Why is this new update taking sooooo long?

why is iPhone 4s update taking so long?

MKRR wrote:
why is iPhone 4s update taking so long?
  Because all those people who said "I'll cleverly wait until the day after the initial release to download" are all piling on today.
Seriously, the server loads will likely taper off by the weekend, if you want to wait.

Similar Messages

  • HT2404 why is os X update taking so long I tried to download it and would not finish.

    why is os X update taking so long I tried to download it and would not finish downloading..

    It's been a few days since the original post.  If you use Software Update again now, do you still have this problem?
    Also, what is the name and version number of the update?  If you can't get Software Update to do it for some reason, you can search for that update on Apple Support, then download and install it manually.
    Before you do that, run Disk Utility (which is on Applications/Utilities).  Select "Macintosh HD" in the sidebar and go to the First Aid tab.  Click Verify Disk.  This will check to make sure there is nothing is wrong with your startup disk.  If there is a problem reported, that may be causing the problem with Software Update.

  • Why Is Lion Recovery Update Taking So Long?

    I got the update around 10:15 NYC time, I started it at that time.  It is now 11:50pm, and only 88MB of 888 MB have been downloaded.  Why is this taking so long??? My MacBook Pro is completely up to date (10.7.1) and I have very fast internet service.  This should zip along.  It's not.  At this rate, won't be done till the morning. Any ideas?
    Thanks

    Ah so.....just like the trouble I had with iOS 5 earlier.  Thanks

  • Why is this video render taking a long time?

    OS X Mavericks, Photoshop cc 2014, 2011 core i7 3.4 imac with 32GB ram, 256GB ssd scratch disk, 2GB video card.
    See images for layers setup, etc., and for export settings. Each 'slide' is a jpeg under a MB placed as smart object. Each lower third is about 2 MB placed as smart object.
    Render takes about 24 hours to complete. Why is this taking so long? I've tried this on other machines but they all take about the same time. Is there a better way to do this? Thanks, in advance, for your help!

    How long are the video clips and I see on at least one you have added a camera raw smart filter.   I do not know how a smart filter operates on a video clip. However if Photoshop need to renter a full frame for each video frame and filter each frame image with ACR then  encode the frames into a mp4 video stream it could be a very time consuming process  for nearly 170 thousand frames.  Have you tried encoding the mp4 without using the ACR smart filter adjustment? You also do not show the Timeline palette.

  • Why is downloading new storage taking so long

    I brought som more storage for Iclou ,why is it taking so long for my storage to download ?

    It includes this with the available iCloud storage options on the iPhone.
    10GB - $20/year - 15 GB total iCloud storage.
    20GB - $40/year - 25 GB total iCloud storage.
    50GB - $100/year - 55 GB total iCloud storage.
    Not sure how someone can equate "total iCloud storage" to increasing the iPhone's storage capacity, but the following is included - contact Apple for a full refund within 15 days of an upgrade or within 45 days after a yearly payment. Partial refunds are available where required by law.

  • Why is the icloud update taking so long on IOS 7 ?

    i am updating IOS 7 and it have been an hour that " updaying icloud settings" has been loading on my phone. should it be taking this long or is my phone messed up ?

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Do a clean (re-)install instead:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Why is the software update taking so long?

    The pop-up box, "Software Update; Downloading Firefox; Connecting to the update server...", has appeared for the past three days, at different times. There is a progress bar within it that is scrolling, repeatedly, not ending.
    This pop-up box only has a "Hide" button.
    How long must this pop-up box be active?
    Once prior today I did click the "Hide" button, but the pop-up box reappeared. Please give me some feed back.

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Do a clean (re-)install instead:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Why are my new pages taking so long to open in new tab.

    When I try to open a new address in a new tab it takes 20-30 seconds (or more) to load and open.
    Windows 7 premium. Firefox Mozilla (most recent,18).

    Please make sure you have version 18.0.2 and that you have tried clearing cache and cookies.
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Why this Query is taking much longer time than expected?

    Hi,
    I need experts support on the below mentioned issue:
    Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time.  Below, please find the DDL & DML:
    DDL
    BHDCollections
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[BHDCollections](
     [BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
     [GroupMemberid] [int] NOT NULL,
     [BHDDate] [datetime] NOT NULL,
     [BHDShift] [varchar](10) NULL,
     [SlipValue] [decimal](18, 3) NOT NULL,
     [ProcessedValue] [decimal](18, 3) NOT NULL,
     [BHDRemarks] [varchar](500) NULL,
     [Createdby] [varchar](50) NULL,
     [Createdon] [datetime] NULL,
     CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
     [BHDCollectionid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    BHDCollectionsDet
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[BHDCollectionsDet](
     [CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
     [BHDCollectionid] [bigint] NOT NULL,
     [Currencyid] [int] NOT NULL,
     [Denomination] [decimal](18, 3) NOT NULL,
     [Quantity] [int] NOT NULL,
     CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
     [CollectionDetailid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    Banks
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[Banks](
     [Bankid] [int] IDENTITY(1,1) NOT NULL,
     [Bankname] [varchar](50) NOT NULL,
     [Bankabbr] [varchar](50) NULL,
     [BankContact] [varchar](50) NULL,
     [BankTel] [varchar](25) NULL,
     [BankFax] [varchar](25) NULL,
     [BankEmail] [varchar](50) NULL,
     [BankActive] [bit] NULL,
     [Createdby] [varchar](50) NULL,
     [Createdon] [datetime] NULL,
     CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
     [Bankid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    Groupmembers
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[GroupMembers](
     [GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
     [Groupid] [int] NOT NULL,
     [BAID] [int] NOT NULL,
     [Createdby] [varchar](50) NULL,
     [Createdon] [datetime] NULL,
     CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
     [GroupMemberid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    GO
    ALTER TABLE [dbo].[GroupMembers]  WITH CHECK ADD  CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
    REFERENCES [dbo].[BankAccounts] ([BAID])
    GO
    ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
    GO
    ALTER TABLE [dbo].[GroupMembers]  WITH CHECK ADD  CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
    REFERENCES [dbo].[Groups] ([Groupid])
    GO
    ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
    BankAccounts
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[BankAccounts](
     [BAID] [int] IDENTITY(1,1) NOT NULL,
     [CustomerID] [int] NOT NULL,
     [Locationid] [varchar](25) NOT NULL,
     [Bankid] [int] NOT NULL,
     [BankAccountNo] [varchar](50) NOT NULL,
     CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
     [BAID] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    GO
    ALTER TABLE [dbo].[BankAccounts]  WITH CHECK ADD  CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
    REFERENCES [dbo].[Banks] ([Bankid])
    GO
    ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
    GO
    ALTER TABLE [dbo].[BankAccounts]  WITH CHECK ADD  CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
    REFERENCES [dbo].[Locations] ([Locationid])
    GO
    ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
    Currency
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[Currency](
     [Currencyid] [int] IDENTITY(1,1) NOT NULL,
     [CurrencyISOCode] [varchar](20) NOT NULL,
     [CurrencyCountry] [varchar](50) NULL,
     [Currency] [varchar](50) NULL,
     CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
     [Currencyid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    CurrencyDetails
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    SET ANSI_PADDING ON
    GO
    CREATE TABLE [dbo].[CurrencyDetails](
     [CurDenid] [int] IDENTITY(1,1) NOT NULL,
     [Currencyid] [int] NOT NULL,
     [Denomination] [decimal](15, 3) NOT NULL,
     [DenominationType] [varchar](25) NOT NULL,
     CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
     [CurDenid] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY]
    GO
    SET ANSI_PADDING OFF
    QUERY
    WITH TEMP_TABLE AS
    SELECT     0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                          (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
    FROM         BHDCollections INNER JOIN
                          BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                          GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                          BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                          Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                          CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                          Banks ON BankAccounts.Bankid = Banks.Bankid
    GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                          CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
    HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
                          (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
    UNION ALL
    SELECT     BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                          (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
    FROM         BHDCollections INNER JOIN
                          BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                          GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                          BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                          Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                          CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                          Banks ON BankAccounts.Bankid = Banks.Bankid
    GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                          CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
    HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
                          (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
    TEMP_TABLE2 AS
    SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS  FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
    SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
    HAVING COUNT(DSLIPS)<>0;

    Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
    Just
    SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS  FROM
    #tmp Group By CollectionDate,DSLIPS,Bankname
    HAVING COUNT(DSLIPS)<>0;
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Why did the new update for my macbook air hinder my ability to use my camera for google  and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google  or facetime can find a camera on from my mac?

    Why did the new update for my macbook air hinder my ability to use my camera for google  and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google  or skype can find a camera on from my mac? what do I do??

    An update for same is coming.
    Theres a patch for same, see here:
    https://discussions.apple.com/thread/5306216?tstart=30

  • N8 - How to delete this New Update (microsoft appl...

    I got this new updater for N8 Belle about Microsoft file, it consume 40MB of C: i was just curious that's why i tried to install it but it was useless for me,worst it did install itself in C. how can i delete this? its not listed in  the "already installed" on settings.

    Hi clinxr,
    I assume you have actually installed Microsoft Apps..
    In order to remove Microsoft Apps, you need to follow the same steps as you would removing most of applications.
    From the main menu: Settings > Installations > Already installed > Microsoft Apps (long tap) > Remove
    Please note that the installation of Microsoft Apps would have updated some core components, and as such those cannot be removed. You might therefore notice the amount of free space on the C: drive is not the same as what you started.
    If you want to start from scratch you can either flash your device, or reset it to factory settings which would put your device into shipping conditions. Before doing down this road, I would suggest you back up all your data that you want to keep with Nokia Suite, such as contacts, messages, pictures etc..
    Thanks, Craig

  • HT4623 Do i need to update this new update to my IPhone 3GS?

    Do i need this new update to my IPHONE 3GS? as not enough space - iv deleted all the stuff i no longer need but still short.

    Well, you don't absolutely have to have it ... but ...
    First of all, here's what you would be missing (I assume you're talking about upgrading from iOS 5.1.1 to iOS 6):
    http://support.apple.com/kb/HT5457
    Secondly, as additional upgrades become available, you'll fall farther and farther behind.
    Thirdly, as apps are updated, you may lose out on the ability to run them, and you will lose out on added features.
    So, it's not mandatory that you upgrade, but I strongly suggest striving to do so.

  • This new update for the iphone has me troubled. Nowhere did I see where it was only good for 3GS,4S and or 5. Is this update also good for the 3GS? I'm reading people are haing trouble.

    This new update for the iPhone has me troubled. Nowhere did I see where it was only good for 3GS,4S and or 5 or all. Is this update also good for the 3GS? I'm reading people are having trouble.

    iOS 6 can be loaded without problem on the 3GS.  Not all features are supported however.
    With respect to your reading people are having trouble, what did you expect to see on this technical support forum?  People don't write in to state they have a trouble-free upgrade.

  • Why is my macbook air taking so long to boot up

    Why is my macbook air taking so long to boot up?
    I have added an Airporter and the boot up time remains slow.
    Model Name: M
      Model Identifier: MacBookAir4,2
      Processor Name: Intel Core i5
      Processor Speed: 1.7 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 4 GB
      Boot ROM Version: MBA41.0077.B11
      SMC Version (system): 1.73f66

    Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
    1. Set the default startup disk.
    2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
    3. Reset the System Management Controller.
    4. Reset the PRAM.
    5. Reset the printing system.

  • HT6058 Will this new update slow down my iphone 4 even more than the last update?

    Will this new update slow down my iphone 4 even more than the last update?

    Thats a hard question to answer.  The iPhone 4 has older technology than newer models which can cause the device to lag.  Depending on what data and settings you have on the device, it could run slower.  I would probably make sure to constantly close apps in multitasking and possible think about restoring the device as a new device.  Make sure to backup your data prior to the restore

Maybe you are looking for

  • Issues with Synchronize to and from DB (version 3.3.0.747)

    Having an issue with syncing the model and the data dictionary is a very specific case: 1. Reverse engineer an existing table (T1) 2. Copy the table (in data modeler) - T2 3. Rename the table, make changes (add columns and keys) 4. Forward engineer t

  • Re: DVI or HDMI out laptop?

    hi- I'm looking at the Satellite Pro S300-EZ1513 (with teh XP Pro downgrade) on the ToshiDirect site and wondering i: a)  it has an optical drive (no mention, but seems kind of odd for it nto to) b)   has VGA out, but no mention of DVI? if this only

  • Rename a DataStore in BO Data Integrator

    Hello: We're using BO Data Integrator 3.0 Professional and we need to rename a DataStore, (used by several Data Flows). Is it possible to rename it? How? Thanks in advance for your help and regards, Joaquin Castellano

  • How can I install Imac OS from window 7?

    When I install window 7 from IMAc Lion system, IMac becomes to window 7 system. How can I bring it to IMac system?

  • Unable to Merge Objects at WebI query screen

    Hi gurus, I have an issue in displaying one prompt text at WebI runtime. Sources are BEx query with having prompt 0calday Unx having mm.yyyy format prompt object The features of the Variables BEx: Multiple/Single Value         Mandatory Unx: Allow Mu