Why is this much difference between z2 and z1 of screen time,web browsing, video playback?

i have sony z1 phone...it's very nice but battery is not good. i have 5-5:30 of screen time from 100% down to 3-4%
I heard many people saying that z2 have at least 8 hours and i get this to look :http://www.gsmarena.com/battery-test.php3
I am very disapointed.is there a solution to get more screen time or i will sell this z1? sorry for my bad English

It all depends on what else are you doing with the device during that time.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Difference Between 720p30pn and 720p30p on HVX-200 for Music Video Shoot

I'm shooting a music video on the HVX-200. I'm new to the camera and the manual offers little explanation as to the difference/advantages/disadvantages between 720p30pn and 720p30p recording format. I want to shoot VFR (variable frame rates) and mix it with the footage which I think only works with the 720p30p recording format.
Does anyone know the differences/advantages/disadvantages of 720p30pn and 720p30p?
As I'm going for the "film look" of 24fps, which setting on the camera do I use? I'm assuming that I use the 720p30 recording format setting and not the 720p24 as I'm obviously not outputting to film, but then again, I could be wrong.
I do know when I was testing the P2 workflow that when I was doing the VFR (variable frame rate), it was unplayable even with rendering on FCP 5.1. I'm sure I had some funky disconnect between the recording frame rate and sequence settings on FCP. Does anyone know which recording format works integrating both footage shot at 1x and variable and what is the corresponding sequence setup settings on FCP?
Thanks for the help.

Why not shoot 720/24pNative for the "film look."
With the default frame setting in the video or the film mode?
You will mimic part of the "film look" out of the cam rather than addressing it in post, and you increase the amount of footage that can be recorded to a p2 card by recording only 24 frames rather than an over 60 recording.
Play with the scene files for the look you want to add to the "film look."
Remember that the shallow DOF characteristic of the "film look" can't be readily achieved with a stock HVX200.

Difference between WXGA and WXGA-S screen?

Hi,
when i compare 2 types of X201 i see different screens;
FRU 27R2451 ( Serviceable = No ) WXGA-S
FRU 42T0711 ( Serviceable = Yes ) WXGA
what is the difference between WXGA-S and WXGA? and what does Serviceable=Yes or No?
Regards
+ ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7 Pro x64 - Ubuntu 14.04 LTS 64bit + X200 Ultrabase + ThinkVision L2250p

WXGA = 1280x800
WXGA+ = 1440x900
priority wrote:
and what does Serviceable=Yes or No?
It's about a part being CRU (Customer Replaceable Unit) or not. There is a good definition of it on page 65 of the manual.
An LCD is not CRU, so a customer should not replace it itself otherwise a problem may not be covered by warranty.
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Why such a huge difference between wired and wi fi...

Hi,
I'm on Infinity with a curved Home Hub. I get speeds of 38 down and 8 up from a cabled connection to the hub and speeds of 18 down and 8 up on wi fi.
Why is there such a massive difference in speed between wi fi and wired?
I get the same result with the laptop sat next to the home hub over wi fi so I know it's not because of walls etc...
I've used inSSIDer to check I'm not using the same channel as anyone else.
I'm losing 20 meg thingys somewhere, I want to know whose got them!

Got the same one, yes its built in and as could be swapped with this
Might need a Computer shop or tursty geek to swap it out for you.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

Why there is a difference between Router and PIX ACL

Hi,
I have a very basic question about the differences beween ACL behaviour in PIX and Router.
In Router if we put an extended acl entry and want to remove an mid entry then either we have to clear the entire ACL or remove the entries all the below.
Whereas in case of PIX we can remove any of the entry.
Why this difference is there.
Would appreciate your quick answers.
Thanks
Irshad

The PIX OS is designed such a way. Anyway, even in routers you can remove a mid entry by configuring named access-lists. You need not clear the entire ACL in this case.
ip access-list extended ROUTER-ACL
permit ip host x.x.x.x host y.y.y.y any

HELP! I cannot figure this out, differences between 9i and 10g installation

This is for class, and my instructor who obviously has a bad sense of humor has provided me with the following "good" link to get these answers:
http://www.stanford.edu/dept/itss/docs/oracle/10g/nav/portal_1.htm
Within the comparison document you create, include key differences such as, but not limited to:
Any pre-configuration of the Operating System.
Memory configuration consideration (both physical and logical).
Naming conventions of the Global Database or System Identifier (SID).
Online input screens within the Oracle Installer.
Processes that run during the installation (i.e. port assignments, directories defined, etc.).
Password configurations or assignments.
Web Services created (is there one?).
Any post-configuration of the Operating Ssystem.

The current Oracle installation docs can be found at:
http://docs.oracle.com.
Use Oracle's docs and if you instructor has any questions tell him or her to contact me at the University of Washington.
I spent a lot of time on the Stanford campus ... lots of great resources ... but Oracle docs should be found at ...oracle.com.

Why are there print differences between Reader and Acrobat Pro

I have a PDF file generated by InDesign (CS3). When I print the PDF from Reader (8.1.4) I get lighter text than when the same file is printed by Acrobat Pro (9.1.0). A close examination of the printed letters shows that the text printed from Reader is not solid black, while the text from Pro is solid black.
Is this typical or is there something I need to do to improve the printing from Reader?

I am a CADD Coord. (CADD Mgr)designer) I used to do a lot of design. Just recently we have noticed that anything printed from Adobe, the reader or the full version, is printing so lightly in many cases that it looks like it is missing data. whenever we create teh PDF from Autodesk products or Bluebeam Revue, it is the same. Bluebeam prints perfect. Yet the exact same file printed through Adobe is very, very light. Even printing as image it does this. And it appears at random. Some people print ok, but the exact same printer sent by someone else, using the same method, comes out too light in Adobe.
I have contacted Autodesk and they have punted it back. Anyone have any answers or clues to fix? i send out deliverables for clients all the time and I hate to find out they print and miss something of the design.

Why there is a difference between table and view?

CREATE TABLE SK_ABC (ABC VARCHAR2(10),BBC NUMBER, CCD VARCHAR2(100), DDC DATE);
CREATE OR REPLACE VIEW SK_ABC_V
AS SELECT ABC,BBC,SubStr(CCD,1,40) CCD FROM SK_ABC;after this am seeing CCD length in view as 160 in database. am expecting length as 40 or atleast it should give me 100 as table ccd data length is 100, but it is showing me as 160 is bit surprised...
can any one please explain me?
SELECT table_Name,column_name,data_length,column_id,char_used FROM ALL_TAB_COLS WHERE TABLE_NAME LIKE 'SK%' ORDER BY TABLE_nAME,COLUMN_ID;
TABLE_NAME COLUMN_NAME DATA_LENGTH COLUMN_ID CHAR_USED
SK_ABC         ABC                   10                   1                  B
SK_ABC         BBC                   22                   2
SK_ABC         CCD                  100                  3                  B
SK_ABC         DDC                     7                  4
SK_ABC_V     ABC                    10                  1                   B
SK_ABC_V     BBC                     22                  2
SK_ABC_V     CCD                    160                 3                   B

Hi,
This,
SubStr(CCD,1,40)You are taking 40 characters from CCD. You are probably using a multi byte character set, so the column will be 160 bytes. Your output shows char_used = B, that means length of column is taken in bytes.
Edit: Key word is NLS_LENGTH_SEMANTICS
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10766/tdddg_globalization.htm#TDDDG62910
I think the right thing would be to use char semantics when using multi byte character sets
Regards
Peter
Edited by: Peter on May 10, 2011 3:26 AM

How to tell the difference between ibook and ibook g4 screens?

Hi, I've got a faulty screen on my ibook g4, and have spent the last month or so trying to find a second hand replacement one.
I recently bought a screen on ebay, but when I received it, it only said 'iBook' on the front, not 'iBook G4' as my current one does. I replied to the seller to complain that he sent me a g3 screen, but he insists it's G4.
Before I take it any further, can anyone confirm whether it is possible that this is actually a g4 screen, even though there is no mention of G4 on it?
Here is a picture(http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120281147959&ssPageNam e=STRK:MEWN:IT&ih=002#ebayphotohosting)
Thanks, Nick

As far as I have encountered, the 12" screens are cross compatible between the G3 and G4 iBooks. The LCD screens - not the cable harnesses. You can take the LCD from the G3 screen and replace the one from the G4.
Now, with the 14" iBooks, the high end (1.33 and 1.42 GHz models) G4 iBooks use a screen that is not cross-compatible with earlier G4 or G3 models.
So, while you cannot swap the entire screen assembly between the g3 and G4, the LCD panels are largely swappable. The screen bezel and frame are also swappable.
Mad Dog

What is the difference between PixelPlate and Computer's Screen?

I am confused by the coordinates of Pixelplate, Canvas and VWorld. What's the difference and relation among them? The projection of (0,0,0) to Pixelplate is not (0,0) but (-107,571), why??? How to transform the mouse point on Canvas to VWorld and get the projection of a point in VWorld to Canvas?
I need your help!Thanks!

I want to get projection of points in Virtual world to Canvas, How to do it? help!

Color difference between PNG and JPG in Save For Web

I am working on a website and I while building images for the site I am using a mix of png and jpg images. When I "Save for Web" the same source image creates two different color images when I save them as either png or jpg. How do I make sure the images are saving with identical colors in both png and jpg. Thanks

>My working space is Adobe RGB but I'm not opening the sRGB PNG into Adobe RGB. I am choosing "Leave as is (don't color manage)" this should preserve the PNG's RGB numbers.
are you certain it is not being converted when you open it?
The numbers you quoted are the numbers I get if I open an untagged sRGB image into Adobe RGB (assuming Adobe RGB), and then convert to sRGB.
If I open my sRGB images, either PNG or JPEG, into sRGB, they always match. I've been working on a web site for the past 3 weeks, doing this regularly.
If you are working in Adobe RGB with sRGB images that are not tagged, you add a level of complexity that requires you make the right decision at every step. You need to open them without conversion, then assign sRGB, to keep working.
Or just open the images in Firefox 2, which cannot color manage, and see if the sRGB jpeg and the sRGB PNG match. This is the acid test.

New Quicktime 7.1.6 and Vista = Blue Screen of Death during video playback

I received an alert from Quicktime about a critical upgrade to 7.1.6. I was running version 7.1.5 without problem. So I did a full upgrade of iTunes w/Quicktime from the download site. Now shortly after trying to play videos from my PC I get the BSOD. I can play videos from the iTunes web site but not videos on my PC that I bought from iTunes.

I received an alert from Quicktime about a critical upgrade to 7.1.6. I was running version 7.1.5 without problem. So I did a full upgrade of iTunes w/Quicktime from the download site. Now shortly after trying to play videos from my PC I get the BSOD. I can play videos from the iTunes web site but not videos on my PC that I bought from iTunes.

Differences between MSFC1 and MSFC2 in Catalyst switches

Hi,
Want to know the differences between MSFC1 and MSFC2 in Catalyst switches.

Hi,
There is not much difference between MSFC1 and MSFC2, the main difference is how the MSFCs send the hardware programming to the PFC. The MSFC1 uses MLS to program the hardware by using the first packet of the traffic. While the MSFC2 uses CEF-based MLS to program the PFC so that the supervisor can make the hardware switching of the packet. NOtice the difference if the MSFC1 needs to see the first packet while the MSFC2, in theory will not need to see a first packet as it uses the CEF routing table to program the PFC2. Now, the kicker, if MSFC2 in sup1A , all this CEF-based MLS is not used since it needs PFC2 to be able to do this. Sup1A does not come with PFC2 only Sup2 comes with PFC2. The MSFCs gives the Cat6K a L3 ability and it's important but the switching performance of the switch depends on the PFC.
Here is a link on MSFC2 data sheet:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00800887fd.html
Please rate helpful posts.

Difference between textared and textfield.

hi
please any one can tell me what is difference between textarea and textfield.at what time to take textarea,when to take textfield.

Textareas are generally intended for a single line of input (I use them for 255 or less). Textareas allow you to specify an input block for inputting text by setting the columns and rows of the area, and is generally used for much larger data fields.
Hope this is what you are looking for.
-- Cliff

Difference between BSID and GLT0

Hi,
there is a difference btw.:
1) sum of all open item with bsid-hkont = 123 in table BSID
and
2) balance of G/L account 123 (with tcode FS10N)
result of report RFDSLD00 = 1)
Why there is a difference between 1) and 2) ?
regards Andreas

Hi Andreas,
The issue seems to be very much caused because of change of reconciliation account for the vendors involved. I would suggest that you check if the reconciliation account for vendors have been changed. You can do so using the mass change report RFKABL00.
If it is not caused by that, then we have to look at a different reason.
Regards,
Shrikant
Financials - Inconsistencies

Why is this much difference between z2 and z1 of screen time,web browsing, video playback?

Similar Messages

Maybe you are looking for