Why is up next adding songs twice when I use the keyboard shortcut? (windows)

I only encounter this using the mini-player
as far as I know, at least; because the keyboard shortcut doesn't even work on the full sized player.
augh.

You should post that on the Boot Camp  forum, that is where all the Boot Camp and Windows guys hang out.
Good luck.

Similar Messages

  • When I use the keyboard on my iphone 5, the keyboard takes a mind of its own.  If I press a letter sometimeIs it puts the letter twice.  It puts periods when I don't want it to.  And if I hesitate on a letter it starts erasing everything I just typed.

    When I use the keyboard on my iphone 5, the keyboard takes a mind of its own.  If I press a letter sometimes it puts the letter twice.  It puts periods when I don't want it to and if I hesitate, the keyboard starts erasing everything I just typed.  Is there a setting I need to change to make this go away?

    What user troubleshooting have you tried? The user troubleshooting steps are restart, reset, restore from backup and restore as new. Usually a reset will fix most of the unusual actions by the device.

  • When I updated my iPad to iOS 6.1, it crashes when i use the keyboard. What should I do?

    Hi, when I updated to iOS 6.1, I noticed that I crash sometimes when I use the keyboard. Otherwise it's fine. What should I do?

    I was on the phone earlier with apple care for some questions regarding safari, and I mentioned to him about all the problems people are have with the 6.1 upgrade, and asked what could they do if their ipad is out of warranty. He said anyone with an ipad that has problems with a upgrade, has up to 30 after it was released to call apple support for help at no cost.
    This is the route I would take next. let us know how you make out.

  • Synaptics touchpad blocked & delay when using the keyboard in Windows 8.1

    Sometimes (possibly when I use the keyboard and then quickly attempt to move the mouse arrow on the screen with the Synaptics touchpad), I am unable to move the cursor for a half of second-or-so.
    Sometimes I cannot tap to click, maybe, few seconds (it is very annoying).
    There are some Mouse and touchpad settings in Windows 8.1 ("To prevent the cursor from accidentally moving while you type, change the delay before clicks work") which I set to "No Delay (always on)" but it does not work, either.
     I also checked the following registry key:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre​ntVersion\PrecisionTouchPad
    but "AAPThreshold" is set correctly to 0 (No delay).
    But I still experiences problems and touchpad does not work while typing and sometimes also few moments after.
    Using HP Zbook 14, Win 8.1 x64, Synaptics driver 17.0.18.23.

    Hi,
    If you trying connect two Universal apps through Bluetooth, can you check if the
    Windows 8.1 Bluetooth RFComm sample runs fine on both the devices? I successfully tested the Windows 8.1 Bluetooth RFComm sample on Laptop (Windows 8.1) and Windows Phone 8.1 (paired).
    Make sure the service which you are trying to advertise/listen is supported by both the devices. 
    -Sagar

  • Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

    Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

    Thanks everyone. What worked for me was a version of the suggestions above. I had the problem with the ≠ character appearing in all my Photoshop CS6 keyboard shortcuts and rendering them largely unusable. However, I don't have any other keyboards besides US English enabled on my Mac. I do have Spell Catcher installed, which works through the keyboard input method. So, I switched from Spell Catcher back to English (with the US flag), launched Photoshop and presto, my keyboard shortcuts were restored, absent that obnoxious ≠ symbol. Once in Photoshop, if I reselect Spell Catcher, the ≠ symbol returns so I have to run Photoshop without the help of Spell Catcher - or forego the use of keyboard shortcuts while it's on. Since the developer of Spell Catcher passed away last year there will be no more updates to the otherwise very useful utility. Apparently this keyboard shortcut problem in the various guises reported here is linked to some element of the OS X input method in Mavericks, as Photoshop seems to manifest the issue in relation to one specific input source or another. This is the first application in my experience to have a problem with Spell Catcher in OS X 10.9. So I will continue to use it, except in Photoshop. Spell Catcher was never updated for Mountain Lion or Mavericks so people like me will have to use it "at our own risk" as the saying goes. Be that as it may, it does appear to be a bug in Photoshop that's at the root of this matter as different people have somewhat different problems with the OS X input method - not that I expect either Adobe or Apple to do anything about it.

  • Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
    I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
    So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
    Every voice helps

  • My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    Have a look at these. And please say what OS you have.
    http://support.apple.com/kb/ts1411
    http://support.apple.com/kb/ts1367

  • I have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

    i have iPhone 4 but its very slow when i wright message or search for name finally when i use the keyboard its coming very slow

    Try Settings > General > Reset > Reset All Settings.

  • Whine hiss at beginning of songs and when scrolling using the batt

    I have the zen xtra 30gb and love it except when playing it using the battery it makes a whiny hiss at the bigging of the songs and when i am scrolling or using any buttons while nothing is playing. When i use the ac adapter no noise at all. the noise is only there using the battery. My wife has the 40 gb version and does'nt have this problem. I even switched batteries with hers to see if the battery was the problem but did'nt make a difference. Do I have a defecti've unit's

    i dont think that is the battery making the noise...its most likely the hard dri've. I wouldnt be too concerned about it as long as it works fine

  • Keynote crashing when using the keyboard shortcut to play the presentation

    This has happened twice to me now in the last two days. I haven't been using Keynote regularly, but will be giving more lectures at uni, so hope this is something that can be solved. Each time Keynote crashed, I had an unsaved Word document but when my macbook restarted, the word document was still there, and the keynote presentation was gone. Is there any way to auto-save keynote presentations, and no, I don't have a time capsule yet.
    Thanks, Derek

    It is more of because when your keyboard shortcut is set to that, the command given to the computer is only to shutdown the default way, which Apple made it to reopen windows when logging back in. And when u said that it was a preference to reopening windows when logging back in, it is not a preference. It is more of a question whether u want to reopen when u are shutting down/restarting your computer.
    I also have a similar problem, but it is not about the keyboard shortcuts. I want to create a program to help restart into bootcamp, but when I restart back into Mac OS, it helps reopen the windows.

  • The letters on my iPad keep repeating when I use the keyboard

    The letters keep repeating when I use the keyboard

    Welcome to Apple Support Communities.
    Multiple letters result when you 'hold down' a key too long.
    For best results, touch the on-screen 'keyboard' lightly and quickly with your fingertips.
    I find it is easier to type with more accuracy on the larger 'landscape' keyboard, because the keys are spaced better for my fingers. 
    If you are trying to use a compatible iPhone or iPod Touch app, use the 2x button in the lower right corner to enlarge the iPhone keyboard. (But it still won't be the same layout as the iPad.)
    If you've never done much typing, it might help to use a typing tutor app. Several are available in the iTunes App store.
    If you have a lot of text to enter (writing papers, transcribing recordings, writing a novel), you might consider purchasing a compatible wireless keyboard.  In my experience, two different USB keyboards I own do work when plugged into the USB Camera Connection kit, even though the iPad may 'complain' about the keyboard being an unsupported device.
    Message was edited by: kostby

  • Why do I get a memory leak when I use the Write Data Storage VI in a loop

    I have a large application that I am collecting various data points from. For the most part they are simple scalar values that need to be logged on a regular basis.  I was attempting to use the new TDM files and the storage VI's  I though everything was working until I looked at the taskmanager and noticed that when the logging loop ran my CPU eventually went to 100% and the process memory grew from about 80,000K to 100,000K and eventually locks up the system. 
    I am using a state machine arch. 
    State 1 - open file (open create) mode) 
    State 2 - Write Channel Group Properties
    State 3 - Loop writes 24 distinct data points to a TDM files in append mode
    State 3 - Repeats [creating new rows of the same 24 data point (wait time about 1 sec)]
    State 4 - Close file on exit.
    Any help on this problem would be appreciated.

    The way I see it, it should be this way.
    Message Edited by Pana-man on 09-30-2005 08:15 PM
    Message Edited by Pana-man on 09-30-2005 08:18 PM
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?
    Attachments:
    nextWeek.jpg ‏43 KB

  • Why do I get a blue screen when I use the NIDAQ driver.

    I get IRQL_NOT_LESS_OR_EQUAL.
    Address fc792324 has base at fc6f8000 Nidaq32.sys and Address fc7028e3 has base at fc6f8000 Nidaq32.sys.
    The system is running on Windows NT 4.0. The application is built using Application Builder and LabView 5.1.1. The NIDAQ 6.9.0 is used.
    Please help me.

    uffe:
    You seek...Yoda...Help you...I...will..
    This is a kernel mode problem with your NIDAQ32.SYS driver. I believe
    that you can pretty much rule out problems with LV5.1.1 or app
    builder. Your problem
    You have run into a classic BSOD message. It may not always occur so
    it can be really frustrating to diagnose. There may be some
    workarounds you can implement at the application level but it still
    needs to be fixed at the kernel (O/S) level so you're going to need to
    contact NI.
    I've had this same problem error message in the past but not with DAQ
    cards. As I recall, in one case there was a problem with a spinlock
    in the SCSI driver (.sys) file which protected access to the hardware
    I was using.
    What is a spin lock? A spin lock is a special synchronization
    construct used by device driver developers to protect access to
    critical sections of their code usually for hardware access. It is
    the kernel mode equivalent to a VISA resource lock or a semaphore in
    LabVIEW.
    For more on spin locks see:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/kmarch/hh/kmarch/k101_97hu.asp
    Work-around Possibility #1: Do you have two different parts of your
    code trying to access the DAQ card simultaneously? If so, providing
    your own VISA resource locks or semaphores at the application level
    may cure the problem even if the kernel mode driver is failing to
    protect access to the card like it should.
    Even if this fixes the problem PLEASE report it to NI so that they can
    fix it properly in the .sys file and let other users know that the
    workaround I suggested works.
    See:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/network/hh/network/103ndisx_7mk2.asp
    Work-around Possibility #2: I don't know the details of setting up
    your DAQ card so if this question doesn't make any sense don't worry
    about it. Are you setting up the card with some empty array, zero
    memory size, or empty string value or something? I had this problem
    with a reflective memory card driver.
    Sometimes this can screw up a driver that isn't checking for this sort
    of thing with the result of it trying to reference a null ptr or
    something. Again, even if you fix the problem by error checking the
    values before you give them to the DAQ driver VI, make sure you tell
    NI about it.
    This explanation also jibes with what Microsoft has to say on
    IRQL_NOT_LESS_OR_EQUAL. See:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/6077.asp
    3) There may be other explanations for your problem but these are two
    that I've run into personally. Try going to www.microsoft.com and
    doing a search on IRQL_NOT_LESS_OR_EQUAL if my two possibilities
    aren't the cause of your problem.
    4) Make sure you have the latest driver from NI for the NIDAQ. NI may
    have already fixed your problem in a later version of the NIDAQ
    driver.
    5) Also I would recommend making sure that you have the latest service
    pack (SP6A) installed or that you go ahead and upgrade to Win2000. As
    I recall when I had my one of my driver problems it was with an
    earlier SP release and upgrading SP's helped.
    6) If none of these suggestions help, you need to call NI help line
    (800-IEE-E488) and report this to see if they know about it so that
    they can give you a work around and see if they can recreate the
    problem and then fix it.
    Doug De Clue
    LabVIEW developer
    [email protected]
    uffe wrote in message news:<[email protected]>...
    > I get IRQL_NOT_LESS_OR_EQUAL.
    > Address fc792324 has base at fc6f8000 Nidaq32.sys and Address fc7028e3
    > has base at fc6f8000 Nidaq32.sys.
    >
    > The system is running on Windows NT 4.0. The application is built
    > using Application Builder and LabView 5.1.1. The NIDAQ 6.9.0 is used.
    >
    > Please help me.

  • Why is Pages crashing when I use a keyboard shortcut

    Finally discovered how to pull up a definition of a word (hover mouse and ctrl+cmd+d). Except whenever I do it, the definition pops up and Pages immediately crashes.
    Solution?

    You can't open a Word document in Firefox. You need to save the file and open it with your MS Office software.
    *http://kb.mozillazine.org/File_types_and_download_actions
    *https://support.mozilla.com/kb/Managing+file+types

  • AppleWorks 6 crashes when I use the keyboard...

    ...in word processing, spreadsheet, or a drawing! I can draw or create a field, but as soon as I attempt to type within any document, e.g., enter dimensions in a drawing, AW quits instantly. It makes no reference to the document when I start up again, though I tried saving an empty wp doc to see what would happen.
    I have cleaned out the preferences, except for the button bars, and gotten rid of the contents of the "recent" file, etc.
    What next? Why is it doing this? I'd appreciate any help or ideas you may have.
    Thanks!

    Welcome to Apple Discussions
    Try this user tip.

Maybe you are looking for