Why is Verizon trying to connect to my computer

I have an IMAC computer. In my console message log, I see that Verizon ( 173.79.214.66:53) is making Stealth connects to my computer every few seconds. These attempts are all being blocked by my Firewall. Why is Verizon trying to make these connects?

After looking that IP Address and finding the rDNS, I find it hard to believe that Verizon is trying to connect to your computer.
rDNS for that IP Address is pool-173-79-214-66.washdc.fios.verizon.net
What more likely is happening and I don't know why at this time, is that a Verion customer is trying to connect to your computer.
I can take educated guess(es) as to why the customer is trying to connect to your computer.
#1 Perhaps your computer's public IP Address is listed as a public DNS Server?
For example, the user might be using the tool from
http://www.grc.com/dns/benchmark.htm and is trying to buid a custom list of the top DNS Server(s), based upon their location.
Or the user might be using the tool from
http://code.google.com/p/namebench/
The programer(s) of these tools has not removed your IP Address in the list of IP Address(es).
For the grc.com DNS tester the list is at http://www.grc.com/dns/resolvers.csv
For the google DNS tester, I found the list by:
a) From that URL that I gave earlier, I clicked on Source,
b) I found the URL for read only access.
c) Went to that URL
d) Browsed to trunk/config,
e) Then clicked on servers.csv
#2 Perhaps they made a typo when entering in what DNS Server (or DNS Servers) to use?
For example if you look at the list of DNS Server(s) in the Google DNS Tester, you will notice that there are DNS Servers that are blacklisted (or rejected) because the at least one user made a typo.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

  • Why is Mail trying to connect to an unknown mail server (and how do I stop it)?

    Hi - I'm worried that someone has hacked into my system so that it tries to connect to a fake mail server (perhaps to send spam)? I usually have the activity window open when Mail is running, and noticed that it was trying to connect to an unfamiliar mail server the other day - it was shown as an IP address whereas all the mail servers in my mail accounts have names rather than IP addresses ... so I copied the IP address down and searched for it (196.201.4.6), to find that it is run by malawi.net ... in Africa. I recently upgraded to Mac OS Lion, so initially I had figured that it was showing the mail server address differently, but I couldn't think of any reason that my email servers would be in Malawi!
    By now I was getting worried: I checked all my mail accounts to be sure that something had not changed, and confirmed that none of my accounts used this mail server (or mentioned the IP address); and confirmed that the "Connecting to server "196.201.4.6"" activity message only appeared when I first reconnected to the internet (i.e. now when I manually clicked on "get mail") ... which suggests to me that it is a hidden process somewhere?
    I don't have a virus checker, but downloaded ClamXav and ran a check on my user folders ... but found nothing.
    Any thoughts on what this might be, or - if it is something malicious or externally controlled - how I can remove it?
    Thanks - andy

    Hi - "display remote images in HTML messages" was already deselected, so I don't think it was an HTML message connecting.
    But your response made me wonder about whether it was something else in an old email that was causing the problem - I had a search and found some emails from back in 2006 (when I did some work in Malawi for CARE) that were from the mail server (mailer.malawi.net = 196.201.4.6) that has been appearing. However, I still don't understand why (six years later) Mail is now trying to connect to this server ... I'm pretty sure that it never used to happen (and I have been a full-time Mac user since 2003), as I always have the activity window open and would have noticed, so it is only since I upgraded to Lion last week that it started. Any thoughts? I could delete/archive the old emails, but I would really like to understand what is happening?
    Thanks - andy

  • Why is ipod trying to connect out to a remote address -unknown?

    Hi Guys,
    When I check the security logs on my wireless routers firewall I get the following warning  messages which relate to a family members 4th Gen Ipod Touch.
    Whats  it trying to do & why?.
    Under advice I turned off UpnP yesterday afternoon.:
    The 192xxx .66 realtes to the family members Ipod. What is going on here & what is The Ipod trying to do  - noone was anyhwere nearer it at this time of the morning.
    Very grateful if anyone could explain what these messages mean & perhaps  help me understand what the Ipod is trying to do - without anyone using it?.
    06:03:28  28 Apr
    IDS proto parser : tcp invalid urgent offset (1 of 15) : 192.xx.66 126.233.94.94 0052 TCP 53766->443 [.FA.U.] seq 3918315724 ack 248545603 win 16383
    06:00:22  28 Apr
    IDS proto parser : tcp invalid urgent offset (1 of 1) : 192.xx.66 126.233.94.94 0052 TCP 53766->443 [.FA.U.] seq 3918315724 ack 248545602 win 16383
    Is it at all possible that an Ipod can have a Virus? or Malware - "Kik" social networking App was downloaded last week & dissapeared within an hour. Later face time stopped working but is back now. Little worried that this Ipod has somehow been hacked.
    Apprecaite any help.
    Thanks.

    Hi - "display remote images in HTML messages" was already deselected, so I don't think it was an HTML message connecting.
    But your response made me wonder about whether it was something else in an old email that was causing the problem - I had a search and found some emails from back in 2006 (when I did some work in Malawi for CARE) that were from the mail server (mailer.malawi.net = 196.201.4.6) that has been appearing. However, I still don't understand why (six years later) Mail is now trying to connect to this server ... I'm pretty sure that it never used to happen (and I have been a full-time Mac user since 2003), as I always have the activity window open and would have noticed, so it is only since I upgraded to Lion last week that it started. Any thoughts? I could delete/archive the old emails, but I would really like to understand what is happening?
    Thanks - andy

  • My mac is always  trying to connect to another computer which is not on the networkc

    My mac is always trying to connect to one of my Mac which is not on the network..
    I cannot find why and what application is doing that ?

    You might want to monitor this thread. Thomas Reed usually solves problems:
    https://discussions.apple.com/message/20341397#20341397

  • Why does the iphone not connect to the computer when I am trying to up load the new version?

    what do I have to do to upload, the computer and Iphone does a time out after upload is complete. it does a timeout?

    what am i doing wrong?

  • Using VPN on ipod touch and trying to connect to my computer wirelessly

    OK HI everyone I'm new to this forum thing here in apple this is my first thread so please don't flame me.
    (It happens allot on other forums, not to me but to other newbies)
    anyway focusing on the task at hand
    so im trying to find a way to connect to the internet on my ipod NOT using a wifi connection, I noticed under GENERAL settings when you go under NETWORK there is WI-FI or VPN and im trying to see what's all that about
    and i also have usb broadband modem and I found some Server IPV address or something like that under my modem Status so I'm trying to see if i can somehow work with any of these things to connect to the internet on my ipod
    BTW i have an ipod 3rd Gen and a Cricket Modem and Windows Vista OS

    Sorry, but the only way that you can connect your iPod to the internet is via WiFi. To use VPN, you must be connected, again via WiFi, to the internet. VPN (used mostly by businesses) allows you a super secure way to access internal networks via a public network (the web).
    You must have a wireless router to connect to allow WiFi. An ordinary router isn't going to be able to do it. See this article: http://computer.howstuffworks.com/wireless-network.htm for some basics on wireless networking.

  • My i phone screen is black and an apple on it. I'm trying to connect it to computer to i tunes and it's not registering under devices. Any ideas?

    My i phone screen is black and has an apple on it.  I tried connecting it to my computer but it is not recognizing it under devices.  Any Ideas?

    You may have done this, but I'd try the home button/power button shutdown first....it sounds like it is hung up in the "boot" process somehow...if that doesn't work as paulcb said, recovery mode may be the only option..I suppose you could also try and let the battery fully discharge...

  • Going crazy trying to connect iPhone to computer/iTunes

    I had iTunes installed on my computer, and everything was fine. Didn't have a single problem with it. Then, when I got my new motherboard and processor yesterday, I reinstalled Windows 7, something I do any time I get a new motherboard. So I install iTunes, that goes perfectly fine. Load that up, and plug in my iPhone. First, it pops up with the driver installing for "Apple Mobile Device USB Driver", which goes fine, and uses the usbaapl64.sys driver that the Apple site says it should. Then it tries installing the driver for "MTP USB Device", which fails. And iTunes gives me the error "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)." or "iTunes could not connect to the iPhone "Jon's iPhone" becuase an invalid response was received from the device.". Varies from time to time when I plug it in.
    I run the iTunes diagnostic for iPhone/iPod Connectivity, and it passes everything except the last one "No iPhone or iPod found." It directs me to this article (http://support.apple.com/kb/TS1363) for help, which none of the steps help. I've also done everything on this article (http://support.apple.com/kb/TS1495), and no luck. Tried redownloading iTunes and installing about 20 times. Even downloaded older versions of iTunes. Nothing. Uninstalled drivers, reinstalled drivers. Nope. ****, I even reinstalled Windows 7 again to make sure nothing was messed up in the installation. No luck.
    I've tried Googling the error, and just about anything I can think of, and nothing is helping. If anybody had any ideas, it'd be great.

    Yes it is documented through forums well now. You may get 0XE8000065, or error code -6999, or error code -48 or combination.
    1. First and best fix is update your BIOS
    2. Some people have been able to switch from back USB port to front and it worked.
    3. Others bought a PCI USB card and installed it on their computer and then connected iPhone to that.
    Message was edited by: iphone3Gguy

  • Samba timeout when trying to connect to a computer in a workgroup

    Hello, seems like the best section to post this in...
    Right after I installed my Archlinux setup, I spent a bunch of time trying to get samba running perfectly, mainly, it was just so that other (window$) computers could access mine. Upon getting it working perfectly, both ways, I didn't use it for a while (which is typically the case).
    So today, I need to transfer lots and lots of data, but via Dolphin, browsing the workgroup (which I clicked), lists all the computers that are there, including my own (this).
    That's good so far, but after I browse to one of those computers (even my own!!), shortly thereafter, I receive a timeout error.
    I have tried restarting the samba daemon, netfs, I also tried stopping network manager, and starting the network daemon myself, hoping it was network manager's brokenness that was the problem. Nope.
    Still left in this situation...and nothing that I can remember, has changed since the last time, I didn't screw with config files or anything. Although, I do think I changed routers between this time, I also remember seeing some updates for samba-related packages.
    All out of ideas, I posted here.
    I can post my smb.conf file..or anything else for that matter, if you want. I just want this problem to be solved, and currently am forced to boot into window$ to transfer lots of data. Naturally, I can't do anything during this time, when not in linux....and it kills me a little bit more each time I have to see it
    EDIT: Also note that, I tried using the default config, but I still get timeouts(and restarting samba daemon of course). With 'smbtree', it lists all of the shares available on the workgroup also. I also use the gamin program, as opposed to FAM. Originally, I followed the wiki, and that was how I get it working in the first place, but no longer does it work correctly. The logs in /var/log/samba/ do not show anything interesting, and in fact, only show about 1-2 lines, just saying that it started..
    I also had it say about a firewall possibly being in use, but on a reload/retry, it returns to a timeout error. I do not have any firewalls that I am aware of, on.
    Update: Well I figured out if I run the following command: smbclient '\\NAS\Data' that I will then be taken to a prompt where I can do ls, cd, etc, and browse that share perfectly. What's going on here? Dolphin still times out on it and I would prefer to use a GUI for this..
    Last edited by sreich (2009-06-26 17:00:14)

    Well I decided to try to use 'smb4k', which I just recently found, it also sees all of the computers on my network, but it also sees their shares after I browse into it. Unfortunately, it fails to mount any of them...
    "mount error: could not resolve address for NAS: Name or service not known
    No ip address specified and hostname not found"
    That is the message I receive after clicking (mounting) on one of the shares of the 'NAS' computer, the one on my network.
    Perhaps this error will make things a bit more clear?
    I've been even looking at the docs at samba.org, trying to debug this issue...
    UPDATE: Seem to have limited the problem down, at least now I can mount a share on a computer but *only* if I specify the IP address manually.
    So it appears that it cannot resolve the name of said computer/share, to an IP... what could be causing this, and how can I fix it?
    Last edited by sreich (2009-06-26 19:17:12)

  • Trying to connect a home computer using Outlook 2013 to my business Exchange server 2010.

    I have a new Dell XPS with Outlook 2013 installed and the native email client installed. I was able to enter in my exchange 2010 credentials to the native email client and it worked. when I try to enter the credentials for Outlook 2013 I received an error
    message.
    "the name cannot be resolved. the connection to Microsoft Exchange is unavailable.
    outlook must be online or connected to complete this action"

    Hi,
    To narrow down the cause, I’d like to recommend the following troubleshooting:
    Check if you can connect to your Exchange server externally with another account.
    Double confirm the error message when test your RPC over HTTP connectivity.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Strange message when trying to connect to another computer via SMB

    Hello,
    I sucessfully set up a MAC/VISTA network and used it for the past days. I connected through CMD+K smb//:<my_ip>
    But now I get everytime the following message when doing that:
    _*"Connection failed" - This data server is already active on your computer. Please access the files and volumes locally.*_
    (This is my translation of the german message, so it might not be the correct translation)
    Anyway, I can't find the share in Finder, it is not there anymore. What does this message means, I'm confused??

    open up your terminal (/Applications/Utilities/Terminal.app)
    Type in the following:
    cd /Volumes <enter>
    ls -al <enter>
    Now see if the name of your Vista PC is in the list. If it is, unmount them (there may be multiple instances)
    umount <Name of Volume> <enter>
    You may have to use the "force" flag, like so:
    umount -f <Name of Volume> <enter>
    You'll have to be root to do that.

  • Ipod trying to connect to new computer

    I,ve bought a new pc and have transferred my itunes library from my old laptop to the new itunes on the new desktop. ITunes new PC is telling me I can't replicate. Help.

    Have you tried uninstalling and re-installing iTunes and all other Apple software to see if that makes a difference?  Use the exact instructions in this article.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    B-rock

  • Why is my iPad not connecting to any computer??

    When I connect my iPhone and ipod to the computers, they all recognise but my Ipad doesn't.. It's the first iPad with the lightening connector, I think the 4th gen 16gb with just wifi.. Please help

    Apple seems to be having issues. Just wait it out and come back in a bit. If the issue is indeed on their end, nothing you can do with your device can fix it.

  • Why is my phone automatically connecting with my computer( txt msg, notifications, etc.)???

    like i said

    If by continuity you mean handoff or other functions like that ,then i think i have all that stuff turned off and I'm still getting notifications and txt on my computer.Furthermore, if the user has to go into all kinds of sub menus to turn off an annoyance, then this just adds  another reason apple products can be very annoying. there should be one submenu to control connectivity and also the ability to turn it off all together if one wants to. Is there an actual connectivity menu I'm not seeing somewhere? iPhone 6 8.1 / Mac pro running yosemite

  • HT200160 mac keeps trying to connect to a server that no longer exists

    every so often throughout the day, i'll get a error dialong telling me that my mac can't connect to a server because it no longer exists. This server was my old machine that has since been renamed on the network.
    i don't want it to connect, i also don't want it to ask to connect. how do i find out why it's trying to connect, and how do i end this madness?

    Boot in safe mode as directed here:
    Starting up in Safe Mode
    Log in and see whether you still have the problem. If you don't, it's caused by one of your login items or a system modification that loads at startup or login.
    If the problem isn't resolved that way, other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application
    See iMovie Troubleshooting: Connection Failed, Server Does Not Exist.

Maybe you are looking for

  • Output to an HDMI TV

    Hello everyone, I am wanting to connect my MacBook (Intel Core2 Duo 2Ghz) to my TV, a Pioneer PDP-434HDE (the actual box that all TV inputs are connected is the Pioneer PDP-R04E). I have an Apple mini-DVI to DVI adapter, connected to a DVI-HDMI cable

  • Japplet with imageicon

    Hi, im working on a simple paint program in a Japplet. I'm stuck right now on getting an icon on a button by giving the ImageIcon constructor a file path. I get an error when I try to run the applet with the imaging code in, not without. I've read in

  • MSI N660 TF 2GD5/OC BIOS update

    I have MSI N660 TF 2GD5/OC, s/n 602-V287-050B1302029937. Current BIOS version is 80.06.28.00.39 (from Afterburner) How to update BIOS ? Thanks in advance.

  • Window inside another window in SAPScript

    Hi , Is it possible to create a window inside a main window in SAPScript ? If so,how ? Please help. Thanks&regards Ananya Mukherjee

  • Why are some fonts so think?

    Hello, I was wondering if anyone knew why some of the fonts that I am using in FCP(Agency, AvantGarde, Eurostile) look like they have been bolded while staying as they should in other applications like Motion. Both applications are referencing the sa