldn't be any differences. It is possible we were doing some modifications to the information on this unit, and ended up changing the SKU, causing 2 to exist, which may explain why you were able to see both on BestBuy.com at one point. Presently, it would seem the only SKU available on BestBuy.com would be SKU 8274079.
In regards to the specifications, we receive all of the information from the vendor. With that said, I do see that this model appears to be Energy Star Certified according to Frigidaire's site, yet we do not have it listed as such. Please know that I am bringing this issue to the attention of the appropriate teams to have it reviewed, and any errors corrected.
If I should be provided any alternate information in regards to the two SKUs, please know that I will update you right away! If you should have any questions, please let me know.
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Why is there only read(byte[]) & not read(int[])

I'm trying to read large raw images using the RandomAccessFile. Different images are of different types, some are uInt8, some are int8, some are int16, uInt16, float, etc. The only way I know to read them fast enough is by reading an array of bytes, and then putting the bits together into a new array of the desired type, e.g. shifting and adding to the bytes.
I'm sure there's a clever way to read different types really fast... How?

Well... Is there any possabilities to create a new
int[] array that is "pointing" at the same memory
allocation as the byte[], just as you can do in C or
other languages with pointers?
Nope, Java is type safe.
It would be easy if I could make the compiler
interpret the byte[] as an int[]... Suggestions?
Create a java.io.DataInputStream to read from a java.io.ByteArrayInputStream that reads from your byte[] is one option:ByteArrayInputStream byteStream = ByteArrayInputStream(anArrayOfBytes);
DataInputStream integerStream = new DataInputStream(byteStream);
int firstInt = integerStream.readInt();
...If you need random access to an int array maybe you need to create the array first and the read ints to it...

Why is there no copy and paste in place option in Adobe Captivate?

Although this is a wish list item, I do not understand why the item I am pasting always shifts 10pixels on the x & y scale??

Hi there
From what I'm reading, it would seem that you are making some assumptions about Captivate. I say that because of your statement:
A simple explanation as to why this feature was removed from this Adobe product would be great!
And here's my simple explanation.
Although Adobe is now the owner of Captivate, it wasn't always so. Prior to Adobe, Macromedia owned it. Prior to Macromedia, eHelp corporation owned it and it was known as RoboDemo. And prior to eHelp corporation, Nexus Concepts owned it and it was known as FlashCam.
Adobe took the simplest route possible when they "removed" the feature. The simplest way was never to have ever added the feature in the first place!
Cheers... Rick

Why are there only three adjustment tabs in PSE 12?

Hi.
I just purchased PSE 12 on seeing the georgeous features in Camera Raw 8. Apart from the major pain in getting PSE installed on my machine... I am pretty surprised to see that there are only three adjustment tabs on my Camera Raw dialog and also several tools missing. It is a fresh install on a Windows 8.1 Pro machine, CR just updated to 8.3. I tried it with various DNGs from supported cameras.
Are features like tone curve and the ability to only select certain areas of the pictures not available for PSE customers???
Kind regards,
A. Lange

ThoroSOE wrote:
... Adobe couldn't make this fact visible ANYWHERE in a features list?
Adobe Camera Raw differences between Photoshop and Photoshop Elements web page: http://helpx.adobe.com/x-productkb/multi/camera-raw-differences-photoshop-photoshop.html

Why is there only one kernel by default?

i just noticed this when trying out ubuntu. every time you upgrade or install a new kernel, they create a completely new initrd image, config file, and kernel image, and store them in /boot. so...in the event that a new kernel screws up, you can always roll back to an older kernel.
why doesn't arch do something like this?

Moo-Crumpus wrote:McQueen, I can't follow your arguments. If managing your own system had such a weight, then udev and hotplug, initrd and one kernel for all, hardwaredetection and hwd would break the rule, wouldn't it.
That's untrue. Doing something automatically does not imply that it removes control from a user. If it did, then there would be no rc.d scripts, you would have to put everything in rc.local. Hardware detection is the same - you have the option of not using it.
There is not a single app you can name that does not do something automatically. How would you like it if firefox failed on first start with "no profile directory, please create it first" or if your IDE controller modules failed saying "hey, I found some drives, but you didn't specify names for them when loading me - too bad, failing....".

Why is there only proper support for professional users

1. I have 4 HP printers, 1 wireless and 1 wired at home and 2 wired at my office.
Wheneven I want to switch between my office printers and my home printers I have to reinstall the entire HPL Solution Center to get my wireless printer to work because HP Solution Center only knows USB and wired. {content removed} is this an idea to sell more printers.
I've placed this question on the board several times without any response and now I'm sick of it. (content removed) as a developer myself I know this can't take more than 3 days to rewrite since all components are proprely named. At least I hope your developers are at least that smart.
I'm tired of reinstalling you software every time I switch printers. {content removed}
2. why is commercial support only done by communities and you need to pay to get some real support? is it because you only care about your paycheck {content removed}

Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Why are there iOS Applications AND mobile Applications folders?

I am cleaning up my hard drive for 2013 and have disovered that my iTunes folder is the largest folder. Good for me.
Within my itunes folder are both an iOS Applications folder and a Mobile Applications folder They both have recent Modifed Dates and there is some .ipa overlap in terms of applications and serial numbers, it seems like the older stuff is in the iOS Applications folder. I own both an iPad and iPhone but cannot seem to fathom any consistency as to which apps go where.
Do I need both of these and if not is there an easy way to resolve the "problem"? (Assuming it really is a problem.)

Interesting, I only have the Mobile Applications folder. If there are any applications that appear in the iOS folder but not in the mobile folder, you can move them over to the mobile folder, and then delete the other one.

Why is there only Dyndns and TZO DDNS services?

Similar Messages

Maybe you are looking for