Why is there still no Reports integration with JDev (9.0.3)

see http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/JDEV1/index.html
This doesn't work since the Reports feature disappeared with the 'upgrade' to JDev 9.0.3.
When will this integration be reestablished?
One step forward and three steps backwards doesn't improve productivity or customer satisfaction.

Hi James
You can't integrate Reports with JDev 9.0.3 for time-being. The way an add-in gets installed changed pretty dramatically in JDev 9.0.3. So, you'll need to wait until 9iDS 9.0.4.
You install a iDS version of JDev you will get the Reports JSP wizards, etc.
Thanks
The Oracle Reports Team

Similar Messages

  • SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

    we have SSRS 2012 report integrated with SharePoint 2013  , when we click on any toggle item after some idle time of 60 secs and try again to expand
    another toggle item then  complete report is getting refreshed and  if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
    level.
    what we observed.
    1. there is no problem when we expand toggle items without any idle time.
    2. when we open the report and expand few toggles and keep idle for 60 seconds and try
    again to expand another toggle item then  complete report is getting refreshed (all toggle items are collapsing).
    3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
    items it is not refreshing.
    why it is happening and how to stop that complete refresh.
    Surendra Thota

    Hi Surendra,
    I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
    I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
    Please reference to the setting below to don't limit the timeout values if you got the report reloading:
    Point to a report in the library.
    Click the down arrow, and select Manage processing options.
    In Processing Time-out, select Do not time out report processing or
    Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
    If you got the session timeout that refresh the page, please reference to the setting in below article:
    http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
    Details information in the article below about the timeout setting for your reference:
    Set Processing Options (Reporting Services in SharePoint Integrated Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • As of version 31, why is there still no Thunderbird option to insert current date and time in message that you are writing?

    As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
    Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
    It seems only way is to link a Macro and tool to Thunderbird and do it that way.
    Joe Rotello
    [email protected]
    Skype: joerotello

    Where was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
    I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
    Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
    "For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message"

  • Aperture 3 update.  Why is there still no eraser for the retouch tool?

    Perhaps I'm missing something, but: Why is there still no eraser for the retouch tool?
    I realize you can delete retouch strokes, but they are in linear order so you often have to delete useful ones to go far enough back to get the one that you've decided no longer works.
    I would rather have the ability to erase strokes back to the original image, much like the way the History Brush works in Photoshop, and indeed the eraser tool works in many other Aperture bricks.
    Example, I retouch an eye, and then move on to retouch an ear.  Then I decide I don't like the eye brush strokes.  In order to remove one stroke on the eye retouch, I have to delete all the successful brush strokes I've made to the ear (i.e. those that came after the stroke I wish to remove from the eye).  This is needlessly complicated and inefficient.
    Many of other bricks in Aperture have an eraser tool to selectively remove brushstrokes.  Why not the retouch tool?
    Also, many other bricks in Aperture allow for stacking or layering bricks of the same adjustment with different brush choices.  Why not the retouch tool?
    Am I missing something?

    We are just users here.  Feature Enhancement requests need to be made via Apple's official approved channel.  You can get there from within Aperture by clicking "Aperture➞Provide Aperture Feedback".
    Retouching (and cloning) involves not just applying a transformation to the selected pixels, but basing that transformation on _other, non-contiguous_ pixels sampled from the image.  This leads me to think that there may be intractable technical problems setting up the kind of workflow you propose.

  • Integrating Reports Builder with JDEV

    Hello,
    I am studying how integrating a Report builded using Reports Builder with JDEV, because when I run from JDEV my JSP file which contains Reports, I am not manage get success. However, if my JSP has not Reports, then I get success in the execution. When I am running the JSP with has Reports, in the execution, the following error messages are displayed:
    org.omg.CORBA.OBJ_ADAPTER: org.omg.CORBA.UNKNOWN: Unexpected User Exception: IDL:visigenic.com/Activation/NotRegistered:1.0 minor code: 0 completed: No minor code: 0 completed: No
         at com.inprise.vbroker.poa.BOAImpl.obj_is_ready(BOAImpl.java:374)
         at oracle.reports.server.RWServer.startServer(RWServer.java:558)
         at oracle.reports.server.RWServer.run(RWServer.java:198)
         at java.lang.Thread.run(Thread.java:484)
    Someone, could help me?
    Thanks.
    Carla

    Hello Carla,
    The link indicated by Philipp just move to this URL
    http://otn.oracle.com/products/reports/htdocs/getstart/GettingStarted/index/index.html. (Sorry for that)
    Watch the Reports/JDev integration viewlets in the demonstration section.
    To be able to execute a Reports JSP from JDev you should be in the JDeveloper of the 9iDS. (9i Developer Suite). You can also check you Jdev 'Run' property to check if the Embeded OC4J server starts with all IIOP parameter. (FYI:a Reports JSP communicate with the Reports Server using Corba)
    1. Right click on you project in the system navigator
    2. Choose 'Project Setting'
    3. In the Runner Entry you should have a Java option like :
    -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB
    (This option is automaticaly added if you select New, Reports JSP from JDeveloper)
    Regards
    Tugdual Grall

  • Error while running SSRS 2012 report integrated with SharePoint 2013

    Hi,
    Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
    We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
    The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
    server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
    Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="100000" />
    </appSettings>
    Thanks

    Hi Surendra,
    I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
    I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
    Please reference to the setting below to don't limit the timeout values if you got the report reloading:
    Point to a report in the library.
    Click the down arrow, and select Manage processing options.
    In Processing Time-out, select Do not time out report processing or
    Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
    If you got the session timeout that refresh the page, please reference to the setting in below article:
    http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
    Details information in the article below about the timeout setting for your reference:
    Set Processing Options (Reporting Services in SharePoint Integrated Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • BW Report Integration with NW Enterprise Portal 7.3

    Hi ,
    I have integrated BI with Portal inorder to view the BW reports that was built on BW queries.
    On viewing the report on portal we get to see cross-marks besides every tabs present on the report. Any specific settings needs to be configured for BW side.
    Regards,
    R. Rajesh
    Edited by: Rajesh Rajan on Jan 13, 2012 11:33 AM

    Hi Kumar,
    I see these cross-marks on the report tabs which is shown on portal. Had a thought whether something to do with java plig-in but still no go.
    Steps followed:-
    1. Created a BW report.
    2. Perfomed all the steps needed to integrate with portal.
    My question here is any specific settings from BW side has to be configured generally if integrated with portal?
    Regards,
    R. Rajesh

  • Reports Integration with Jdeveloper

    Reports integration has been in and out of Jdeveloper over the last few versions.
    Is there a posted statement of direction on when and how integration will happen?
    (My hopes are up because the OTN product pages are now talking about Reports 10G)

    Hello Thomas,
    The Reports JDeveloper Extension are currently available only in the Oracle9i Developer Suite (Oracle9iDS) that contains:
    - Reports Builder 9.0.2
    - JDeveloper 9.0.2
    The Reports Extension will be also available with the Oracle Developer Suite 10g.
    Regards
    Tugdual

  • SSRS reports integration with sharepoint 2010

    Hi Friends,
    Any one can u pls tell me what are the  prerequisites for integrating SSRS Reports with Sharepoint.
    This is the first time im going to integrate SSRS reports with Sharepoint. Any one pls help me on this.
    Thanks in advance.
    Regards,
    LuckyAbdul

    Hi LuckyAbdul,
    We can integrate Microsoft SQL Server Reporting Services with SharePoint Foundation 2010 or SharePoint Server 2010 by configuring a report server to run in SharePoint integrated mode. There are some prerequisites for integrating SSRS Reports with SharePoint,
    including Report server requirement, SharePoint Products and Technology requirements and Database server requirements in SQL 2008 R2.
    The Reporting Services Configuration Manager is no longer required or supported to configure and administer Reporting Services SharePoint mode in SQL 2012. Use SharePoint Central Administration to configure a report server in SharePoint mode.
    The configuration steps for this version you need to do in Reporting Services Configuration Manager and In Central Administration, please see the following articles:
    2008 R2:
    http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
    http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
    2012:
    http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why ist there still no 5.0a2 x64 windows version for download?

    Even the 4.0 x64 windews version was imho stable enough for a release. But the x64 version was planned for 5.0.
    But where ist the test version?
    The 6.0 version is not stable enough to use so I'm back on 4.0pre13.

    Alright Firefox Users,
    As I'm typing this to y'all, I'm chatting with a LIVE Mozilla Firefox Support agent online in regards to the x64.
    This particular agent advised as of the Firefox 3.0 edition, the 64bit version was available to be downloaded for use. I have spent the last 1.5hrs trying to get this strighten out as they claim that the 64bits are released but I have proved to him, NO WHERE on this site does it claim there has been a 64bit release.
    I have also sited the two different links [http://techblog.weblineindia.com/news/firefox-5-0-to-have-64-bit-version-for-windows-in-2011 Firefox 5.0 to have 64-bit Version for Windows in 2011] and also [[822874|Why is't there still no 5.0a2 x64 windows version for download?]] where clearly states there is nothing.
    Fortunately for us, Mozilla has decided to make a higher version called Nightly 8.0 which DOES NOT have any of the add-on that you might be looking for, but to be honest, this version of browser is honestly ONE OF THE BEST I've ever used despite the lack of add-on available. I believe this would definitely make your browser perform a bit better, and if you have some patience with Firefox/Nightly, they'll eventually come out with add-on bit by bit.
    In my final saying, I hope you guys encourage the techs you correspond with, have done all their research before you disconnect with them as it could be really difficult to wait for them to come back online from whatever they're doing.
    So before you beg and plea for more x64 stuff, try the [http://nightly.mozilla.org/ Firefox Nightly Builds - These builds are for testing purposes only]

  • Crystal Report Integration with BW 70

    Crytal Integration with SAP BW  
    Posted: Apr 21, 2008 6:53 PM       E-mail this message      Reply 
    Need help.
    I have read some links at SDN, like Getting started link on BO and also http://www.businessobjects.com/product/packages/ to understand do we have to buy any additional licenses to use Crytal reports with my SAP BI 70?
    1) We already own Crystal Enterprise. We are using for Non SAP Data
    2) I remember to see SAP's integration kit in BW 3.5 and toolset to allow creating Crystal Reports on BW Queries. Also remember as SAP Customer we have access to create 10 queries even when we do not have Crystal License. Part of BW 3.5.
    3) Since we have Crystal Enterprise already, do we need to buy additional Licenses for using it for SAP BW?
    My question is limited to Crytal and not Generic BO, because SAP had some content development relationship with Crystal earlier. We have Business content (Brazilian Taxes in Crystal Reports)
    BusinessObjects XI Integration Kit for SAP will certainly will allow it but is it really needed for Crystal Reports?
    Can some one clarify?
    Pankaj Gupta

    Hi
    We recently bought Crystal Reports and also now in the process of connecting it to ECC6.0, CRM and BI 7.0. We do have the SAP integration Kit and from the installation manual I can figure out that the integration kit is a must because of many auth issues etc. They have provided a couple of transport to be imported into each of the systems and many parameter settings.
    If you are not having the Integration Kit it you should be trying to connect through ODBC etc which may be quite difficult with BI.
    Sunder Arunachalam

  • Is there a template for integrating with Twilio?

    Is there a template that can be purchased for easily integrating with Twilio? 

    Unlike wordpress templates, BC templates don't touch the server, there is no serverside code included in a template that could interface with the REST or XML interfaces of Twilio.
    With that said, you can build a middle man server that talks to both BC's API and Twilio's and get it all done. You would have to build it yourself or hire someone to build it for you (raises hand), price would depend on what you wanted to do.

  • I have uninstalled, downloaded latest and installed but it still doesn't work. Why are there still files leftover even after manually removal whatever I could?

    I am a Windows 8.1 user. I have followed instructions found online. But still nothing works.
    McAfee is still saying Firefox is untrusted and will not run it.
    I have managed to delete some folders containing Firefox but there are some still remaining.
    Why?
    There was never a problem before today.

    Hi, [https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer this article] will help you to completely remove Firefox.
    You should ''only'' download Firefox from [https://www.mozilla.org/en-US/ Mozilla.]
    If McAfee is still not allowing it, you may need to look at the settings within McAfee.
    Hope that helps.

  • Why are there still preinstalled MD2 Root Certs from verisign with FF3,4,5 ?

    Hi,
    i added a verisign root certificate in the troubleshooting section.
    This cert is signed with an md2 hashing algorithm, as mentioned on the 26c3 in berlin 2009.
    It's still enabled by default for WEB, Email and other.
    I strongly suggest to remove it, like anyone else did.
    Interesstingly, the cryto shell extention from windows says sha1 , but openssl does not mention sha1 at all. I think openssl is right :)

    Do those certificates have a SHA1 fingerprint?
    I do not think that Firefox will use the MD5 (MD2?) fingerprint if that is the case.

  • Why are there changes in the histogram with a convert to profile?

    When you convert an image to a different profile the color numbers change, in order for the colors to represented the same (as closely as possible given the gamut differences) in the new color space.  The histogram also changes, quite noticeably.  Why?  Is it representing the raw numbers and not their interpretation in the new space?  And if so -- why is that?  Is it of some use?
    Thanks!

    I understand that for an export operation, but still puzzled why the histograms are almost identical in LR for images that had been brought into PS from the same RAW file and converted to different spaces (with slight differences undoubtedly due to the different gamuts).   In that case, LR must be "honoring" the different color spaces, with the same appearance and histograms...  But when I soft-proof the same RAW file I get very different histograms -- the sRGB more stretched out than the ProPhoto one.  Those soft-proof histograms are "the same" (realizing they are all quick calculations) as when I do the corresponding convert to profile in PS.
    Maybe I'm not getting my head around "the histogram of the proof target."  That would be the more "dramatic" (changed) histogram I'm seeing in LR's soft proof and PS's convert to profile.  But is there a reason to show it that way?  Doesn't a histogram need to be interpreted in a color space to be meaningful?
    If I go ahead with something like a Save for Web or Export from LR in that target color space, I'll then see the histogram return to more or less what it was before (given that rendering intent has done its thing).
    Is it that the more dramatic histogram is simply representing the image in the wrong color space??  I can see that as a pragmatic decision.

Maybe you are looking for