Why is Transform Tool "reverse position" not working??

Hi.. I have a part that I want to reverse the pitches of so that I can record it as audio and then reverse it so that it is a reversed version of the sound, yet it's playing the right pitches at the proper time...
I was under the impression that the transform tool could do this, however it is not working for me. Could some please enlighten me to my error?
Here is a video of my efforts:
http://collinatorstudios.com/video/transform.mov
-patrick

Nevermind.. I found this thread, where someone already brought this up.
http://discussions.apple.com/thread.jspa?messageID=762890
Someone said:
"Position
Time position of the event, referenced to the start of the MIDI Region (not of the song)."
as silly as that is (if it's true), it still doesn't work when I set it to "all"... It only works if I drag the part to the beginning of the song...
Apple should really hire me to help them fix this program.. (sigh).
-p

Similar Messages

  • Transform/Reverse Position not working

    Hi all,
    In the past I have used Transform/Reverse Position in the piano scroll's (formally called matrix edit) function window to successfully reverse the position of selected notes.
    But I cant get it to work properly at all now.
    I have tried every combination I could think of with the bizarre interface window, but I either get no effect whatsoever, or the data is reversed but appears several bars later than the original position...
    I checked out a lot of the other Transform functions and they all seem to be working as advertised.
    Can anyone tell me what I am doing wrong here?
    Thanks

    It doesn't work properly. It hasn't for ages. If I remember correctly, it only works close to 1 1 1 1, but if you're region is farther away from that, the reverse position transform command just doesn't work.

  • Spry tool tip does not work in template or child pages within an editable region. Why not?

    Ok. so I am getting pretty frustrated. I take the time to learn how to use CSS and to create a template page for a Contractor Site (www.ContractorInsurance.net). The idea is to create a page that I can use for different classes of Contractors...right?
    Then I get all happy about being able to insert ToolTip onto pages to help the user. Great!
    LIfe to turn to Sorrow after nearly five hours of searching for a "eeking" answer.
    So what good does it do to have an Editable region to update if we cannot have the flexibility to insert a tool tip on child pages?  Ok so the fast solution is to what... Have a question mark image, insert another apDiv, name it toolTip_Not and provide it with a show=hide behavior?
    RRRRRrrr...
    This really sucks not being able to find a solution within a reasonable amount of time.

    I have tried thank you. However...it is still not working.
    www.ContractorInsurance.net/course_of_construction.php
    The error message is "Making this change would require code that is locked by a template translator"
        Re: Spry tool tip does not work in template or child pages within an editable region. Why not?
        created by altruistic gramps in Spry Framework for Ajax - View the full discussion
    If you have a look at the following simple document with a tooltipTooltip trigger goes here.
    Tooltip content goes here.
    you will notice that a couple of lines have been placed in the HEAD section of the document. When using DW templates, the HEAD section is usually not editable, hence the error mesaage. By default, your template should have an editable region in it just before the closing tag. It looks like this: <!-- TemplateBeginEditable name="head" > <! TemplateEndEditable --> Dreamweaver should be able to find that editable region and insert the
    <script> tag there automatically. Because you don't have an editable region like that in the <head>, open the master template, and paste the code above just before the closing </head>
    tag. Gramps
    Edited to remove personal data

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • Illustrator tools dropdown is not working after the recent software update

    My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

    Same problem here.  I have a Mac with a recent Yosemite update.

  • Why is my apple ID password not working on ipad2 after updating to iOS6?

    Why is my apple ID password not working after upgrading to iOS6?

    Who knows?
    Settings>iTunes and App Stores>Tap your ID and sign out. Reboot your iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Go back to the settings and sign back in again and see of it works now.
    If it doesn't work, post back with some information that might help us help you. Describe what you are doing in some detail and it might let us better understand why this is happening.

  • ALV GRID Tool bar options not working

    Hello Experts,
    I copied the standard tool bar into my program with the name 'ZSALV_STANDARD' and displaying the output in the grid format in a container with the method set_table_for_first_display
    When I execute the program the standard buttong in the tool bar are not working... Can anyone guide where am I going wrong...
    Here is my code
    DATA :    gr_event_handler TYPE REF TO lcl_event_handler .
      DATA:  threed TYPE i VALUE 1.
      SET PF-STATUS  'ZSALV_STANDARD'.
    * Creating an instance for the event handler
      CREATE OBJECT gr_event_handler .
      TRY.
          CREATE DATA i_table TYPE TABLE OF (viewname).
          ASSIGN i_table->* TO <i_itab>.
          CREATE DATA wa_all LIKE LINE OF <i_itab>.
          ASSIGN wa_all->* TO <wa_tab>.
    *     Selecting data dynamically
          SELECT * FROM (viewname) INTO TABLE <i_itab>.
    *     Building the fieldcatelog
          CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
            EXPORTING
              i_structure_name       = viewname
            CHANGING
              ct_fieldcat            = li_fieldcat
            EXCEPTIONS
              inconsistent_interface = 1
              program_error          = 2
              OTHERS                 = 3.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    *     Making fields editable except key fields
          IF sy-ucomm = 'UPD' OR  sy-ucomm = 'CHANGE'.
            LOOP AT li_fieldcat INTO lwa_fieldcat.
              IF lwa_fieldcat-key = space.
                lwa_fieldcat-edit = 'X'.
                MODIFY li_fieldcat FROM lwa_fieldcat.
              ENDIF.
            ENDLOOP.
          ENDIF.
    *     Making fields editable
          IF sy-ucomm = 'NEW'.
            LOOP AT li_fieldcat INTO lwa_fieldcat.
              lwa_fieldcat-edit = 'X'.
              MODIFY li_fieldcat FROM lwa_fieldcat.
            ENDLOOP.
            lh_flag = 'X'.
            CLEAR : <i_itab>.
            DO 100 TIMES.
              APPEND <wa_tab> TO <i_itab>.
            ENDDO.
          ENDIF.
    *     Exclude buttons
          PERFORM exclude_tb_functions CHANGING i_exclude.
          IF g_custom_container IS INITIAL.
            CREATE OBJECT g_custom_container
              EXPORTING
                container_name = g_container.
            CREATE OBJECT grid1
              EXPORTING
                i_parent = g_custom_container.
          ENDIF.
    *     Making all fields non-editable if display mode
          IF sy-ucomm = 'SHOW'.
            LOOP AT li_fieldcat INTO lwa_fieldcat.
              lwa_fieldcat-edit = ' '.
              MODIFY li_fieldcat FROM lwa_fieldcat.
            ENDLOOP.
          ENDIF.
          IF sy-ucomm = 'SAVE'.
            LOOP AT li_fieldcat INTO lwa_fieldcat.
              IF lwa_fieldcat-key NE space.
                lwa_fieldcat-edit = space.
                MODIFY li_fieldcat FROM lwa_fieldcat.
              ENDIF.
            ENDLOOP.
          ENDIF.
    *     Displaying ALV Grid
          i_layout-NO_TOOLBAR = 'X'.
          i_layout-edit = 'X'.
          CALL METHOD grid1->set_table_for_first_display
            EXPORTING
              i_structure_name              = viewname
              it_toolbar_excluding          = i_exclude
              i_default                     = 'X'
              is_layout                     = i_layout
            CHANGING
              it_outtab                     = <i_itab>
              it_fieldcatalog               = li_fieldcat
            EXCEPTIONS
              invalid_parameter_combination = 1
              program_error                 = 2
              too_many_lines                = 3.
          IF sy-subrc NE 0.
            EXIT.
          ENDIF.
    *      Getting the changed data
          SET HANDLER gr_event_handler->handle_data_changed FOR grid1 .
        CATCH cx_sy_create_data_error.
      ENDTRY.
    Thanks alot in advance.
    Sri

    Hello ,
    try
        call method g_grid%->set_table_for_first_display
          exporting
            i_save               = p_save_layout%
            i_default            = 'X'
            is_layout            = ps_layout%
            is_variant           = ps_variant%
            it_toolbar_excluding = pt_exclude%
          changing
            it_outtab            = pt_alv_tab1[]
            it_fieldcatalog      = pt_fieldcat%[].
        call method g_grid%->set_toolbar_interactive.
    regards
    Prabhu

  • Type to selection tool quick command not working in InDesign CC

    When I have the type tool selected in InDesign and hold command for the selection tool, it's not working. When I hold the command button it highlights the selection tool, but as soon as I click my mouse, it reverts back to the type tool. Also, when I change the size of my text box it does not resize the text in the box, even if I hold for a a few sec before moving the cursor.

    @Cindy – usually all 3rd party developers will provide some information for installing and uninstalling their products. First see if you can find some information on their web sites.
    Also there should be a dedicated Adobe Extension Manager app where you can look up the installed parts of InDesign. Since I do not have InDesign CC installed, I do not know exactly, but its name should be something like "Adobe Extension Manager CC".
    If you start this app it will show all parts installed with InDesign (or other apps that are installed).
    Usually at the bottom of the list are the 3rd party installed components. They do not state "Adobe Incoroprate System" as author. Never uninstall (remove) the Adobe ones!
    Here a screen grab from my German Adobe Extension Manager CS5:
    If you select one, a new option is available at the right. In my case here the "Entfernen" button ("Remove" in English).
    Uwe

  • Why Does Live View In DW Not Work With BC Template?

    The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

    Hi Alex,
    Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
    Date: Thu, 14 Feb 2013 05:49:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why Does Live View In DW Not Work With BC Template?
        Re: Why Does Live View In DW Not Work With BC Template?
        created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
    Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Tool Bar is not working

    I upgraded my browser. I used Mozilla firefox. Ever since then my tool bar does not work. say if I wanted to go to www.facebook.com. I type in the web address and it will not even go to the site, or the drop down menu

    If you are successfully running Firefox in Safe Mode, this might be an indication that you have too many, or simply have any out of date, Add-ons which creates a too much of a workload for your system.
    You can find out which version of Firefox you are running by choosing About Firefox from the Help entry in the Menu Bar.

  • If you check the don't show this again box when closing multiple tabs, how do you get it to warn you when closing multiple tabs, or to save previous tabs? Checking the warn me when closing multiple tabs box under tools/tabs does not work to solve this?

    I accidentally checked the do not ask me again box when closing multiple tabs. Now I no longer get a warning when closing multiple tabs, and it saves my previous session. I have tried checking and un-checking the warn me box under tools which has not worked. If I open a second window and try to close multiple tabs it will warn me but not on the first window.

    You can reset the warn prefs on the about:config page via the right-click context menu.
    browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
    browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
    browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • My big fish and Norton tool bar will not work with fire fox 4

    My Big Fish Tool Bar and my Norton Tool Bar will not work with firefox4. However they work fine on internet explorer

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Why is my secondary click is not working on the right?

    why is my secondary click is not working on the right?

    system preferences/Trackpad/point and click
    check and uncheck secondary click or alter method
    Try SMC reset
    http://support.apple.com/kb/HT3964
    Pram Reset
    http://support.apple.com/kb/ht1379

  • Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

    Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

    What's the full model number and name of the printer?  I can't seem to find any HP printer with the numbers 3080 in the model number.
    How are you connecting the printer to the Mac?
    I am a printer tech for HP.

  • Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

    Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

    It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
    And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Maybe you are looking for