Why is this reconcilliation difference: Caused by Time characterisics
Hi,
for an environment with:
Char1 KeyFig1
A----
200
B----
300
C----
400
If time periods on the report are:
i) MTD(3/1/06)
ii) MTD(3/2/06)
iii) Yesterday(3/2/06)
We expected that on the report, the column
A)which is ii)-i) should be equal to column B)
B) which is iii)
What could be the reasons why the key figure for the time periods shown above will be different. We expected that the Yesterday values should have been the difference between the cummulative value MTD(3/2/06) and MTD(3/1/06).
Thanks
...
Similar Messages
-
I keep getting this message “Unable to complete back up an error has occurred while creating back up folder” Why is this happening and is it time to purchase a new tim machine?
Check out the Apple Support Communities Time Machine expert Pondini's troubleshooting article on this exact topic. Hopefully, it will help.
-
iOS: Updating your carrier settings why is this asking to do first time since my old 3gs now its asking on my 5
Sometimes your carrier may release important updates that the phone needs to work with them, maybe something is missing, its hard to tell, try these steps.
Make sure your device is connected to the Internet.
Tap Settings > General > About. If an update is available, a prompt will appear.
Let me know -
Why does this spam site load every time I open a new tab?
Every time I open a new tab in Firefox, it loads this specific search engine. This has never been my Home Page, and my preferences are set to show a blank page when I open a new window or tab.
Why is this happening? What can I do to fix this?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
i have sony z1 phone...it's very nice but battery is not good. i have 5-5:30 of screen time from 100% down to 3-4%
I heard many people saying that z2 have at least 8 hours and i get this to look :http://www.gsmarena.com/battery-test.php3
I am very disapointed.is there a solution to get more screen time or i will sell this z1? sorry for my bad EnglishIt all depends on what else are you doing with the device during that time.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)
Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
after firefox updated from 27 to 28, when i download a file, play music, watch a video, or run a speed test, normal speed is about 160 kb/s (dsl connection 1.3 Mb/s) - just opening another blank tab (not any address) or try to open another page like google search page, download speed drops to less than 5 kb/s - downloading stops, and second page does not open, why is this happening, it does not happen with internet explorer and the version of IE i have is out of date,
history/cookies all clear automatically when close, i have disabled all add on, run malware, adware searches - show no problem, norton antivirus is up to date, i have spent hours on phone with ATT isp and connection is showing no problem - if i run a speed test it shows good, if i try to run a speed test and open second tab - speed fails and speed test will not even finish, ATT suggested I try the same thing in IE and there is no problem - so it appears to be an issue with Firefox 28What is the CPU load when this slowdown happens?
Are you using a specific driver in Windows to mange the internet connection that might not get enough processor time to run properly?
It is also possible that other (security) isn't able to do its work and takes additional CPU time.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
You can try to create a new profile as a test to check if your current profile is causing the problem if starting Firefox in Safe Mode didn't help.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
i have installed snow leopard 10.6.3 on to my macbook which was currently 10.4.11, i wanted to do this so i can run Final Cut Pro 10 which needs 10.6.8 or higher. so i updated the snow leopard to 10.6.8 installed final cut pro ok. the problem i got is else where i cant save on put anything on desktop, it says i dont have permisson, and when i try and click on my documents same again. also i adjusted my dock to smaller added a few applications onto it, but every time i restart the laptop it defaults back why is this?!! so annoying. i had a look at my disk utilites and i have still got 10.4.11 on my Macintosh i can switch too? i installed the snow leopard 10.6.3 on my Data Disk. can anyone help me out why i am getting these problems and what i need to do to solve it?
disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)
See here > http://support.apple.com/kb/HT1527
From Here > http://support.apple.com/kb/TS1368
More info here > http://www.apple.com/support/itunes/downloading/ -
after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steveSee this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it. -
my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?
What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid. -
I Put my iPod in my locker before lucnh and it was off, i went to go and turn it back on for math class and it wouldn't...... i plugged it into my computer and it says iPod is in recovery mode...... and it sujested that i update, and restore so i though okay.... it did the update but everything the restored comes it starts and stops and says "The iPod could not be restored. an unknown error occured (28). why does this keep happening?? please tell me i don't know what to do.......
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
http://support.apple.com/kb/TS3694#error28 -
Why is this video render taking a long time?
OS X Mavericks, Photoshop cc 2014, 2011 core i7 3.4 imac with 32GB ram, 256GB ssd scratch disk, 2GB video card.
See images for layers setup, etc., and for export settings. Each 'slide' is a jpeg under a MB placed as smart object. Each lower third is about 2 MB placed as smart object.
Render takes about 24 hours to complete. Why is this taking so long? I've tried this on other machines but they all take about the same time. Is there a better way to do this? Thanks, in advance, for your help!How long are the video clips and I see on at least one you have added a camera raw smart filter. I do not know how a smart filter operates on a video clip. However if Photoshop need to renter a full frame for each video frame and filter each frame image with ACR then encode the frames into a mp4 video stream it could be a very time consuming process for nearly 170 thousand frames. Have you tried encoding the mp4 without using the ACR smart filter adjustment? You also do not show the Timeline palette.
-
Only some of the photos I have taken on my iPhone appear in the photo stream on my iPad even thou they were taken at the same time. Why is this and how can I import the other photos from my iPhone to my iPad?
If older photos are missing it may be because photo stream photos are only held in iCloud for 30 days. After that they are removed from iCloud but will remain (up to 1000 photos) on your device until deleted. Also, only photos taken after enabling photo stream are added to your photo stream, and only when the camera is closed, your device is connected to wifi and you have at least 20% battery life remaining.
To transfer the missing photos you can either create a shared photo stream containing them and invite yourself to it (see http://help.apple.com/icloud/#mmc0cd7e99), import the photos to your computer and sync them to your iPad, or use an app like PhotoSync to transfer them to your iPad over wifi. -
I used the computer this morning to check email. Shut it down and powered back up this afternoon and a box appeared telling me the date and time were set for before 2008 (actually for 12/31/2000) and needed to be reset. Why would this happen?
No, it had 3:30 hours left. I make it a point of not letting it drain. I haven't had a problem since then, so I'm hoping all is ok. Thanks
Maybe you are looking for
-
Issue in Invoking Enterprise WSDL from BPEL Process
Hi, I am trying to an enterprise WSDL from BPEL. And its giving same error every time. "Unable to access the following endpoint(s): https://test.salesforce.com/services..........." While I am able to call the methods inside WSDL from soapUI. I know t
-
How do I get my signature to appear in my emails?
My signature is not comming up, even though the box is ticked. I have two mailboxes and need the same signature on both
-
I cannot see the yellow motion path in the composition window
Yesterday the motion path was visible after unchecking and rechecking the motion path box in view options. But today it's not visible after trying several times the same thing. I'm trying to animate text using a path animation preset. I'm using an Im
-
Language settings with problems...
Hi form Switzerland My new iPhone 3G S was activated by a italien speaking reseller... I speak german... so I changed all language settings to german... everything looks fine, only the menu-bar of the apple-store (down in the page) still is in italie
-
Using Spring JMS DefaultMessageListenerContainer within Oracle CEP
Hi everyone, I need to use a DefaultMessageListenerContainer Spring bean (from spring-jms.jar), have the wlevs bean factory to assemble it (it depends from a POJO) and set it as a property of an Adapter bean. How do I do it? I tried to put the spring